Thermodynamic conditions of framework grain dissolution of clastic rocks and its application in Kela 2 gas field

Feldspar and clastic debris are the most important constituent framework grains of sedimentary clastic rocks and their chemical dissolution plays an essential role in the formation and evolution of the secondary pore in the reservoir rocks. On the basis of thermodynamic phase equilibrium, this study investigates the chemical equilibrium relationships between fluid and various plagioclase and K-feldspar in diagenesis of the sediments, particularly, the impact of temperature and fluid compositions (pH, activity of K+, Na+, Ca2+ and so on) on precipitation and dissolution equilibria of feldspars. Feldspar is extremely easily dissolved in the acid pore water with a low salinity when temperature decreases. The dissolution of anorthite end-member of plagioclase is related to the Ca content of the mineral and the fluid, higher Ca either in the mineral or in the fluid, easier dissolution of the feldspar. Moreover, the dissolution of albite end-member of plagioclase is related to Na of both the mineral and fluid,     

Geochemistry of ore-forming fluids and geological significance of the Kuoerzhenkuola gold field in Xinjiang, China

The Kuoerzhenkuola gold field (including the Kuo- erzhenkuola and the Buerkesidai gold deposits), lo- cated 68 km east of Jimunai County in northern Xing- jiang, China, is an important component of the Sawuer gold belt which is the eastward extending part of the Zarma-Sawur gold-copper belt in Kazakhstan. Some studies are concerned with the geology of the gold ores[1―3], the associated volcanic rocks[4], radiogenic isotope[5―8], and the ore-forming environment[8]. Most researchers inferr…     

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

Analytical modeling on consolidation of stiffened deep mixed column-reinforced soft soil under embankment

Stiffened deep mixed (SDM) column is a new ground improvement technique to improve soft soil, which can be used to increase bearing capacity, reduce deformation, and enhance stability of soft soil. This technique has been successfully adopted to support the highway and railway embankments over soft soils in China and other countries. However, there have been limited investigations on its consolidation under embankment loading. This paper developed an analytical solution for the consolidation of embankment over soft soil with SDM column in which core pile is equal to or shorter than outer DM column. The consolidation problem was simplified as a consolidation of composite soil considering the load shear effect of core pile. The developed solution was verified by a comparison with the results computed by three-dimensional (3-D) finite element analysis. A parametric study based on the derived solution was conducted to investigate influence factors—length of core pile, diameter of core pile, diameter of SDM column, modulus of DM column, and permeability coefficient of DM column—on the consolidation behavior of SDM column-supported embankment over soft soil. The developed solution was applied to a case history of SDM column-supported embankment, and a good agreement was found between the predictions and the field measurements.     

A cavity expansion–based solution for interpretation of CPTu data in soils under partially drained conditions

A cavity expansion–based solution is proposed in this paper for the interpretation of CPTu data under a partially drained condition. Variations of the normalized cone tip resistance, cone factor, and undrained-drained resistance ratio are examined with different initial specific volume and overconsolidation ratio, based on the exact solutions of both undrained and drained cavity expansion in CASM, which is a unified state parameter model for clay and sand. A drainage index is proposed to represent the partially drained condition, and the critical state after expansion and stress paths of cavity expansion are therefore predicted by estimating a virtual plastic region and assuming a drainage-index–based mapping technique. The stress paths and distributions of stresses and specific volume are investigated for different values of drainage index, which are also related to the penetration velocity with comparisons of experimental data and numerical results. The subsequent consolidation after penetration is thus predicted with the assumption of constant deviatoric stress during dissipation of the excess pore pressure. Both spherical and cylindrical consolidations are compared for dissipation around the cone tip and the probe shaft, respectively. The effects of overconsolidation ratio on the stress paths and the distributions of excess pore pressure and specific volume are then thoroughly investigated. The proposed solution and the findings would contribute to the interpretation of CPTu tests under a random drained condition, as well as the analysis of pile installation and the subsequent consolidation.     

