位移监测在滑坡时空运动研究中的应用

滑坡时空运动特征是滑坡地质体在内因和外因共同作用下，自一种状态向另一种状态转化的地质过程。滑坡位移监测是研究滑坡变形影响因素、动态规律及预测预报的主要途径，特别是滑坡深部位移监测，又为研究滑坡体的时空运动过程提供了重要信息。本文结合几个滑坡的深部位移监测实践，综合分析位移监测信息，研究滑坡体的时空运动特征及发展趋势，为滑坡时空运动系统研究及稳定性预测提供依据。     

银川市初夏气溶胶粒子谱分布特征

利用美制APS—3310A型激光粒谱仪，在中国西北城市银川对大气气溶胶粒子进行现场观测，结合气象条件，并通过理论计算分析，给出了银川市初夏大气气溶胶的日变化特征、3种不同粒径粒子分布特点及飘尘谱分布特征，以期为银川市大气污染总量控制方案及对策提供科学依据。     

Digital effects in the spatial economy of film: towards a research agenda

A new assemblage of digital technologies, organized around compressed software formats and broadband Internet infrastructures, is reconfiguring the motion picture industry. In this paper, I review the impacts of digitization upon the spatial economy of film in the United States via a commodity chain framework. The discussion raises some important themes for conceptual debate in economic geography.     

现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

医院住院部大楼抗震性能评价

以某医院住院部大楼为例进行结构抗震性能评价，首先分析了场址的地震环境，开展了地震危险性分析工作，合成了不同地震危险水平下的地震动加速度时程。进而，通过对结构的模型简化，应用时程分析方法分析结构的抗震性能，得出了一些对其改造加固有意义的结论。     

最不利地震动在网壳结构抗震设计中的应用

利用文献提供的最不利地震动，对网壳结构等大跨空间结构进行了分析，分别考察了仅水平输入和三向地震波输入的两种情况，对最不利地震动在网壳结构抗震设计中的适用性进行了探讨，并在一实际工程设计中进行了应用。大跨度空间结构在水平地震动输入时，宜按照的最不利地震动进行设计；在三向地震动同时输入时，应同时分别按所推荐最不利设计地震动和按常规选用的地震动，对大跨度空间结构进行抗震分析。     

岫岩-海城5.4级地震前小震震源机制解与记录特征分析

采用Pn、Pg初始波初动符号，利用乌尔夫网上半球投影，用作图方法求解了岫岩－海城震区（1999年1月－1999年11月29日）主震前辽宁数字地震台网记录（ML≥2.5)的41个小震的震源机制参数。结合前震记录的某些特征，对主震前应力方向的时空变化，震源错动性质进行分析和讨论。     

川滇地块的震源力学机制、运动速率和活动方式

用 4 4 2次中强地震的震源机制解分析了川滇次级地块应力场的优势方向。使用 771次 3级左右地震的滑动角λ参数统计确定震源断层的错动方式 ,并用中强地震P波初动解的N轴仰角的统计分布结果得到的震源断层错动或滑动型式去佐证。拟合中强地震的矩张量速率式 ,计算了川滇次级地块各地震构造区的年均滑动速率 ,并进行比较。根据 1980— 2 0 0 1年川青地块、雅江地块和滇中地块边界断裂带跨断层短水准、短基线定期复测结果 ,分析了水平和垂向年均形变速率。川滇地块间的运动是不均匀的。川青地块的运动方向为SEE。雅江地块压应力场优势方向为SSE ,相对川青地块的运动速率更大。滇中地块承袭雅江地块的运动方向 ,略偏东。密支那滇西地块压应力场有 2组优势方向 ,存在向NE方向的推挤和SSE方向的逃逸 ,活动速率大     

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.     

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.