Three-dimensional calculations of high- and low-mass planets embedded in protoplanetary discs

We analyse the non-linear, three-dimensional response of a gaseous, viscous protoplanetary disc to the presence of a planet of mass ranging from 1 Earth mass (1 M_⊕) to 1 Jupiter mass (1 M_J) by using the zeus hydrodynamics code. We determine the gas flow pattern, and the accretion and migration rates of the planet. The planet is assumed to be in a fixed circular orbit about the central star. It is also assumed to be able to accrete gas without expansion on the scale of its Roche radius. Only planets with masses   M _p≳ 0.1 M_J  produce significant perturbations in the surface density of the disc. The flow within the Roche lobe of the planet is fully three-dimensional. Gas streams generally enter the Roche lobe close to the disc mid-plane, but produce much weaker shocks than the streams in two-dimensional models. The streams supply material to a circumplanetary disc that rotates in the same sense as the orbit of the planet. Much of the mass supply to the circumplanetary disc comes from non-coplanar flow. The accretion rate peaks with a planet mass of approximately 0.1 M_J and is highly efficient, occurring at the local viscous rate. The migration time-scales for planets of mass less than 0.1 M_J, based on torques from disc material outside the Roche lobes of the planets, are in excellent agreement with the linear theory of type I (non-gap) migration for three-dimensional discs. The transition from type I to type II (gap) migration is smooth, with changes in migration times of about a factor of 2. Starting with a core which can undergo runaway growth, a planet can gain up to a few M_J with little migration. Planets with final masses of the order of 10 M_J would undergo large migration, which makes formation and survival difficult.     

Long-chain alkenones and U37′ variability along a south–north transect in the Western Pacific Ocean

In this paper, we present 50 surface water samples collected during the IMAGES III cruise (June–July 1997) along a transect from New Zealand to the China Sea (42°S–178°E, 21°N–120°E) covering a temperature range from 13.3 to 30.4 °C. A very worthwhile aspect of this study is a coupling of both biomarker (alkenone) and coccolithophorid counting. We show that the U₃₇^k′–temperature relationship is very similar to the Prahl et al. [Geochim. Cosmochim. Acta 52 (1988) 2203] culture calibration and to the global core top calibration of Müller et al. [Geochim. Cosmochim. Acta 62 (1998) 1757]. However, in the warmest surface waters of the Western Pacific ocean (>26.4 °C) where Gephyrocapsa oceanica is likely the most widespread species, the associated U₃₇^k′ has a constant value of 1.0. The consequence is that above this temperature threshold, U₃₇^k′ cannot be used as an accurate paleothermometer.     

Electric Discharges in the Protoplanetary Nebula as a Source of Impulse Magnetic Fields to Promote Dust Aggregation

Lightning discharge generated in the protoplanetary nebula is viewed as a temporally isolated surge in the flow of electrically charged particles, similar to that of terrestrial lightning. If the current is intense enough, a powerful circular impulse magnetic field is generated around the instantaneous virtual electric conductor. Such magnetic field is capable of magnetizing dust grains containing ferromagnetic components present in its vicinity to their saturation levels. As a result, dust grains attract one another, forming the aggregates. This magnetically driven attraction suggests an important process possibly operational at an early stage of the planetary accretion. Based on both a classical model for electric conductor, and the theory of Lienard–Wiechert electromagnetic potentials, our calculations show that the magnetic impulse due to a discharge channel of a few cm in diameter transferring a charge of about 10⁴ electrons reaches as high as 10 T. At these magnetic fields, the ferromagnetic dust grains, and possibly the already-formed larger aggregates as well, are easily magnetized to the saturation levels, producing compact clusters exhibiting permanent magnetic moments.     

The planets capture model of V838 Monocerotis: conclusions for the penetration depth of the planet(s)

V838 Mon is the prototype of a new class of objects. Understanding the nature of its multistage outburst and similar systems is challenging. So far, several scenarios have been invoked to explain this group of stars. In this work, the planets-swallowing model for V838 Mon is further investigated, taking into account the findings that the progenitor is most likely a massive B-type star. We find that the super-Eddington luminosity during the eruption can explain the fast rising times of the three peaks in the optical light curve. We used two different methods to estimate the location where the planets were consumed. There is a nice agreement between the values obtained from the luminosities of the peaks and from their rising time-scale. We estimate that the planets were stopped at a typical distance of one solar radius from the centre of the host giant star. The planets-devouring model seems to give a satisfying explanation to the differences in the luminosities and rising times of the three peaks in the optical light curve of V838 Mon. The peaks may be explained by the consumption of three planets or alternatively by three steps in the terminal falling process of a single planet. We argue that only the binary merger and the planets-swallowing models are consistent with the observations of the new type of stars defined by V838 Mon.     

