现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

基于性能的地震工程研究的新进展及对结构非线性分析的要求

结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。     

基于性能的框架结构抗震设计研究

对国内外基于性能的抗震设计研究成果进行了较系统的综述与分析,研究表明,基于性能的抗震设计能够对结构在未来可能地震作用下的性能进行有效的控制,使破坏和损失限定在可接受的范围内。在此基础上,本文还初步提出了钢筋混凝土框架结构基于延性的抗震设计建议。     

Application of consequence-based design criteria in regions of moderate seismicity

Current design criteria and principles of earthquake engineering design are reviewed, including safety factors, probabilistic approach, and two-level and multi-level functional design ideas. The modern multi-functional idea is discussed in greater details. When designing a structure, its resistance to and the intensity of the earthquake action are considered. The consequence of failure of the structure is considered only through a rough and empirical factor of importance, ranging usually from 1.0 to 1.5. This paper suggests a method of “consequence-based design,” which considers the consequences of malfunctioning instead of simply an importance factor. The main argument for this method is that damage to a structure located in different types of societies may have very different consequences, which are dependant on its value and usefulness to the society and the seismicity in the region.     

Lateral load pattern in pushover analysis

The seismic capacity curves of three types of buildings including frame, frame-shear wall and shear wall obtained by pushover analysis under different lateral load patterns are compared with those from nonlinear time history analysis. Based on the numerical results obtained a two-phase load pattern; an inverted triangle (first mode) load pattern until the base shear force reachesβ times its maximum value, V_max, followed by a (x/H)^α form, hereβ and α being some coefficients depending on the type of the structures considered, is proposed in the paper, which can provide excellent approximation of the seismic capacity curve for low-to-mid-rise shear type buildings. Furthermore, it is shown both the two-phase load pattern proposed and the invariant uniform pattern can be used for low-to-mid-rise shear-bending type and low-rise bending type of buildings. No suitable load patterns have been found for high-rise buildings.     

基于抗震性态的设防标准研究

以基于性态的抗震设计为出发点,并以我国为例,针对目前国内外抗震设防标准的若干问题和不足,提出了基于性态抗震设计的三环节抗震设防方法．将现有的设防内容改为确定结构的抗震设计类别、确定设计烈度或设计地震动参数、确定建筑的重要性等级３个方面,并分别在每一方面进行具体深入的研究,从而形成了一套完整的基于性态的抗震设防标准确定的原则、方法和框架,可以直接用来编制规范供抗震设计使用．      

Correlation study between ground motion intensity measure parameters and deformation demands for bilinear SDOF systems

The correlation between ground motion intensity measures （IM） and single-degree-of-freedom （SDOF） deformation demands is described in this study. Peak ground acceleration （APG）, peak ground velocity （VPG）, peak ground displacement （DPG）, spectral acceleration at the first-mode period of vibration [As（T1）] and ratio of VPG to APG are used as IM parameters, and the correlation is characterized by correlation coefficients p. The numerical results obtained by nonlinear dynamic analyses have shown good correlation between As（T1） or VPG and deformation demands. Furthermore, the effect of As（T1） and VPG as IM on the dispersion of the mean value of deformation demands is also investigated for SDOF systems with three different periods T=0.3 s, 1.0 s, 3.0 s respectively.     

直接基于位移的结构抗震设计理论研究进展

直接基于位移的抗震设计是实现基于性能抗震设计思想的一条有效途径,其理论主要包括三方面的内容,即直接基于位移的抗震设计方法、位移需求估计方法和目标位移的确定。本文在阅读了大量文献的基础上,对国内外在这三方面的研究进行了介绍,并对今后的研究方向进行了展望。     

基于下一代性能设计理论的全概率抗震性能评估

对建筑物灾变发生时经济损失和人员伤亡情况做出准确预估是未来建筑结构设计初期需要努力的方向。基于下一代性能化设计理论,通过精细化建模和动力时程分析对结构进行易损性分析,并以此得到抗震性能评估所需的各类地震响应参数,建立RC框架结构全概率抗震性能评估方法。以云南大学力行楼为例,通过地震损失预测得到了该栋建筑的经济损失、修复时间和人员伤亡情况。该方法直观清晰地展示了结果,便于业主及非本专业从业者理解。