Effect of non‐moment braced frame seismic deformations on buckling‐restrained brace end connection behavior: Theoretical analysis and subassemblage tests

In‐plane buckling‐restrained brace (BRB) end rotation induced by frame action is a commonly observed phenomenon in buckling‐restrained braced frames (BRBFs). However, its effect on BRB end connection behavior has not yet been clear. In this study, four BRB end deformation modes for quick determination of end rotational demand are proposed for non‐moment BRBF considering different BRB arrangements, installing story of BRBs, and boundary condition of corner gussets connected with column base. Key factors affecting BRB end rotation and flexural moments are examined theoretically by parametric analysis. Subassemblage tests of seven BRB specimens under horizontal cyclic loading were conducted by adopting two loading frames to impose the expected BRB end deformations. It shows that BRB end rotation subjected BRB ends to significant flexural moments, leading to premature yielding of BRB ends or even tendency of end zone buckling. The deformation modes, the flexural rigidity of BRB ends, and the initial geometric imperfections of BRBs were found to have significant influence on BRB end connection behavior. The triggering moment induced by BRB end rotation was the main contributor to end flexural moment. However, the moment amplification effect induced by flexure of BRB end zones became prominent especially for small flexural rigidity of BRB ends. Implications and future research needs for design of BRB end connections are provided finally based on the theoretical and experimental results. Copyright © 2015 John Wiley & Sons, Ltd.     

矿石中金的在线固相萃取及缝管火焰原子吸收测定

介绍了将流动注射在线因相萃取预浓集与石英缝管火焰原子吸收相结合测定矿石中金的方法，用ＸＡＤ－８吸附树脂填充的微型柱（１００μｌ）在６ｍｌ／ｍｉｎ的流速下，从０．５ｍｏｌ／ＬＨＣｌ介质的试样溶液中浓集金氯络合物，再用乙醇洗脱，最后由火焰原子吸收检测，在采样频率为１０３样／ｈ的流速下灵敏度提高４７倍，分析精度为１．３％，检出限为１．０μｇ／Ｌ；在６５样／ｈ的采样频率下灵敏度提高９５倍，检出限可达０．７     

Dynamic stochastic estimation of physical variables

A fundamental problem facing the physical sciences today is analysis of natural variations and mapping of spatiotemporal processes. Detailed maps describing the space/time distribution of groundwater contaminants, atmospheric pollutant deposition processes, rainfall intensity variables, external intermittency functions, etc. are tools whose importance in practical applications cannot be overestimated. Such maps are valuable inputs for numerous applications including, for example, solute transport, storm modeling, turbulent-nonturbulent flow characterization, weather prediction, and human exposure to hazardous substances. The approach considered here uses the spatiotemporal random field theory to study natural space/time variations and derive dynamic stochastic estimates of physical variables. The random field model is constructed in a space/time continuum that explicitly involves both spatial and temporal aspects and provides a rigorous representation of spatiotemporal variabilities and uncertainties. This has considerable advantages as regards analytical investigations of natural processes. The model is used to study natural space/time variations of springwater calcium ion data from the Dyle River catchment area, Belgium. This dataset is characterized by a spatially nonhomogeneous and temporally nonstationary variability that is quantified by random field parameters, such as orders of space/time continuity and random field increments. A rich class of covariance models is determined from the properties of the random field increments. The analysis leads to maps of continuity orders and covariances reflecting space/time calcium ion correlations and trends. Calcium ion estimates and the associated statistical errors are calculated at unmeasured locations/instants over the Dyle region using a space/time kriging algorithm. In practice, the interpretation of the results of the dynamic stochastic analysis should take into consideration the scale effects.     

