南海北部深水盆地沉积-构造的差异性及其油气意义

南海北部深水区自西向东依次分布着琼东南盆地、珠江口盆地、台西南盆地等新生代被动陆缘盆地,这些盆地经历了大致相当的从裂陷到坳陷的构造演化史,但在张裂活动过程中存在着明显的沉积-构造的差异性。构造沉降特征分析显示:在同一构造带上自西向东有盆地主要构造沉降发生的时段逐步变晚的趋势;在不同构造带上自北向南有盆地主要构造沉降发生的时段逐步变晚的趋势。这种沉积-构造的差异性对烃源岩的发育类型、分布及生储盖组合等方面有明显的控制作用,表现为:裂谷期构造沉降幅度大的盆地,陆相烃源岩发育,以陆生陆储陆盖型成藏组合为主;裂后期构造沉降幅度大的盆地,海相烃源岩发育规模较大,海生海储海盖型成藏组合及混生海储海盖型生储盖组合所占分量逐渐增多。推测渐新统湖相-湖沼相及海陆过渡相源岩和中新统海相烃源岩应是南海北部深水区油气的主要来源,陆生海储海盖型、海生海储海盖型及混生海储海盖型生储盖组合应是深水区基本生储盖组合类型。     

GPS精密单点定位的数据处理方法综述

在GPS精密单点定位数据处理中,通常采用基于非差观测值的处理方法。然而精密单点定位也可通过观测值不同差分组合以减少某些未知参数,且在理论上与非差模型等价。文中介绍基于非差和差分模型的精密单点定位的几种数据处理方法,并对各种模型进行比较。     

浅谈煤田地震勘探中影响纵向分辨率的主要因素

针对野外数据采集参数对分辨率的影响,对资料处理过程中静校正、反褶积、速度分析、Q补偿及谱白化等几个重要模块原理进行分析,指出在高速岩层中数据采集,应采用小药量激发,小道距,小排列,全三维,不组合、单点数字检波器接收。高密度多点采集,能够充分保护有效地质信息的高频成份,在更大范围内满足高分辨地震勘探的要求。资料处理过程中,在保证同相叠加和高信噪比的前提下,采用提高分辨率的模块以弥补地震波在传播过程中损失的高频成份。实践证明通过高保真、宽频带数据采集和高信噪比前提下的高分辨率数据处理,完全能够为矿井采掘提供高精度地震勘探资料。     

新鲜煤和氧化煤自燃倾向性的FTIR对比分析

利用傅立叶变换红外光谱（FTIR）分析技术,对乌达矿区低温氧化和新鲜煤样进行了红外光谱测试,通过两类煤样的特征官能团吸光度的对比分析．揭示了煤在氧化前后特征官能团的变化规律：氧化后的煤样中脂肪族和芳烃CH减少,酸酐C=O从无到有,芳烃骨架C=C基本不变,进而研究了其对煤自燃倾向性的影响。结果表明脂肪族和羟基含量越高,煤自燃倾向性越大。     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

Traction image method for irregular free surface boundaries in finite difference seismic wave simulation

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.     

A traveltime reciprocity discrepancy in the Podvin & Lecomte time3d finite difference algorithm

We have found that the extensively used finite difference scheme time3d produces time fields which are 'asymmetric' in the sense that traveltimes computed to the right of the source are faster than traveltimes computed to the left. All finite difference schemes will, as they are approximations to the wave equation, to some extent fail to obey reciprocity perfectly. We show, however, that the errors in time3d may be significant—and unnecessarily large. An asymmetry in the point source initialization has been identified, and after correction time3d produces time fields with an improved reciprocity.