Calibrating the GOCE accelerations with star sensor data and a global gravity field model

A reliable and accurate gradiometer calibration is essential for the scientific return of the gravity field and steady-state ocean circulation explorer (GOCE) mission. This paper describes a new method for external calibration of the GOCE gradiometer accelerations. A global gravity field model in combination with star sensor quaternions is used to compute reference differential accelerations, which may be used to estimate various combinations of gradiometer scale factors, internal gradiometer misalignments and misalignments between star sensor and gradiometer. In many aspects, the new method is complementary to the GOCE in-flight calibration. In contrast to the in-flight calibration, which requires a satellite-shaking phase, the new method uses data from the nominal measurement phases. The results of a simulation study show that gradiometer scale factors can be estimated on a weekly basis with accuracies better than 2 × 10⁻³ for the ultrasensitive and 10⁻² for the less sensitive axes, which is compatible with the requirements of the gravity gradient error. Based on a 58-day data set, scale factors are found that can reduce the errors of the in-flight-calibrated measurements. The elements of the complete inverse calibration matrix, representing both the internal gradiometer misalignments and scale factors, can be estimated with accuracies in general better than 10⁻³.     

三维旋转扫描测量平台设计与实现

本设计主要用于360°旋转的三维扫描,实现角度数据的实时获取。设计中采用单片机控制交流伺服电机进行自定的角度、速度与方向的旋转并实时上传时间、角度数据至上位机进行处理,实现了对平台旋转精度的控制与检测,着重研究了该传感器误差源的产生,对实际应用中的误差进行了定量分析,利用偏心改正、4分频等方法减少了误差,提高了参数精度。角度范围为360°,角度分辨率为0.01°。     

The effect of bedform dynamics on computing suspended sediment fluxes using optical backscatter sensors and current meters

The sensitivity of the suspended sediment flux is tested with respect to rapid changes in bed-level across the surf zone of a sandy beach. The suspended flux was computed using a fixed instrument array, but bed-level changes due to ripple migration caused the instrument elevations to be significantly changed during the course of the experiment. The nominal elevations of the instruments were adjusted during data processing (using the MOBS array) to maintain a fixed elevation with respect to bed-level changes. The resultant suspended sediment concentrations and fluxes were significantly different from the unadjusted data, and for the present data set O(35%) less when averaged over the tide. The maximum difference between adjusted and unadjusted fluxes may be O(260%). The results indicate that changes in bed-level, particularly those due to bedform migration, must be accounted for when processing OBS data if reliable estimates of suspended sediment transport are to be obtained in the field.     

The black water around the Changjiang (Yangtze) Estuary in the spring of 2003

The Changjiang (Yangtze) Estuary is located in the East China Sea shelf with shallow water. Affected by the tide mixing and the runoff of the Changjiang River and the Qiantang River, the turbidity is very high. Generally, the water-leaving radiance is high in the turbid water because of the large particle scattering. Based on the in-situ data and ocean color remote sensing data of SeaWiFS, it was found that there was a black water region with the normalized water-leaving radiances less than 0.5 mW/(cm2·μm2·...     

水下光学无线通信的海水信道特性研究

提出了将具有比声学高达几倍的数据通信速率,良好的安全性和隐蔽性的光学无线通信技术应用于海军、海洋科学研究和水下工程等领域,实现高速率的水下无线通信技术实现海量数据的信息交换.基于生物光学特性的水下光学信道模型,建立了水下光学通信系统性能分析方法.并对基于发光二极管(LED)的水下光学无线通信系统进行了仿真,其结果表明所建立的方法可以进行各种海域水质环境的模拟,便于时水下光学无线通信系统性能进行预测评估,为水下光学无线通信系统的设计方案的评估提供了依据.     

海洋环境无线传感器网络监测体系与应用技术研究

针对目前海洋环境监测中急需解决的主要技术问题.对海洋环境无线传感器网络监测的体系结构进行了研究,通过对Crossbow无线传感器网络的拓扑结构和软件架构进行分析与试验.提出其技术优势和有待解决的应 用问题.     

光纤应变仪的研制与应用前景

光纤应变仪是利用特种光纤光栅器件或者光纤干涉技术进行高精度应变传感的仪器.常见特种光纤光栅有相移光栅和光纤光栅谐振腔,线宽均较窄,可达到0.01 pm量级甚至更窄,结合高精度解调方法,可显著提高系统的应变测量精度.     

压力传感器的自动标定技术

针对压力测量设备生产和维护过程中,对关键部件压力传感器标定处于手工操作状态、效率低、操作人员不易掌控、标定结果处置复杂的现状,开发了针对压力传感器的自动标定技术。该技术将计算机控制、智能化、曲线拟合和误差分析引入到压力传感器的标定过程中,大幅度提高了标定的效率和可靠性。经此技术标定过的压力探头,在使用中具有互换性,减轻了数据后处理工作的难度。     

光纤光谱仪的研制及其在海水营养要素检测中的应用

基于交叉非对称的czerny-Turner结构, 研制了一种微型光纤光谱仪, 采用光栅分光、线阵CCD探测光, 基于复杂可编程逻辑器件及PC104设计CCD数据采集电路, 采样结果通过PC104总线上传至PC104工控机, 光谱仪及数据采集电路集成为一光谱仪模块, 约为96mm(宽)×104mm(长)×18mm(高), 该模块与PC104工控机之间通过PC104总线以“针”和“孔”形式层叠连接, 在具有体积小、功耗低、采样速度快等优点的同时还具有极好的抗震性, 非常适合于野外恶劣工作环境下的在线使用。将其应用于海水中铁等痕量元素及营养盐在线检测仪, 试验结果良好。     

大连港外海域船舶尾迹光学特征研究

通过大连港外海上实验测量船舶含气泡尾迹表观光学特征(如离水辐亮度、遥感反射率),分析了尾迹气泡对极度混浊的Ⅱ类水体海水表观光学特征的影响.实验结果证明:无论在可见光还是近红外波段,尾迹气泡都增强了海水表观光学量,如"耘海"船尾迹遥感反射率在可见光波段相对背景海水提高了50%,在近红外波段相对提高了159%.数据分析结果表明在此种水体中,气泡使得尾迹海水水色变黄,而不是在Ⅰ类水体中使水色变绿.随着观测点在尾迹中的位置靠近目标船,气泡数密度不断增加,遥感反射率也随之增强.