Constitutive modelling of fine-grained gassy soil: A composite approach

Fine-grained marine sediments containing large undissolved gas bubbles are widely distributed around the world. Presence of the bubbles could degrade the undrained shear strength (s_u ) of the soil, when the gas pressure u_g is relatively high as compared with the effective stress in the saturated soil matrix. Meanwhile, the addition of bubbles may also increase s_u when the difference between u_g and pore water pressure u_w becomes smaller than the water entry value, causing partial water drainage from the saturated matrix into the bubbles (bubble flooding) during globally undrained shearing. A new constitutive model for describing the two competing effects on the stress-strain relationship of fine-grained gassy soil is proposed within the framework of critical state soil mechanics. The gassy soil is considered as a three-phase composite material with compressible cavities, which allows water entry from the saturated matrix. Bubble flooding is modelled by introducing an additional positive volumetric strain increment of the saturated clay matrix, which is dependent on the difference between pore gas and pore water pressure based on experimental observations. A modified hardening law based on that of the modified Cam clay model is employed, which in conjunction with the expression for bubble flooding, can describe both the detrimental and beneficial effects of gas bubbles on soil strength and plastic hardening in shear. Only two extra parameters in addition to those in the modified Cam clay model are used. It is shown that the key features of the stress-strain relationship of three fine-grained gassy soils can be reproduced satisfactorily.     

板桥-合水地区长63储层成岩相孔隙结构特征及优质储层分布

利用铸体薄片、扫描电镜、常规压汞、恒速压汞及相渗等资料,研究了板桥-合水地区长6₃储层成岩相类型及其微观孔隙结构特征,总结了不同成岩相的测井响应特征,确定了纵向及平面分布规律。结果表明优质成岩相的展布受沉积相、成岩作用与孔隙结构共同控制,尤其是喉道分布才是控制砂岩储层渗透性的主要因素。水云母胶结-残余粒间孔相和水云母胶结-长石溶蚀相储层主要分布于半深湖相重力流复合水道浊流沉积中,细-微细喉道发育,孔喉连通性好,渗流能力最好,油水呈相对均匀的渗流,孔隙内的油气极易通过喉道被开采出来;绿泥石胶结相、水云母胶结弱溶蚀相储层位于分支水道边缘,呈孤岛状分布,孔喉半径小但分布均匀,渗流能力中等-差;碳酸盐胶结相、碳酸盐+水云母胶结相储层主要发育在分支水道间,孔隙结构发育程度差,喉道细小且孔喉连通性差,富集于孔隙中的油气难以通过小喉道,采收率低。     

河南义马地区页岩气储层孔隙非均质性

运用高压压汞、液氮吸附及渗透率测试等实验,利用极差、突进系数、变异系数等参数,表征煤系页岩孔渗特征及孔隙层间非均质性,分析孔隙层间非均质性主控因素。结果表明:河南义马地区上、下石盒子组泥页岩微孔与小孔较为发育,山西组大孔较为发育,分别提供了气体吸附附着面积和储存运移空间;上石盒子组孔容与孔径相对偏差最小,孔隙分布均匀,山西组比表面积相对偏差最小,表面积分布均匀;随围压增大,渗透率不断降低,且满足负指数相关关系;渗透率级差、突进系数和变异系数显示下石盒子组渗透率非均质性较弱,山西组渗透率非均质性很弱,更易于压裂开发。非均质性宏观上主要受沉积物质组成和构造改造作用影响,微观上受成岩演化影响。     

深部盐矿勘探钻井液研究与应用

ZK001井钻遇地层为大段泥岩,部分地层为页岩、含盐泥岩、盐膏层。在泥页岩地层进行大口径全面钻进,钻速较快,固控设备能力有限,引起钻屑中粘土颗粒重复性膨胀、软化及裂解分散,最终可能造成粘土侵,对井内安全造成威胁。深部岩膏层易溶于水,从而导致盐层蠕变、井径扩大、井壁失稳等问题。以ZK001井为例,通过优化钻井液体系及现场施工工艺,解决了地层强造浆、盐层失稳等问题。通过岩石力学测试、阳离子交换容量测试、钻井液体系优选及性能测试,确定了上部地层采用聚合物钻井液体系,下部含盐层取芯钻进转换为饱和盐水钻井液体系。通过选用合适的钻井液密度、粘度、切力量、滤失量、含盐量等指标,可以有效控制上部泥岩井壁稳定、含盐层蠕变、井径扩大的问题。钻进过程中钻井液性能稳定且易于维护,从而保证了钻进工作安全、高效、顺利的进行。