歧口凹陷新生界火成岩油藏特征及分布规律

歧口凹陷新生界发育了两类与火成岩相关的油藏：基性火山岩油藏和浅成侵入相辉绿岩蚀变带油藏,两者都为构造-岩性油藏。这两类油藏区域上受岩浆活动带控制,主要集中于NE向和EW向断裂转换带,并受烃源岩分布范围的影响而紧邻烃源岩分布;垂向上受区域盖层控制,集中于沙一中亚段和东三段。在转换带沙一中亚段和东三段内,火成岩能否富集成藏主要取决于储集系统的类型。开放式储集系统一方面利于流体替换使火成岩储集空间中的矿化水被及时排出减少次生矿物的形成,从而保护储集空间;另一方面利于富含有机酸流体进入火成岩储集体,通过溶蚀先期形成的杏仁体、裂缝充填物及火成岩中不稳定的矿物组分,使其储集空间扩大、容积增加,使火成岩的储集性能得以改善;另外,火成岩中的断裂通过与烃源岩的沟通为烃类注入富集成藏提供了必要的输导通道,致使这类储集系统能够富集烃类成藏。封闭式储集系统缺少这些条件,岩浆期后热液流体与成岩流体被包裹在火成岩储集空间内不能被排出,易形成次生矿物充填并堵塞这些空间,丧失其储集性能。部分未被充填的空间往往相互之间难以连通,并与生排烃地层隔绝而成为烃类难以注入的死孔隙,从而使这类储集系统难以聚集成藏。     

采用显式有限元方法求解开放系统动力响应的主要环节和问题

分析了采用显式有限元方法求解开放系统动力响应的主要环节中影响精度和稳定性的因素及其相互关系,指出数值解的精度和稳定性是这些因素共同作用的结果。归纳了合理输入数字荷载应满足的条件以及系统离散化准则。基于有限元方法推导了吸收边界的一般表达式,并据此提出吸收边界和透射边界之间存在确定的函数关系,并不是两类独立人工边界的新见解。认为内域的阻尼稳定性和人工边界的近场稳定性是大型复杂开放系统动力响应数值方法研究和应用中的关键科学问题,并从应用的角度提出了解决问题的思路和看法。     

测井技术新进展综述

在过去几年里,测井技术受石油勘探开发需要所推动,并借助现代电子和信息技术的新成就,发展十分迅速.三分量感应和正交偶极声波等新型成像测井仪器的出现,使地层各向异性研究成了热点.网络测井作为新一代测井系统,处于研制和完善阶段.新的裸眼井测井仪器,如新型的满贯组合测井系统、三分量阵列感应测井仪、油基泥浆电阻率成像测井仪等得到进一步改进.新的套管井测井仪器,如过套管电阻率测井仪、新型脉冲中子类测井仪等不断出现并得到改进.随钻测井系列不断增加,如随钻核磁共振测井、随钻地层测试,等等.新的测量工艺技术,如过套管地层测试、井下永久传感器工艺技术等正日趋成熟.新的测井概念,如测井-取心联作、套管外取心、动电测井、套管钻井测井等,给人耳目一新的感觉.对国外测井技术现状和水平进行全面而深入的研究,对于我们当前的科研和生产具有指导和借鉴作用.本文综合评述了近几年测井技术六个方面的重大进展：（1）岩石物理性质;（2）测井地面系统;（3）裸眼井测井;（4）套管井测井;（5）随钻测井;（6）射孔、取心和测试.在深入研究的基础上探讨了测井技术的发展方向,主要结论是岩石各向异性仍将是岩石物理研究的一个重点,测井传感器的物理模拟和数值模拟在测井仪器的设计中将扮演越来越重要角色,测井地面系统的发展主要集中在网络化、综合化的方向上,井下仪器的发展主要体现在集成化和阵列化的发展方向上.从长远看,随着井下永久传感器和施工工艺技术不断发展和完善,套管井测井中的许多项目最终会被取而代之.随钻测井技术仍将迅猛发展,随钻测井必将逐步取代电缆式裸眼测井.     

基于空间信息技术的城市开放空间信息系统设计

文章从空间信息技术的发展、数据库建设和集成等方面介绍了空间信息技术的发展趋势,以及城市开放空间系统的概念,并阐述了建立城市开放空间信息系统的必要性和可行性。以此为基础,论述了城市开放空间信息系统设计,主要包括城市开放空间信息系统的总体设计和子系统设计;最后设计了包括系统效率评价、系统可靠性评价、系统可扩展性评价、系统可移植性评价和系统效益评价等5个方面在内的城市开放空间信息系统评价方案。     