Analytical and experimental investigations on seismic performance of exterior beam–column subassemblages of existing RC‐framed building

Seismic performance of exterior beam–column subassemblages of reinforced concrete structure designed and detailed on the basis of the provisions of Eurocode and Indian Standards at different stages of their evolution is evaluated. Performance of the subassemblages designed and detailed according to the three different stages of codal evolution (gravity load design, ‘Nonductile’, and ‘Ductile’) is evaluated through analytical formulations and experimental investigations. In the ‘NonDuctile’ specimens, it has been observed that the shear distortion and degradation in stiffness and strength are significantly high. Performance of the ‘Ductile’ specimens based on Eurocode and Indian Standards is almost similar in terms of strength and stiffness degradation. Nevertheless, the specimen designed on the basis of Indian Standard shows higher energy dissipation at a given drift ratio. In the analytical study, shear and flexural failure of members of subassemblage and shear failure of the joint are considered as possible modes of failure of the beam–column subassemblage. For evaluating the shear strength of the joint region, a soften strut‐and‐tie model is used. Analytically obtained strengths based on the failure criteria of different components of the specimens have been first validated with experimental results and then used to determine the strength of the specimens. The investigation could indicate even the mode of failure at local level. It is utmost important to mention here that even the ductile specimens dissipate most of the energy through the development of damage in the joint region, which is neither desirable nor safe for the stability of whole structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Meso‐scale particle modeling of concrete deterioration caused by alkali‐aggregate reaction

A meso‐scale particle model is presented to simulate the expansion of concrete subjected to alkali‐aggregate reaction (AAR) and to analyze the AAR‐induced degradation of the mechanical properties. It is the first attempt to evaluate the deterioration mechanism due to AAR using the discrete‐element method. A three‐phase meso‐scale model for concrete composed of aggregates, mortar and the interface is established with the combination of a pre‐processing approach and the particle flow code, PFC2D. A homogeneous aggregate expansion approach is applied to model the AAR expansion. Uniaxial compression tests are conducted for the AAR‐affected concrete to examine the effects on the mechanical properties. Two specimens with different aggregate sizes are analyzed to consider the effects of aggregate size on AAR. The results show that the meso‐scale particle model is valid to predict the expansion and the internal micro‐cracking patterns caused by AAR. The two different specimens exhibit similar behavior. The Young's modulus and compressive strength are significantly reduced with the increase of AAR expansion. The shape of the stress–strain curves obtained from the compression tests clearly reflects the influence of internal micro‐cracks: an increased nonlinearity before the peak loading and a more gradual softening for more severely affected specimens. Similar macroscopic failure patterns of the specimens under compression are observed in terms of diagonal macroscopic cracks splitting the specimen into several triangular pieces, whereas localized micro‐cracks forming in slightly affected specimens are different from branching and diffusing cracks in severely affected ones, demonstrating different failure mechanisms. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of sediment pulses on bed relief in bar‐pool channels

To further develop prediction of the range of morphological adjustments associated with sediment pulses in bar‐pool channels, we analyze channel bed topographic data collected prior to and following the removal of two dams in Oregon: Marmot Dam on the Sandy River and Brownsville Dam on the Calapooia River. We hypothesize that, in gravel‐bed, bar‐pool channels, the response of bed relief to sand and gravel sediment pulses is a function of initial relief and pulse magnitude. Modest increases in sediment supply to initially low‐relief, sediment‐poor cross‐sections will increase bed relief and variance of bed relief via bar deposition. Modest increases in sediment supply to initially high‐relief cross‐sections, characteristic of alternate bar morphology, will result in decreased bed relief and variance of relief via deposition in bar‐adjacent pools. These hypothesized adjustments are measured in terms of bed relief, which we define as the difference in elevation between the pool‐bottom and bar‐top. We evaluate how relief varies with sediment thickness, where both relief and mean sediment thickness at a cross‐section are normalized by the 90th percentile of observed relief values within a reach prior to a sediment pulse. Field measurements generally supported the stated hypotheses, demonstrating how introduction of a sediment pulse to low‐relief reaches can increase mean and variance of relief, while introduction to high‐relief reaches can decrease the mean and variance of bed relief, at least temporarily. In general, at both sites, the degree of impact increased with the thickness of sediment delivered to the cross‐section. Results thus suggest that the analysis is a useful step for understanding the morphological effects of sediment pulses introduced to gravel‐bed, bar‐pool channels. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of Structure‐from‐Motion photogrammetry to river restoration

