定向钻进技术在陷落柱治理中的应用

为治理龙庞矿陷落柱实水事故，采用螺杆钻进技术在陷落柱南缘设计施工两个定向井Z5-1及Z5—2。以Z5-1定向井为例，使用Ф117．6mm钻头，采用优质化学泥浆，钻压35～40kN，随钻钻进至480m后改为回转钻进，在稳斜钻具钻到516．45m处进行水泥浆堵漏，边堵漏边钻进，并且每钻进10m左右测斜一次，直到中靶。     

Geochemistry of Brines from Salt Ore Deposits in Western Tarim Basin

In the geological evolution of the Tarim Basin, many transgressions and relictions happened. So there have been plentiful sources of salt. Moreover, because of uttermost drought, a lot of salt has been deposited. It is possible to find potash salt in this area. In our fieldwork, we have found salt and brine in western Tarim Basin. Based on a geological survey and the characteristics of sedimentary facies and paleogeography, this paper deals with the geochemical parameters and discusses the possibility of formation of potash salt in terms of the chemical analyses of samples collected from western Tarim Basin. Results of brine analysis lead to some conclusions: most of these salt brines have eluviated from very thick halite beds, mainly chloridetype salt and this kind of halite does not reach the stage of potash deposition in all aspects; WKSL (Wukeshalu) occupies a noticeable place, and we should attach importance to this district because there have been some indicators of the occurrence of potash deposits as viewed from the contents of Br and K. Finally, low Br contents are recognized in the Tarim Basin as a result of salt aggradation, and this point of view has been proved by the results of this experiment and the data available. It cannot depend upon the index of Br to judge the evolution stage of halite. We must look for other facies of potash except marine facies.     

基于强度参数演化行为的岩石峰后应力-应变关系研究

基于岩石材料峰后强度参数的演化行为,结合强度准则,提出了建立峰后应力-应变关系的一般方法。在此基础上,基于摩尔-库仑强度准则,以最大主应变 作为应变软化参数,假设黏聚力 ,内摩擦角 为主应变 的分段线性函数条件下,给出了岩石材料的峰后应力-应变关系式的求法。在数值算例中,利用提出的方法,给出了大理岩在不同围压下的应力-应变曲线,算例显示,利用这一方法求得的峰后应力-应变关系曲线变化趋势与试验数据基本一致,表明该方法在研究峰后应力-应变关系上具有一定的合理性。     

基于真三轴试验的黄土结构性变化规律研究

基于综合结构势理论,通过自主研发的真三轴仪,研究了原状黄土、重塑黄土和饱和黄土的应力-应变关系和土的结构性变化规律,针对反映黄土变形过程结构性演变的应力比结构性参数,揭示了不同含水率黄土结构性参数与广义剪应变关系随固结压力、应力路径的变化规律,建立了数学描述模型,同时验证了真三轴仪和应力比结构性参数的可靠性。结果表明,土的状态不同,其应力-应变关系存在明显差异。原状土更易呈现应变软化或双曲线特性,而重塑土或饱和土更易呈现双曲线或应变硬化特性。随着剪切变形和含水率的增大,土的结构性均逐渐减小,而固结压力? c和中主应力参数b值也会影响土的结构性变化规律。提出的结构性参数的拟合公式与理论和试验结合吻合较好,可推广工程应用。     

新疆库布苏金矿石英标型特征研究

重点研究了库布苏矿化带中石英脉与金矿化关系，对不同成矿阶段石英的化学成分，晶胞参，红外光谱，热发光，包裹体等进行了研究，总结了找矿矿物学标志。     

Structural physical parameter identification based on evolutionary-simplex algorithm and structural dynamic response

Evolutionary computation based on the idea of biologic evolution is one type of global optimization algorithm that uses self-adaptation, self-organization and random searching to solve optimization problems. The evolutionary-simplex algorithm is introduced in this paper. It contains floating encoding which combines the evolutionary computation and the simplex algorithm to ovcrcomc the problems encountered in the genetic algorithm and evolutionary strategy methods.Numerical cxpcrimcnts arc performed using seven typical functions to verify the algorithm. An inverse analysis method to identify structural physical parameters based on incomplete dynamic responses obtained from the analysis in the time domain is prcscntcd by using the evolutionary-simplex algorithm. The modal evolutionary-simplex algorithm converted from the time domain to the modal domain is proposed to improve the inverse efficiency. Numerical calculations for a 50-DOF system show that whcn compared with other methods, the evolutionary-simplex algorithm offers advantages of high precision,cfficient searching ability, strong ability to resist noise, independence of initial value, and good adaptation to incomplete information conditions.     