Behavior of soil plugs in open‐ended model piles driven into sands

Calibration chamber tests were conducted on open‐ended model piles driven into dried siliceous sands with different soil conditions in order to clarify the effect of soil conditions on load transfer mechanism in the soil plug. The model pile used in the test series was devised so that the bearing capacity of an open‐ended pile could be measured as three components: outside shaft resistance, plug resistance, and tip resistance. Under the assumption that the unit shaft resistance due to pile‐soil plug interaction varies linearly near the pile tip, the plug resistance was estimated. The plug capacity, which was defined as the plug resistance at ultimate condition, is mainly dependent on the ambient lateral pressure and relative density. The length of wedged plug that transfers the load decreases with the decrease of relative density, but it is independent of the ambient pressure and penetration depth. Under several assumptions, the value of earth pressure coefficient in the soil plug can be calculated. It gradually reduces with increase in the longitudinal distance from the pile tip. At the bottom of the soil plug, it tends to decrease with increase in the penetration depth and relative density, and to increase with the increase of ambient pressure. This may be attributed to (1) the decrease of friction angle as a result of increase in the effective vertical stress, (2) the difference in the dilation degree of the soil plug during driving with ambient pressures, and (3) the difference in compaction degree of soil plug during driving with relative densities. Based on the test results, an empirical equation was suggested to compute the earth pressure coefficient to be used in the calculation of plug capacity using one‐dimensional analysis, and it produces proper plug capacities for all soil conditions.     

A new look at the phenomenon of offshore pile plugging

Abstract

Open‐pipe piles are widely used for offshore structures. During the initial stage of installation, soil enters the pile at a rate equal to the pile penetration. As penetration continues, the inner soil cylinder may develop sufficient frictional resistance to prevent further soil intrusion, causing the pile to become plugged. The open‐ended pile then assumes the penetration characteristics of a closed‐ended pile. The mode of pile penetration significantly alters the soil‐pile interaction during and after installation. This affects the ultimate static bearing capacity (mainly in granular materials), the time‐dependent pile capacity (in clays), and the dynamic behavior and analysis of the piles.

Following a summary demonstrating the effects of pile plugging, a review of the common view of offshore pile plugging is undertaken. The interpretation of plugging by referring to the average plug length has led to the erroneous conclusion that in most piles significant plugging action does not occur.

Establishment of an analogy between soil samplers and open‐ended piles enabled correct identification of plugging by referring to the incremental changes in plug length. Examination of case histories of plugging of offshore piles revealed that beyond a certain penetration depth‐to‐diameter ratio, most piles are plugged.     

A pleistocene mummified ostracod from the Wairarapa district

A mummified specimen of Scottia insularis Chapman is recorded from beds of Upper Nukumaruan age (Pleistocene) at Gladstone in the Wairarapa Valley. This is the first record of a mummified species from New Zealand.     

高陡复杂露天矿边坡地应力场分区非线性反演分析

地应力是边坡稳定性分析的重要因素。在杏山铁矿露天高陡边坡实测地应力数据的基础上,采用多元线性回归方法,在充分考虑岩体自重与构造应力影响的情况下,对5类11种边界条件工况进行了有限差分FLAC3D的模拟加载,反演得出研究区域内的地应力场。鉴于该方法只能对地应力场进行线性和全区反演,这对内部结构极其复杂、矿区内各个区域岩性和地形差异较大的金属矿山矿体显然是不够准确的。为了克服以上缺陷,采用了非线性的神经网络反演方法,并根据岩体的岩性分布和地形起伏将整个矿区划分为5个分区,通过引入侧压力系数k0实现分区域反演,从而得到整个矿区的地应力场。研究表明,在复杂地质条件下,神经网络方法反演出的初始地应力分布更加合理。     

青州市实施废弃矿坑治理性开采的探讨

废弃矿坑治理是落实绿色发展、循环发展、低碳发展工作理念的一项重要内容。青州市人民政府结合该市实际,认真落实节约集约和资源优先战略,在废弃矿坑治理方面进行了有力的探索,走出了一条资源节约集约和高效利用的新路子,为全市露天采矿权监管和低丘缓坡未利用土地开发利用工作提供了有益借鉴。     

Inversion of two-dimensional tidal open boundary conditions of M<Subscript>2</Subscript> constituent in the Bohai and Yellow Seas

Two-dimensional tidal open boundary conditions of the M2 constituent in the Bohai and Yellow Seas(BYS) have been estimated by assimilating T/P altimeter data.During inversion,independent point(IP) strategy was used,in which several IPs on the open boundary is assumed,values at these IPs can be optimized with an adjoint method,and those at other grid points are determined by linearly interpolating the values at IPs.The reasonability and feasibility of the model are tested by ideal twin experiments.In the practical experiment(PE) after assimilation,the cost function may reach 1% or less of its initial value.Mean absolute errors in amplitude and phase can be less than 5 cm and 5°,respectively,and the obtained co-chart can show the character of the M2 constituent in the BYS.The results of the PE indicate that using only two IPs on the open boundary can yield better simulated results.