Numerical simulation for 1975 Haicheng and 1999 Xiuyan earthquake processes by DDA+FEM

Introduction The Xiuyan earthquake(MS=5.4)on Nov.29,1999,occurred between Hushan town and Pi-anling town at the southeast end of the aftershocks of Haicheng earthquake(MS=7.3).These two earthquakes′sequences are highly similar in the way that the foreshocks are very frequent,focal mechanisms of the main shocks are about the same and fault strikes are approximately in the same direction.It is important to study these earthquakes for further research on seismogenesis to fore-cast earthquake…     

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

Numerical Modeling of Basin-Range Tectonics Related to Continent-Continent Collision

Continent-continent collision is the most important driving mechanism for the occurrence of various geological processes in the continental lithosphere. How to recognize and determine continent-continent collision,especially its four-dimensional temporal-spatial evolution, is a subject that geological communities have long been concerned about and studied. Continent-continent collision is mainly manifested by strong underthrnsting (subduction) of the underlying block along an intracontinental subduction zone and continuous obduction (thrusting propagation) of the overlying block along the intracontinental subduction zone, the occurrence of a basin-range tectonic framework in a direction perpendicular to the subduction zone and the flexure and disruption of the Moho. On the basis of numerical modeling, the authors discuss in detail the couplings between various amounts and rates of displacement caused by basin subsidence, mountain uplift and Moho updoming and downflexure during obduction (thrusting propagation) and subduction and the migration pattern of basin centers. They are probably indications or criteria for judgment or determination of continent-continent collision.     

Stochastic Modelling of the Impact of Flood Protection Measures Along the River Waal in the Netherlands

River flooding is a problem of international interest. In the past few years many countries suffered from severe floods. A large part of the Netherlands is below sea level and river levels. The Dutch flood defences along the river Rhine are designed for water levels with a probability of exceedance of 1/1250 per year. These water levels are computed with a hydrodynamic model using a deterministic bed level and a deterministic design discharge. Traditionally, the safety against flooding in the Netherlands is obtained by building and reinforcing dikes. Recently, a new policy was proposed to cope with increasing design discharges in the Rhine and Meuse rivers. This policy is known as the Room for the River (RfR) policy, in which a reduction of flood levels is achieved by measures creating space for the river, such as dike replacement, side channels and floodplain lowering. As compared with dike reinforcement, these measures may have a stronger impact on flow and sediment transport fields, probably leading to stronger morphological effects. As a result of the latter the flood conveyance capacity may decrease over time. An a priori judgement of safety against flooding on the basis of an increased conveyance capacity of the river can be quite misleading. Therefore, the determination of design water levels using a fixed-bed hydrodynamic model may not be justified and the use of a mobile-bed approach may be more appropriate. This problem is addressed in this paper, using a case study of the river Waal (one of the Rhine branches in the Netherlands). The morphological response of the river Waal to a flood protection measure (floodplain lowering in combination with summer levee removal) is analysed. The effect of this measure is subject to various sources of uncertainty. Monte Carlo simulations are applied to calculate the impact of uncertainties in the river discharge on the bed levels. The impact of the “uncertain” morphological response on design flood level predictions is analysed for three phenomena, viz. the impact of the spatial morphological variation over years, the impact of the seasonal morphological variation and the impact of the morphological variability around bifurcation points. The impact of seasonal morphological variations turns out to be negligible, but the other two phenomena appear to have each an appreciable impact (order of magnitude 0.05–0.1 m) on the computed design water levels. We have to note however, that other sources of uncertainty (e.g. uncertainty in hydraulic roughness predictor), which may be of influence, are not taken into consideration. In fact, the present investigation is limited to the sensitivity of the design water levels to uncertainties in the predicted bed level.     

对我国金刚石钻头胎体经典配方的理论优化和建议

选取合理可信的约束条件对我国经典的63号金刚石钻头胎体配方进行了优化验证，获得理论认识，并依此对已有成熟配方的改进提出了建议。     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

太原盆地地下水资源模拟研究

山西省太原盆地由于地下水长期超采,引发了地下水降落漏斗、地面沉降等环境地质问题。通过GMS建立地下水水流三维数值模型,基于模型预测了现状开采条件下地下水水位的变化趋势,并提出合理利用地下水资源的措施,为地下水资源的优化管理提供科学依据。     

多级次地下水流系统的最小能耗率原理初探

20世纪60年代初期,Tóth基于定水头上边界条件推导出解析解,得出多级次地下水流系统,是水文地质学里程碑式的突破,成功地解决了一系列理论和实际问题。但Tóth解析解存在的缺陷也长期沿袭：单纯重视数学模拟而忽视物理机制;将地形控制地下水位看成是普适性规律;忽视给定水头上边界数学模拟的失真。这些缺陷,尤其是忽视物理机制探究,不仅妨碍Tóth理论自身发展,而且导致地下水流系统理论尚未被国际水文地质界普遍接受。参照河流动力学中应用的最小能耗率原理,类比提出地下水流最小能耗率的表达式。基于已有的通量上边界地下水流模式数值模拟结果,进一步探究物理机制,归纳得出地下水流系统遵循最小能耗率原理的结论。