最大准则优化技术在贴体网格中的应用

贴体网格在地质数值模拟中具有广阔的应用前景,为解决贴体网格生成时边界离散问题,提出了最大长度准则和最大面积准则,把曲线逼近和曲面网格优化问题转化为数学优化问题,为求解该问题,提出了改进的单粒子优化算法.试验表明,最大长度准则和最大面积准则的优化效果好于常规方法;以改进的单粒子优化算法求解该问题时,计算效率是智能单粒子优化算法的30倍左右（节点量为200）,从而实现最大长度准则和最大面积准则在贴体网格生成中的应用.针对最大面积准则优化曲面网格不能控制网格步长的情况,提出了限定步长的网格优化算法,使网格步长合理化,并通过实例验证了该算法的有效性.研究成果提供了生成贴体网格时边界优化准则和求解方法,对今后复杂边界的贴体网格生成具有重要意义.     

Water resources optimization and eco-environmental protection in Qaidam Basin

During the development of Qaidam Basin, which is an arid area in Northwest China, rational water resources utilization and optimization are primal prerequisites, and the main restrictive factors include the following facts: scarcy water resources are non-substitutional and uneven distributed in time and space. Based on the essential principle of sustainable development, this paper adopts Multiple Targets Decision by the Closest Value Model, and succeeds in getting the best plan, which can o…     

三维质点追踪模型及其在胶南海域的应用

在已建立的变边界河口、陆架、海洋模型(ECOM)的基础上添加一个变边界质点追踪模块,研究胶东半岛南海域的物质输运特征,讨论了三维空间中,水质点在潮流作用下的迁移特点.该模型在近海海洋环境管理上具有实用价值.     

Magnetic fabrics and rock magnetism of Proterozoic dike swarm from the southern São Francisco Craton, Minas Gerais State, Brazil

Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10⁻³ (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR_0–30, pAAR_30–60 and pAAR_60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of K_max inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (K_max<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.     

基于剖面三维地质建模方法及在本溪地区应用

针对成矿带三维地质建模面临的实际问题,以GOCAD软件作为三维建模工具,阐述了基于剖面的三维地质建模流程与方法.为了充分揭示本溪地区深部地质情况及隐伏铁矿的发育情况,采用基于剖面的三维地质建模方法构建了本溪地区907km2的三维地质模型,获取了本溪地区地下三维地质结构,显示出该地区盖层发育宽缓褶皱,断裂切割作用强烈,基底最大埋深可达4200 m,在变质基底埋深较浅的地区,具有很大的铁矿资源勘探潜力.实际应用情况表明,基于剖面的三维地质建模方法符合地质研究从二维到三维的工作流程和思维习惯,是一种有效的成矿带三维建模方法.     

Spatial heterogeneity of soil mineral oxide components in depression between karst hills,Southwest China

In karst regions,the spatial heterogeneity of soil mineral oxides and environmental variables is still not clear.We investigated the spatial heterogeneity of SiO2,Al2O3,Fe2O3,CaO,MgO,P2O5,K2O,and MnO contents in the soils of slope land,plantation forest,secondary forest,and primary forest,as well as their relationships with environmental variables in a karst region of Southwest China.Geostatistics,principal component analysis(PCA),and canonical correlation analysis(CCA)were applied to analyze the field data.The results show that SiO2was the predominant mineral in the soils(45.02%–67.33%),followed by Al2O3and Fe2O3.Most soil mineral oxide components had a strong spatial dependence,except for CaO,MgO,and P2O5in the plantation forest,MgO and P2O5in the secondary forest,and CaO in the slope land.Dimensionality reduction in PCA was not appropriate due to the strong spatial heterogeneity in the ecosystems.Soil mineral oxide components,the main factors in all ecosystems,had greater influences on vegetation than those of conventional soil properties.There were close relationships between soil mineral oxide components and vegetation,topography,and conventional soil properties.Mineral oxide components affected species diversity,organic matter and nitrogen levels.     

Earthquake swarms preceding the 2000 eruption of Miyakejima volcano, Japan

The first sign of magma accumulating beneath Miyakejima, an island volcano in the northern Izu islands, Japan, came at around 18:00 on 26 June 2000, when a swarm of earthquakes was detected by a volcano seismic network on the island. Earthquakes occurred initially beneath the southwest flank near the summit and gradually migrated west of the island, where a submarine eruption occurred the next morning. Earthquakes then migrated further to the northwest between Miyakejima and Kozushima, another volcanic island and developed to the most intense earthquake swarm ever observed in and around Japanese archipelago. To better image how the initial magma intrusion occurred, we relocated hypocenters by using a station-correction method and a double-difference method. The relocated epicenters are generally concentrated near the upper bound of dyke intrusions inferred from geodetic studies throughout the initial stages of the 2000 eruption at Miyakejima from 26 to 27 June 2000. As for seismic activity westward off Miyakejima in the morning on 27 June, hypocenters from both a nationwide seismic network that were relocated by the double-difference method, and those from the volcano seismic network relocated by the station-correction method, formed a very shallow cluster that ascended slowly with time as it propagated northwestward from Miyakejima. This suggests that the dykes have both a radial and upward component of movement.Editorial responsibility: S. Nakada, T. Druitt     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

Indoor localization for pedestrians with real-time capability using multi-sensor smartphones

ABSTRACT

The localization of persons or objects usually refers to a position determined in a spatial reference system. Outdoors, this is usually accomplished with Global Navigation Satellite Systems (GNSS). However, the automatic positioning of people in GNSS-free environments, especially inside of buildings (indoors) poses a huge challenge. Indoors, satellite signals are attenuated, shielded or reflected by building components (e.g. walls or ceilings). For selected applications, the automatic indoor positioning is possible based on different technologies (e.g. WiFi, RFID, or UWB). However, a standard solution is still not available. Many indoor positioning systems are only suitable for specific applications or are deployed under certain conditions, e.g. additional infrastructures or sensor technologies. Smartphones, as popular cost-effective multi-sensor systems, is a promising indoor localization platform for the mass-market and is increasingly coming into focus. Today’s devices are equipped with a variety of sensors that can be used for indoor positioning. In this contribution, an approach to smartphone-based pedestrian indoor localization is presented. The novelty of this approach refers to a holistic, real-time pedestrian localization inside of buildings based on multi-sensor smartphones and easy-to-install local positioning systems. For this purpose, the barometric altitude is estimated in order to derive the floor on which the user is located. The 2D position is determined subsequently using the principle of pedestrian dead reckoning based on user's movements extracted from the smartphone sensors. In order to minimize the strong error accumulation in the localization caused by various sensor errors, additional information is integrated into the position estimation. The building model is used to identify permissible (e.g. rooms, passageways) and impermissible (e.g. walls) building areas for the pedestrian. Several technologies contributing to higher precision and robustness are also included. For the fusion of different linear and non-linear data, an advanced algorithm based on the Sequential Monte Carlo method is presented.     

降水效果的数值分析和设计优化研究

降水在各类工程中使用的越来越多,已形成了一套设计和施工方法,但其降水效果分析却少有人研究。针对某露天煤矿开挖中的降水疏干工程,开展了大规模的数值模拟研究。在掌握水文地质条件的基础上,通过Modflow建立了较合理的数值模型,对不同工况的降水效果进行了详细的分析,实际计算表明,加井时间、调整单井抽水量、井的数目、井的排列以及它们的相互作用对降水效果有很大影响。分批次、分时段、优化井排列和调整单井抽水量是提高降水效果的设计措施和优化设计的重要影响因素,这些因素的作用规律将为降水设计和施工以及实际工程效果提供重要理论依据。