Application of X-ray computed tomography for analyzing cleat spacing and cleat aperture in coal samples

New techniques to determine distributions of cleat aperture, cleat orientation and cleat spacing from CT scans have been developed. For cleat orientation and spacing distributions, two different coal blocks were scanned. The CT scans have been analyzed for the three orthogonal directions. Histograms of the cleat orientations are bimodal, expressing the typical cleat texture of face and butt cleats and bedding perpendicular relaxation fractures. Deviations up to 20° from the peak values in the cleat orientation distributions were used as input for automated image analysis of cleat spacing. Distributions of the cleat spacing measurements are related to the face and butt cleat directions. The term “relevant cleat length” is introduced as a measure to extract the amount of cleat length involved with the cleat spacing measurements. The ratio ranges from 0.03 to 0.38 and expresses the difference in cleat texture in both samples. Cleat spacing versus relevant cleat length shows sample specific patterns for face cleat, butt cleat and bedding. To describe cleat aperture quantitatively, peak height and missing attenuation have been used. The image of a cleat was seen as a convolution of a rectangular fracture profile with a Gaussian point spread function.     

用旅游图制作导航电子地图中的地图纠正

介绍了一种用三次插值样条对公开出版的旅游图进行纠正,制作汽车导航电子地图的方法,分析了其中存在的问题,提出了解决的办法。     

Geolord-AT空三加密软件处理数码航片的方法

在Geolord-AT空三加密软件中对数码航片进行框标定向的前期处理，创建带有框标的数码航片或者直接创建内定向的＊．kb文件，使数码航片顺利按要求通过内定向。     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.     

Estimating the orientation error of the Dahan Downhole Accelerometer using the maximum cross-correlation coefficient between the observed and synthetic waves

A new algorithm to correct the orientation error of the accelerometerat the Dahan Downhole Array, Hualien, Taiwan is developed. This algorithmconsists of three stages: (1) rotating two horizontal ground motions on thefree surface to the SH-SVdirection and SH axis offers a reference direction.(2) computing the synthetic downhole SH waves at a downhole station and (3)searching a rotation angle for downhole observation that yields a best waveformmatch between the synthetic and observed downhole seismograms. At this point, the rotated angle corresponding to the best waveform match can be considered as the orientation error. We selected five earthquakes with good data qualityfor analysis. Results show that this algorithm gives a more stable estimationthan a conventional method because it allows the selection of data from a wider time window for analyses. The estimated orientation error of the accelerometers at the Dahan Downhole Array after the 1999 reinstallation are40°, 114° and 285° at depths of 50, 100 and 200 m, respectively.     

框标与影像叠置时的自适应内定向算法

虽然自动内定向在过去的几年是研究的热点问题，但是针对P31这类近景相机的影像进行自动内定向还存在一些问题，主要原因在于P31影像的框标叠置在景物上。认为自动内定向可以看做一个全局影像匹配问题，分两步进行。首先，用模板匹配和Hough变换在影像上提取可能的框标点，然后用软对应和确定性退火结合仿射变换得到惟一的框标位置。试验和结果分析说明，利用本文方法，可以惟一确定框标，并发现严重的粗差。同时提出自动确定最小的框标搜索区域的方法。     

JX—3解析测图仪上航测高倍放大成图的试验

介绍试用１：３３０００比例尺航测资料，在ＪＸ－３解析测图仪上高倍放大航测１：１０００比例尺地形图的成图方案和应采取的技术措施，运用 解析法模型绝对定向的原理，在全野布点时采用两种方案对照比较，进行理论和试验精度的分析，并给出试验结果。     

张家界地貌风光及其产业导向

用遥感技术对张家界地貌进行了研究,分析了张家界地貌的产业导向和开发效益,提出了进一步发展的举措。