Verification of significant wave representation method

The significant wave representation method is the simplest method for computing the transformation of significant wave height across-shore. However, many engineers are reluctant to use this method because many researchers have pointed out that the method possibly contains a large estimation error. Nevertheless, Rattanapitikon et al. [Rattanapitikon, W., Karunchintadit, R., Shibayama, T., 2003. Irregular wave height transformation using representative wave approach. Coastal Engineering Journal, JSCE 45(3), 489–510.] showed that the wave representation method could be used to compute the transformation of root mean square wave heights. It may also be possible to use it for computing the significant wave height transformation. Therefore, this study was carried out to examine the possibility of simulating significant wave height transformation across-shore by using the significant wave representation method. Laboratory data from small- and large-scale wave flumes were used to calibrate and examine the models. Six regular wave models were applied directly to irregular waves by using the significant wave height and spectral peak period. The examination showed that three regular wave models (with new coefficients) could be used to compute the significant wave height transformation with very good accuracy. On the strength of both accuracy and simplicity of the three models, a suitable model is recommended for computing the significant wave height transformation. The suitable model was also modified for better predictions. The modified model (with different coefficients) can be used to compute either regular wave height or significant wave height transformation across-shore.     

Solution of the propagation of the waves in open channels by the transfer matrix method

Many problems in mechanics can be solved by the use of the transfer matrix method. The use of this method in hydraulics engineering is not widespread and only limited studies are available. In this study, linearized St. Venant equations were used and the use of transfer matrix in ocean engineering was investigated for long waves in open channels, and numerical application was carried out. The results obtained through the transfer matrix method, which is quite easy to use, program and comprehend, showed similar results obtained from the characteristics method and finite differences method.     

极限波浪运动特性的非线性数值模拟

利用时域高阶边界元方法建立了模拟极限波浪运动的完全非线性数值模型,其中自由水面满足完全非线性自由水面条件.采用半混合欧拉-拉格朗日方法追踪流体瞬时水面,运用四阶Runge-Kutta方法更新下一时间步的波面和速度势,同时应用镜像格林函数消除水槽两个侧面和底面上的积分.研究中利用波浪聚焦的方法产生极限波浪,并且在水槽中开展了物理模型实验,将测点试验数据与数值结果进行了对比,两者吻合得很好.对极限波浪运动的非线性和流域内速度分布进行了研究.     

Microbial photosynthesis in coral reef sediments (Heron Reef, Australia)

We investigated microphytobenthic photosynthesis at four stations in the coral reef sediments at Heron Reef, Australia. The microphytobenthos was dominated by diatoms, dinoflagellates and cyanobacteria, as indicated by biomarker pigment analysis. Conspicuous algae firmly attached to the sand grains (ca. 100 μm in diameter, surrounded by a hard transparent wall) were rich in peridinin, a marker pigment for dinoflagellates, but also showed a high diversity based on cyanobacterial 16S rDNA gene sequence analysis. Specimens of these algae that were buried below the photic zone exhibited an unexpected stimulation of respiration by light, resulting in an increase of local oxygen concentrations upon darkening. Net photosynthesis of the sediments varied between 1.9 and 8.5 mmol O₂ m⁻² h⁻¹ and was strongly correlated with Chl a content, which lay between 31 and 84 mg m⁻². An estimate based on our spatially limited dataset indicates that the microphytobenthic production for the entire reef is in the order of magnitude of the production estimated for corals. Photosynthesis stimulated calcification at all investigated sites (0.2–1.0 mmol Ca²⁺ m⁻² h⁻¹). The sediments of at least three stations were net calcifying. Sedimentary N₂-fixation rates (measured by acetylene reduction assays at two sites) ranged between 0.9 to 3.9 mmol N₂ m⁻² h⁻¹ and were highest in the light, indicating the importance of heterocystous cyanobacteria. In coral fingers no N₂-fixation was measurable, which stresses the importance of the sediment compartment for reef nitrogen cycling.     

Simulation of nonlinear wave run-up with a high-order Boussinesq model

This paper considers the numerical simulation of nonlinear wave run-up within a highly accurate Boussinesq-type model. Moving wet–dry boundary algorithms based on so-called extrapolating boundary techniques are utilized, and a new variant of this approach is proposed in two horizontal dimensions. As validation, computed results involving the nonlinear run-up of periodic as well as transient waves on a sloping beach are considered in a single horizontal dimension, demonstrating excellent agreement with analytical solutions for both the free surface and horizontal velocity. In two horizontal dimensions cases involving long wave resonance in a parabolic basin, solitary wave evolution in a triangular channel, and solitary wave run-up on a circular conical island are considered. In each case the computed results compare well against available analytical solutions or experimental measurements. The ability to accurately simulate a moving wet–dry boundary is of considerable practical importance within coastal engineering, and the extension described in this work significantly improves the nearshore versatility of the present high-order Boussinesq approach.     

