Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

Chernobyl radiocaesium in a karst system,Marble Cave,Crimea

 Surface contamination with radioactive caesium introduced into the environment after the accident at the Chernobyl nuclear plant was high enough in the Crimean Mountains to allow using radiocaesium as an indicator of penetration of radioactive contamination into a karst system. Caesium concentrations have been studied in soils above Marble Cave, Tchatyrdag Plateau, in percolation waters and in sediments transported by percolation waters within the cave. Contamination of the daylight surface with ¹³⁷Cs is about 30 kqB m^–2 which is approximately 13 times higher than the density of global fallouts. Besides ¹³⁷Cs, almost all samples showed presence of ¹³⁴Cs with the ¹³⁷Cs/¹³⁴Cs ratio close to that of Chernobyl contaminations. Concentrations of ¹³⁷Cs range from 9 to 15 mBq l^–1 in the present percolation waters in the cave. In sediments related to percolation waters ¹³⁴Cs is detected in some samples besides ¹³⁷Cs, although the effect of ²²⁸Ac is not ruled out. Surprisingly, the highest concentrations of radiocaesium were measured in "old" sediments in the cave's lower series. These sediments are not associated with modern percolation and are represented by a clay/moonmilk alternating sequence deposited in an old dried cave lake. Moonmilk layers have higher caesium content than clay. It is assumed that Chernobyl caesium was transported into the cave with aerosols which were then deposited mainly in areas where condensation occurs. The sampling site is located just in the boundary between two microclimatic zones with a temperature gradient of 0.5  °C. Active condensation processes occur in this area. Caesium was not detected in another similar sampling site (old lake deposits) located within homogeneous microclimatic conditions. If the above interpretation is correct, these results show the geochemical significance of the aerosol-condensation mechanism of mass transport and localisation. Received: 1 June 1995 · Accepted: 4 December 1995     

地震学定量预报指标的一种提取方法——对比筛选法

鉴于目前地震学综合定量预报指标的缺乏和预报工作的急需,尝试使用“对比筛选法(简称CSM方法)”进行地震学定量预报指标的提取试验。较之以往作法的进展在于:1.同时使用“有震”和“无震”两类样本对比筛选;2.对不同地区的地震学参数进行了归一化处理。这样做的显著优点是:1.可以较有效地提取“有震异常”和“正常变化”指标;2.提取的异常和预报指标具有定量化和普适性特点。 试验研究使用大华北地震区资料,研究对象取中强地震。经内符和外推检验,证明该方法提取的异常和预报指标有效性和实用性较高。     

Integrability of the Yang-Mills Hamiltonian system

This paper considers the integrability of generalized Yang-Mills system with the HamiltonianH _a (p, q)=1/2(p ₁ ² +p ₂ ² +a ₁ q ₁ ² +a ₂ q ₂ ² )+1/4q ₁ ⁴ +1/4a ₃ q ₂ ⁴ + 1/2a ₄ q ₁ ² q ₂ ² . We prove that the system is integrable for the cases: (A)a ₁=a ₂,a ₃=a ₄=1; (b)a ₁=a ₂,a ₃=1,a ₄=3; (C)a ₁=a ₂/4,a ₃=16,a ₄=6. Our main result is the presentation of these integrals. Only for cases A and B does the Yang-Mills Hamiltonian possess the Painlevé property. Therefore the Painlevé test does not take account of the integrability for the case C.     

The role of bathymetry and directional wave conditions on observed crescentic bar dynamics