堆石料Gudehus-Bauer亚塑性本构模型改进及参数确定方法

研究了Gudehus-Bauer亚塑性本构模型和模型参数的求取方法。采用侧限压缩试验曲线求取模型参数颗粒硬度hs和指数n。根据模型方程的推导,建立了拟合指数 和 与围压之间的关系,并提出了新的拟合参数。考虑到堆石料具有明显的剪胀、剪缩性,在Gudehus-Bauer模型线性项中增加了主要控制体积应变项 ,以改善模型对堆石料体积应变曲线的描述。采用堆石料大型侧限压缩试验、常规三轴试验分别验证了新的拟合参数和改进后的Gudehus-Bauer亚塑性本构模型。与堆石料试验成果比较,提出的新拟合参数与改进后的Gudehus-Bauer亚塑性本构模型可以较好地模拟堆石料的应力-应变特性,并较好地改善了堆石料体变曲线的模拟结果。对改进后的模型作了常规三轴加、卸载模拟,模拟结果反映了改进的Gudehus-Bauer亚塑性本构模型具有一定的卸载适应性。     

大直径超长灌注桩水平承载性能的参数敏感性

大直径超长灌注桩是高规格建（构）筑物桩基工程的发展趋势,但有关其水平承载性能的研究还较少。依托江苏靖江文化中心大直径超长灌注桩建设项目,通过现场试桩试验获得了桩身水平受力及承载变形特征。采用孔压静力触探（CPTU）测试p-y曲线法构建了大直径超长灌注桩水平承载数值计算模型,在与现场试桩结果比对验证之后,进一步研究了桩径尺寸效应、桩顶嵌固形式、桩身倾角、竖向载荷对大直径超长灌注桩的影响规律。最后通过计算各影响因素的参数敏感度,实现了对大直径超长灌注桩水平承载性能参数敏感性的客观定量评价。研究结果表明：原位测试CPTU可以很好地应用于大直径超长灌注桩的水平承载分析,大直径超长灌注桩参数敏感度由大到小依次为：桩顶嵌固形式、尺寸效应、竖向荷载、桩身倾角。     

适用于栅格状孕镶金刚石钻头的胎体配方研究

为了提高钻进坚硬岩层的工作效率,将孕镶金刚石钻头胎体结构设计为栅格状,分析了栅格状孕镶金刚石钻头钻进岩层时的碎岩方式,并采用粉末冶金法制备Inconel 718和CoCrMo试样,通过分析不同烧结温度对两种胎体试样的硬度、耐磨性及抗弯强度的影响,确定了两种材料的最优烧结参数,并对其在该烧结温度下的力学性能进行对比分析。研究结果表明：Inconel 718和CoCrMo均具有较好的抗弯强度,满足钻进坚硬岩层对胎体抗弯强度的要求。Inconel 718的硬度比传统WC基胎体材料小,试样磨损量较大,适合用于地质灾害应急勘查等要求钻进速度快的极端情况;CoCrMo的硬度及耐磨性与传统WC基胎体接近,适合作为孕镶金刚石钻头的胎体材料。     

区域地球化学评价中变异系数校正参数的意义

通过对我国新疆西天山各地球化学区数据的归纳和研究,计算西天山12种常见成矿元素在各地球化学区的富集系数,提出校正系数公式,并将变异系数进行合理的校正与排序。与实际矿床和矿点结合,验证校正系数的正确性和适用性,预测元素成矿有利顺序和规律,总结出西天山富集系数与变异系数在成矿中的制约关系。该方法实现了不同成矿元素之间成矿条件的对比,拓宽了地球化学参数的适用性,提高了在勘探程度较低的地区地球化学评价方法的准确性,为地球化学评价提供科学依据。