Structure‐from‐Motion (SfM) photogrammetry is now used widely to study a range of earth surface processes and landforms, and is fast becoming a core tool in fluvial geomorphology. SfM photogrammetry allows extraction of topographic information and orthophotos from aerial imagery. However, one field where it is not yet widely used is that of river restoration. The characterisation of physical habitat conditions pre‐ and post‐restoration is critical for assessing project success, and SfM can be used easily and effectively for this purpose. In this paper we outline a workflow model for the application of SfM photogrammetry to collect topographic data, develop surface models and assess geomorphic change resulting from river restoration actions. We illustrate the application of the model to a river restoration project in the NW of England, to show how SfM techniques have been used to assess whether the project is achieving its geomorphic objectives. We outline the details of each stage of the workflow, which extend from preliminary decision‐making related to the establishment of a ground control network, through fish‐eye lens camera testing and calibration, to final image analysis for the creation of facies maps, the extraction of point clouds, and the development of digital elevation models (DEMs) and channel roughness maps. The workflow enabled us to confidently identify geomorphic changes occurring in the river channel over time, as well as assess spatial variation in erosion and aggradation. Critical to the assessment of change was the high number of ground control points and the application of a minimum level of detection threshold used to assess uncertainties in the topographic models. We suggest that these two things are especially important for river restoration applications. Copyright © 2016 John Wiley & Sons, Ltd.     

The Location of Office Space in the Metropolitan Service Economy of the United States, 1985–1990

As the economic base of most American metropolitan areas relies increasingly on services, office industries have shifted to a more pivotal role in the new metropolitan service economy. Using primary office-space usage data of the time period 1985–1990, the changing spatial patterns of this new metropolitan service economy are investigated. It is found that the primary office activities are predominantly concentrated in a relatively small number of the largest metropolitan areas. However, an emerging spatial dispersion in primary office activities is also exhibited. Such dispersion is extremely strong at the upper end of the urban hierarchy. The Sunbelt-Snowbelt dichotomy fails to reveal any differences in the growth pattern of the new metropolitan service economy. A more diversified growth pattern of primary office activities is observed. Concentrated dispersion is the major spatial characteristic of this new metropolitan service economy.     

沙源供给条件对风沙流结构的影响

 针对风沙运动的气固两相流特点,利用FLUNET 软件,对不同沙源供给条件下各种床面的风沙积蚀平衡进行了数值模拟,给出了风速分布和沙粒体积分数随沙源供给条件和下垫面变化的线图,比较了流动边界条件对流场的影响。计算结果揭示了风沙运动中沙粒的体积浓度分布在风速变化和床面形态变化下的变化规律,为沙漠化的防治和理论研究提供了基础。     

长株潭城市群污染空间识别与污染分布研究

利用Arc-GIS空间分析软件对各类型污染进行空间识别和分布模拟,探究长株潭城市群污染空间分布特征。结果显示：① 该区大气环境污染以扬尘和煤烟型为主,主要污染物为可吸入颗粒物和二氧化硫,重点污染区域在长沙、株洲、湘潭三市主城区,呈点状分布;② 该区水域整体水质基本达标,水体环境污染以氨氮和各类重金属为主,且有明显的季节变化规律;③ 土壤污染覆盖范围较广,以株洲市的石峰区为代表,以镉污染最为严重,主要原因为重化工业排污累积。总之,株洲污染最严重,湘潭和长沙次之。污染空间的形成与长株潭城市群的地形地势及三类污染元素之间的转化有较大关联。