Nearshore sandbars are important features in the surf zone of many beaches because they strongly influence the mean circulation and evolving morphology. Due to variations in wave conditions, sandbars can experience cross-shore migration and vary in shape from alongshore uniform (shore-parallel) to alongshore rhythmic (crescentic). Sandbar dynamics have been studied extensively, but existing observational studies usually do not quantify the processes leading to crescentic bar formation and straightening. This study analyses the dynamics of crescentic bar events at the fetch-limited beach of Castelldefels (northwestern Mediterranean Sea, Spain) using 7.5 years of hourly time-exposure video images and detailed wave conditions. The results show that, despite the generally calm wave conditions, the sandbars were very dynamic in the cross-shore and longshore directions. They often migrated rapidly offshore during storms (up to 70 m in one day) and more slowly onshore during post-storm conditions. Crescentic bars were often present at the study site (48% of the time), but only when the sandbar was at least 10 m from the shoreline. They displayed a large variability in wavelengths (100–700 m), alongshore migration speeds (0–50 m/day) and cross-shore amplitudes (5–20 m). Wavelengths increased for larger bar–shoreline distances and the alongshore migration speeds were strongly correlated with the alongshore component of the radiation stresses. Crescentic patterns typically developed during low–medium energetic waves with limited obliquity ( $\theta \lesssim 20$° at 10 m depth), while bar straightening occurred during medium–high energetic waves with strong oblique angles of incidence ( $\theta \gtrsim 15$°). Overall, this study provides further proof for the important role of wave direction in crescentic bar dynamics and highlights the strong dependence of crescentic bar development on the initial bathymetric configuration.     

Paleomagnetism of the Esterel rocks: a revisit 22 years after the thesis of Hans Zijderveld

For his PhD. thesis, Zijderveld (1975) studied the paleomagnetism of the Permian Esterel rocks (southern France). High-quality thermal and alternating-field demagnetization diagrams were interpreted to determine the direction of the characteristic natural magnetization. For the Esterel volcanics, a mean direction of Dec = 206.5°, Inc = –23°, ₉₅ = 5.7°, k = 112 was found for this magnetization. The dispersion in this mean is remarkably low. Only the declination of the Reyran Rhyolite in the Reyran River quarry clearly deviated from this mean. This deviating direction is not found in our samples, taken at the same site. As many faults occur in this quarry, it is suggested that Zijderveld sampled this rhyolite on a small rotated block. To verify whether the small dispersion in the mean paleomagnetic direction of the Esterel rocks has a geomagnetic or a rock-magnetic origin, two conglomerate tests were carried out. One of these might be interpreted as positive. The results of the other conglomerate test (Agay Formation) are ambiguous: four of the six measured boulders show directions close to the mean paleomagnetic direction of the Esterel rocks. Rock-magnetic measurements show that the remanence is carried by a magnetite and a hematite fraction. The low dispersion in the paleomagnetic directions, the conglomerate tests, and hematite as remanence carrier suggest that the characteristic remanence in the Esterel volcanics was not instantaneously acquired during cooling, but might be affected by remagnetization due to weathering.     

A laboratory experiment to monitor the contact state of a fault by transmission waves

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.     

Temporal behavior of the background seismicity rate in central Japan, 1998 to mid-2003

We studied the temporal behavior of the background shallow seismicity rate in 700 circular areas across inland Japan. To search for and test the significance of the possible rate changes in background seismicity, we developed an efficient computational method that applies the space–time ETAS model proposed by Ogata in 1998 to the areas. Also, we conducted Monte Carlo tests using a simulated catalog to validate the model we applied. Our first finding was that the activation anomalies were found so frequently that the constant background seismicity hypothesis may not be appropriate and/or the triggered event model with constraints on the parameters may not adequately describe the observed seismicity. However, quiescence occasionally occurs merely by chance. Another outcome of our study was that we could automatically find several anomalous background seismicity rate changes associated with the occurrence of large earthquakes. Very significant seismic activation was found before the M6.1 Mt. Iwate earthquake of 1998. Also, possible seismic quiescence was found in an area 150 km southwest of the focal region of the M7.3 Western Tottori earthquake of 2000. The seismicity rate in the area recovered after the mainshock.     

爆破夯实技术在水下地基处理中的应用

以某杂货码头和集装箱重力式码头水下地基处理工程为例，介绍了其地基处理的爆夯试验过程，得出了一次性爆破夯实厚层块石抛石基床的爆夯参数，并对其施工过程进行了监测。总结了类似工程施工的经验与教训。