自动风向转换程序设计思路

由于OSSMO 2004版地面测报业务软件中抄录报表风向不太方便，故长治县气象局自行设计了自动风向角度和方位的转换程序。本程序用OBJECT PASCAL语言编写，在DELPHI中实现，采用Microsoft．Jet．OLEDB．4．0数据库引擎及ADO的方式操作数据库。     

关于数字化记录中前兆信号的分析

介绍了如何用MATLAB工具软件—小波分析的基本理论对数字信号进行数字滤波,着重分析和研究了呼和浩特地震台形变观测资料出现各种信号,提出了小波分析理论对台站实际工作的重要性。     

A study on the focal parameters of Shidian M =5.9 earthquake sequences in 2001

On the basis of about 300 earthquake wave forms observed in the Shidian M _S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 10¹⁰–10¹⁶ N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×10⁵–20×10⁵Pa. Through the statistical analyses of variation of corner frequency f _c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses. Foundation item: Scientific and Technological Key Project of Yunnan Province (2001NG46)     

固体潮观测数据预处理中的一些常用方法及其计算机实现

试图从台站产出的原始地形变前兆数据出发,提出一些实际操作性较强的预处理方法,从已编制好的软件中给出处理实例,从而达到提高台站观测人员的科研能力,填补资料预处理方面的某些空白的目的,这对于台站人员集观测、科研于一体有着十分重要的意义。从95-01-02项目厦门地震台前兆数据预处理的实践表明:这些方法取得了明显的实效,直到今天仍然具有很大的使用价值。     

Comparison of runoff characteristics of two adjacent basins in a tropical rainforest using a modified hydrologic cycle model with outflow

We propose a new runoff model including an outflow process that was applied to two adjacent basins (CL, TL) located in Lambir Hills National Park in north‐central Sarawak, Malaysia. Rainfall, runoff, topography, and soil layer thickness were observed. About 19% of annual runoff was observed in the CL basin (21.97 ha), whereas about 46% was observed in the TL basin (23.25 ha). It was inferred that the CL basin has an outflow because of low base flow, small runoff peak, and excessive water loss. By incorporating the outflow process into the HYdrological CYcle MODEL, good agreement between the data generated by the model and that observed was shown, with the exception of the data from the rainless period. Then, the fitting parameters for each basin were exchanged, except for the outflow parameter, and the characteristics of each basin were compared by calculating virtual runoff. As a result, the low base flow of the CL basin was estimated by the movement of the rainwater that escaped from the basin as deep percolation or lateral flow (11% of rainfall). The potential of the CL basin for mitigating flood and drought appeared to be higher than that of the TL basin. This is consistent with the topographic characteristics of the CL basin, which has a gentler slope than the TL basin. Copyright © 2012 John Wiley & Sons, Ltd.     

浅析网格化测量标志巡查信息直报技术

测量标志巡查是加强测量标志管护的重要手段。本文采用网格化理念设计,集成应用网络、智能移动终端、工作流、地图网络化服务等技术提出了一种测量标志巡查信息直报技术,可实现全省测量标志巡查信息的采集、实时在线或事后离线(WIFI等)巡查信息报送、审核、入库、应用等业务的网络化、准实时化、一体化,提高了测量标志巡查工作的科学化和规范化。     

Matlab在矿区GPS网间接平差中的应用

针对矿区GPS网间接平差,首先,详细地分析了GPS网间接平差原理,按一定格式将GPS网中的观测数据编制成观测文件,其次,按观测文件的格式编制算法将数据读入并存储,然后用间接平差原理处理得到平差结果,最后绘制网形和误差椭圆并生成平差报告,为矿区控制网的建立和矿区生产管理提供了便利。实验验证了本文程序的实用性。     

Integrating ASTER and GLASS broadband emissivity products using a multi-resolution Kalman filter

In this study, the multi-resolution Kalman filter (MKF) algorithm, which can handle multi-resolution problems with high computational efficiency, was used to blend two emissivity products: the Global LAnd Surface Satellite (GLASS) (BBE) product and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) narrowband emissivity (NBE) product. The ASTER NBE product was first converted into a BBE product. A new detrending method was used to transfer the BBEs into a process suitable for the MKF. The new detrending method was superior to the two existing methods. Finally, both the de-trended GLASS and ASTER BBE products were incorporated into the MKF framework to obtain the optimal estimation at each scale. Field measurements collected in North America were used to validate the integrated BBEs. Visually, the fusion map showed good continuity, with the exception of the border areas, and the quality of the fusion map was better than that of the original maps. The validation results indicate that the MKF improved the BBE product accuracy at the coarse scale. In addition, the MKF was capable of recovering missing pixels at a finer scale.     

气象观测设备运行状态综合判定技术应用

从气象观测设备运行保障角度出发,基于各观测设备自身运行状态检测信息,结合气象观测数据、气象观测元数据信息以及各级气象观测技术保障业务人员人工填报业务数据,研制了我国气象观测设备运行状态综合判定技术;同时制订了各气象观测设备运行状态分类标准和显示标准,将设备运行状态分为正常、报警、故障和非观测4类状态,分别用绿色、橙色、蓝色和灰色标识.气象观测设备运行状态综合判定技术在一定程度上促进了我国气象观测装备技术保障工作的规范化、标准化开展.该技术贴合气象装备技术保障业务实际需求,设备运行状态判定真实率达100％,结果经实践证明科学合理有效,基于该方法开展的设备运行监控保障工作提高了观测系统稳定可靠的运行能力.     

附有物理量和气象条件约束的光学卫星国土观测有效覆盖率评估

传统光学卫星国土观测覆盖评估建立在卫星对地理想覆盖的基础上,并未考虑卫星存储、星地数据传输、观测时长等物理量及观测区域气象因素对于覆盖性能的影响。本文针对光学遥感卫星的国土观测需求.建立国土观测有效覆盖能力评估指标体系,根据卫星数据存储能力、星地数据传输能力、卫星单圈最大观测时长、卫星观测太阳高度角等性能参数,提出了基于物理性能约束下的有效覆盖计算方法。根据气象台站历年气象数据,提出了气象约束因子的计算方法。综合考虑卫星物理性能约束与观测区域气象约束,计算光学遥感卫星对地观测有效覆盖能力。最后根据专家设计的光学遥感卫星国土观测有效覆盖能力评估指标权重,利用层次分析法(AHP)评估光学遥感卫星系统对于国土观测的需求满足程度。试验结果表明,本文方法对于国土观测有效覆盖的估算和评价结果更加精确,更接近于国土观测的实际应用需求,为对地观测有效覆盖能力评估提供了一种更为精确的可行方案。