FUZZY COMPREHENSIVE EVALUATION OF CONTAINER TRANSPORTATION MODES ALONG THE CHANGJIANG RIVER MAIN LINE AND ITS DELTA AREA

The Changjiang River (Yangtze) is one of the fastest growth areas of container transportation in Chi-na. Rail, road and water transportation have competed against each other for container transportation in the Chang-jiang River main line and its delta area. It is of significance to assess these different transportation modes scientifi-cally in order to organize container transportation efficiently in this area and make decision for integral plan and construction of transportation system in this area. This paper outlines application of fuzzy comprehensive evaluation to appraise different modes of typical direction of containers. Twelve assessment indexes were decided. Membership functions were formulated. Evaluation results indicated that road transportation was optimal mode in the Changjiang River delta area, however water transportation was the primary way in the Changjiang River main line.     

Effects of Different Diets on the Dietary Attractability and Selectivity of Chinese Shrimp, Fenneropenaeus chinensis

Attractabilities of different diets and dietary selectivity of Chinese shrimp, Fenneropenaeus chinensis were studied through behavior observation and feeding experiment, respectively. The five diets used in the experiment are: Fish Flesh (FF), Shrimp Flesh (SF), Clam Foot (CF), Polychaete Worm (PW), and Formulated Diet (FD). No significant differences of attractability exist between any two different diets when every two natural diets or all five diets are provided simultaneously. On the other hand, significant differences of attractability exist between FD and every single natural diet when they are provided simultaneously. Results of behavioral observation indicate that natural diets are more attractive than FD. In feeding experiment, Chinese shrimp has distinct selectivity on different diets. It positively selects CF and PW, negatively selects FF and SF, and excludes FD absolutely. The results of the present studies indicate that the dietary selectivity of shrimp was based not only on the attractabilities of the diets, but also on the responses such as growth and food conversion.     

Gouging abrasion test for rock abrasiveness testing

Wear parts of many mineral processing and mining equipment are often subjected to high stress loads applied at high speeds and at varying angles of incidence, where the prevalent mode of wear is high-stress gouging/sliding impact abrasion. Examples include crusher liners, wear liners in hoppers and chutes, picks on roadheaders, discs on tunnel boring machines and ground engaging tools. Abrasion under these conditions is characterised by a high material removal rate and thus has a direct bearing on wear rates and service life of the equipment concerned. However, at present there appears to be no method for rock abrasiveness assessment under these conditions. This paper describes a new Gouging Abrasion method and apparatus for testing abrasivity of rocks under high-stress gouging/sliding impact wear. A Gouging Abrasion Index (Gi) is introduced, which can be used for prediction and assessment of component life expectancy and efficiency of mineral processing and materials handling equipment. Experimental data from Gouging Abrasion testing of numerous Australian rock types are presented. It is suggested that the results of Gi testing can be used for wear rate predictions for a variety of mineral processing and materials handling equipment working under high-stress gouging/sliding impact abrasion conditions.     

Distribution of Cd,Pb, Zn and Cu and their chemical speciations in soils from a peri-smelter area in northeast China

An exploratory study on soil contamination of heavy metals was carried out surrounding Huludao zinc smelter in Liaoning province, China. The distribution of total heavy metals and their chemical speciations were investigated. The correlations between heavy metal speciations and soil pH values in corresponding sites were also analyzed. In general, Cd, Zn, Pb, Cu and As presented a significant contamination in the area near the smelter, comparied with Environmental Quality Standards for Soils in China. The geoaccumulation index showed the degree of contamination: Cd > Zn > Pb > Cu > As. There was no obvious pollution of Cr and Ni in the studied area. The speciation analysis showed that the dominant fraction of Cd and Zn was the acid soluble fraction, and the second was the residual fraction. Pb was mostly associated with the residual fraction, which constituted more than 50% of total concentration in all samples. Cu in residual fraction accounted for a high percentage (40–80%) of total concentration, and the proportion of Cu in the oxidizable fraction is higher than that of other metals. The distribution pattern of Pb and Zn was obviously affected by soil pH. It seemed that Pb and Zn content in acid solution fraction increased with increasing soil pH values, while Cd content in acid soluble fraction accounted for more proportion in neutral and alkaline groups than acidic one. The fraction distribution patterns of Cu in three pH groups were very similar and independent of soil pH values. And the residual fraction of Cu took a predominant part (50%) of the total content.