采用掏土纠偏及袖阀管加固技术整治铁路桥涵不均匀沉降

某钢筋混凝土箱形铁路桥发生不均匀沉降,经方案优化对比,采用了沉井射水掏土纠偏和塑料袖阀管注浆加固进行综合治理。介绍了其施工工艺和治理效果。     

地下洞室超欠挖问题非线性有限元分析

运用数值分析的方法,采用ANSYS10.0版有限元分析程序对洞室超欠挖进行三维模拟计算,分析了不同超挖位置、超挖深度、超挖数量等对洞室围岩稳定性的影响,得出了超欠挖部位应力集中数值解及塑性区产生的影响范围,为地下工程掘进施工和初期支护设计提供重要的参考依据。     

土钉面层配筋量计算原理及实例分析

本文在分析国内外大量文献资料的基础上,对土钉面层的受力机制进行了详细的讨论和分析,认为土钉面层主要受到钉体对面层的集中荷载及土体对面层的分布荷载作用。引入半弹性体和布辛涅奈斯克理论推导出了较为实用的土钉面层配筋量计算公式,并通过实例验证了该公式的正确性。     

Theoretical investigation of large-amplitude waves in granular soils

A theoretical investigation of plane waves in granular soils is presented. Dynamic equations are derived with the use of the hypoplasticity theory for granular materials. For numerical calculations the material parameters of Karlsruhe sand are used. Wave speeds as slopes of characteristics of the dynamic equations are calculated for various stresses and densities. It is shown that under certain conditions the dynamic equations lose hyperbolicity and the initial boundary value problem thus becomes ill-posed. Two types of ill-posedness are found, known as flutter ill-posedness and stationary discontinuity. The latter is shown to arise at higher shear stress than the former. A comparison is made between dynamic ill-posedness and stability of static equilibrium. With the use of the second-order work stability criterion it is found that the dynamic equations lose hyperbolicity when the static equilibrium under a dead load is still stable. Numerical solutions to the problem of propagation of boundary disturbance in a half-space are obtained. Owing to dilatancy and contractancy of the granular material, a purely transverse disturbance induces a longitudinal component of velocity in the wave, and vice versa.     

Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elastic–plastic soil constitutive model

Simulation of large deformation and post‐failure of geomaterial in the framework of smoothed particle hydrodynamics (SPH) are presented in this study. The Drucker–Prager model with associated and non‐associated plastic flow rules is implemented into the SPH code to describe elastic–plastic soil behavior. In contrast to previous work on SPH for solids, where the hydrostatic pressure is often estimated from density by an equation of state, this study proposes to calculate the hydrostatic pressure of soil directly from constitutive models. Results obtained in this paper show that the original SPH method, which has been successfully applied to a vast range of problems, is unable to directly solve elastic–plastic flows of soil because of the so‐called SPH tensile instability. This numerical instability may result in unrealistic fracture and particles clustering in SPH simulation. For non‐cohesive soil, the instability is not serious and can be completely removed by using a tension cracking treatment from soil constitutive model and thereby give realistic soil behavior. However, the serious tensile instability that is found in SPH application for cohesive soil requires a special treatment to overcome this problem. In this paper, an artificial stress method is applied to remove the SPH numerical instability in cohesive soil. A number of numerical tests are carried out to check the capability of SPH in the current application. Numerical results are then compared with experimental and finite element method solutions. The good agreement obtained from these comparisons suggests that SPH can be extended to general geotechnical problems. Copyright © 2008 John Wiley & Sons, Ltd.     

Numerical simulation of fully saturated porous materials

Fully coupled, porous solid–fluid formulation, implementation and related modeling and simulation issues are presented in this work. To this end, coupled dynamic field equations with u?p?U formulation are used to simulate pore fluid and soil skeleton (elastic–plastic porous solid) responses. Present formulation allows, among other features, for water accelerations to be taken into account. This proves to be useful in modeling dynamic interaction of media of different stiffnesses (as in soil–foundation–structure interaction). Fluid compressibility is also explicitly taken into account, thus allowing excursions into modeling of limited cases of non‐saturated porous media. In addition to these features, present formulation and implementation models in a realistic way the physical damping, which dissipates energy. In particular, the velocity proportional damping is appropriately modeled and simulated by taking into account the interaction of pore fluid and solid skeleton. Similarly, the displacement proportional damping is physically modeled through elastic–plastic processes in soil skeleton. An advanced material model for sand is used in present work and is discussed at some length. Also explored in this paper are the verification and validation issues related to fully coupled modeling and simulations of porous media. Illustrative examples describing the dynamical behavior of porous media (saturated soils) are presented. The verified and validated methods and material models are used to predict the behavior of level and sloping grounds subjected to seismic shaking. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental study and constitutive modelling of elasto‐plastic damage in heat‐treated mortar

This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (w/c) ratio of 0.5. First, a whole set of varied experimental results is provided, in order to either identify or validate a thermo‐mechanical constitutive model, presented in the second paper part. Experimental responses of both hydraulic and mechanical behaviour are given after different heating/cooling cycling levels (105, 200, 300, 400^°C). The reference state, used for comparison purposes, is taken after mass stabilization at 60^°C. Typical uniaxial compression tests are provided, and original triaxial deviatoric compressive test responses are also given. Hydraulic behaviour is identified simultaneously to triaxial deviatoric compressive loading through gas permeability K_gas assessment. K_gas is well correlated with volumetric strain evolution: gas permeability increases hugely when ε_v testifies of a dilatant material behaviour, instead of contractile from the test start. Finally, the thermo‐mechanical model, based on a thermodynamics approach, is identified using the experimental results on uniaxial and triaxial deviatoric compression. It is also positively validated at residual state for triaxial deviatoric compression, but also by using a different stress path in lateral extension, which is at the origin of noticeable plasticity. Copyright © 2009 John Wiley & Sons, Ltd.     

Multiscale approach to geo‐composite cellular structures subjected to rock impacts

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.     

华北平原某集约化种植区地下水污染探讨

以华北平原某集约化种植区为典型研究区域,通过对采集的8个地下水样品及11个土壤样品分析,探讨集约化种植区地下水的污染程度,解析其污染影响机制。结果表明:该集约化种植地区土壤中残留物主要为有机氯农药,多环芳烃及邻苯二甲酸酯类有机化合物。地下水中硝酸盐含量显著增加;重金属中以Cr含量最高,但均未超标;地下水并未受到有机氯农药的污染,但仍显示有多氯联苯的输入;半挥发性有机物检出种类较多,其中残留农膜释放的邻苯二甲酸酯类有机化合物浓度最高;地下水已受到较为严重的污染。集约化种植区大量施用化肥、农药和覆盖农膜,污染负荷严重,灌溉频繁且量大,污染质运移驱动力大是地下水污染的根本原因;当地包气带中黏性土厚度不均以及井孔止水不严等因素也成为了地下水受到污染的直接原因。