黄河水下三角洲海底管道沉降量确定方法研究

提出一种海底管道沉降计算方法——递推法,应用到胜利油田埕岛海域海底管道沉降计算中,并将计算结果与目前常用的日本规范法和极限法进行比较。研究发现在粉土与粉质粘土为主的强度较高的海床上,递推法与日本规范法计算结果比较接近,极限法的最小;在淤泥质土组成的强度较低的海床上,日本规范法的计算值最大,递推法的居中,极限法的最小。逆推法可计算裸置和埋设两种形式的管道沉降量,而另外两者只能计算裸置管道的沉降。文中进一步讨论了引起管道沉降的影响因素,土体强度和压缩性对管道沉降影响较大。且管道埋深越大,沉降也越大。最后分析了黄河水下三角洲埕岛海域4个区的管道沉降量,Ⅰ区争Ⅱ区管道沉降较小,可以忽略,Ⅳ区沉降较大,在淤泥质软土上的管道,可能会完全陷入土中。     

基坑及周边建筑物变形监测方案

结合某基坑变形监测项目,从观测墩及觇牌的设计、观测方法、精度估计等方面对基坑水平位移观测进行了介绍,并介绍了利用差异沉降量推算法进行倾斜观测的方法.     

GPS精密星历的轨道内插方法比较

在高精度的GPS测量数据处理过程中,获取高精度卫星轨道是重要的环节,内插是获取任意历元的精密轨道信息的重要手段,对拉格朗日插值法、牛顿插值法、Neville逐次线性内插法和切比雪夫插值法的效果做了细致的比较,并在此基础上进一步探讨了短时间外推的效果。     

Detection of nighttime sea fog/stratus over the Huanghai Sea using MTSAT-1R IR data

A dual channel difference (DCD) method is applied to detect nighttime sea fog/stratus over the Huanghai Sea using the infrared (IR) data of shortwave (3.5–4.0 μm) and longwave (10.3–11.3 μm) channels from the Multi-functional Transport Satellite (MTSAT)-1R, i.e., shortwave minus longwave brightness temperature difference (SLTD). Twenty-four sea fog events over the Huanghai Sea during March to July of 2006 and 2007 are chosen to determine a suitable value of SLTD for nighttime sea fog/stratus detection, and ...     

Winkler's method overestimates dissolved oxygen in seawater: Iodate interference and its oceanographic implications

Dissolved oxygen in seawater has been determined by using the Winkler's reaction scheme for decades. An interference in this reaction scheme that has been heretofore overlooked is the presence of naturally occurring iodate in seawater. Each mole of iodate can result in an apparent presence of 1.5 mol of dissolved oxygen. At the concentrations of iodate in the surface and deep open ocean, it can lead to an overestimation of 0.52 ± 0.15 and 0.63 ± 0.05 μmol kg^− 1 of oxygen in these waters respectively. In coastal and inshore waters, the effect is less predictable as the concentration of iodate is more variable. The solubility of oxygen in seawater was likely overestimated in data sources that were based on the Winkler's reaction scheme for the determination of oxygen. The solubility equation of García and Gordon [Garcia H.E., Gordon, L.I., 1992. Oxygen solubility in seawater: Better fitting equations. Limnol. Oceanogr. 37, 1307–1312] derived from the results of Benson and Krause [Benson, F.B., Krause, D. Jr., 1984. The concentration and isotopic fractionation of oxygen dissolved in freshwater and seawater in equilibrium with the atmosphere. Limnol. Oceanogr. 29, 620–632] is free from this source of error and is recommended for general use. By neglecting the presence of iodate, the average global super-saturation of oxygen in the surface oceans and the corresponding efflux of oxygen to the atmosphere both have been overestimated by about 8%. Regionally, in areas where the degree of super-saturation or under-saturation of oxygen in the surface water is small, such as in the tropical oceans, the net air–sea exchange flux can be grossly under- or overestimated. Even the estimated direction of the exchange can be reversed. Furthermore, the presence of iodate can lead to an overestimation of the saturation anomaly of oxygen in the upper ocean attributed to biological production by 0.23 ± 0.07%. AOU may have been underestimated by 0.52 ± 0.15 and 0.63 ± 0.05 μmol kg^− 1 in the surface mixed layer and deep water, while preformed phosphate and preformed nitrate may have been overestimated by 0.004 ± 0.001 and 0.06 ± 0.02 μmol kg^− 1 in the surface mixed layer, and 0.005 ± 0.0004 and 0.073 ± 0.006 μmol kg^− 1 in the deep water. These are small but not negligible corrections, especially in areas where the values of these parameters are small. At the increasing level of sophistication in the interpretation of oxygen data, this source of error should now be taken into account. Nevertheless, in order to avoid confusion, an internationally accepted standard needs to be adopted before these corrections can be applied.