Glacial deposits at the Boyne Bay Limestone Quarry,Portsoy, and their place in the late Pleistocene history of northeast Scotland

The glacial deposits at the Boyne Bay Limestone Quarry near Portsoy, a key Quaternary Site of Special Scientific Interest, comprise (i) a sandy, partly weathered diamicton (Craig of Boyne Till Formation, CBTF) resting on decomposed bedrock, (ii) a central, variably glaciotectonised assemblage of dark clay, diamicton and sand, with rafts of sand and weathered diamicton (Whitehills Glacigenic Formation, WGF), and (iii) an upper dark sandy diamicton (Old Hythe Till Formation, OHTF). The CBTF was probably derived from the west or southwest, and the WGF from seawards. Structures within the OHTF conform to deposition by east‐ or southeast‐moving ice from the Moray Firth, but some erratics indicate derivation from the south. The CBTF is believed to pre‐date the last (lpswichian) interglacial, but the WGF and OHTF both post‐date the early Middle Devensian, and are probably of Late Devensian age. It is proposed that the OHTF was deposited by ice from inland which was directed eastwards near the coast by a vigorous glacier in the Moray Firth, and that the complex, Late Devensian glacial history of the south coast of the Moray Firth as a whole is the result of the interplay of these two contemporary ice‐masses. British Geological Survey. © NERC 2000.     

土壤流失方程在山区耕地可持续利用适宜性评价与土地利用规划中的应用

应用已建立的土壤流失方程进行了滇东北山区基于可持续利用的耕地适宜性评价,以土壤抗蚀年限为主要指标,将山区耕地适宜性和可持续性程度分为高度适宜（高度持续）、中度适宜（中度持续）、低度适宜（低度持续）、有条件适宜（有条件持续）、不适宜（不可持续）５个等级。研究结果表明,土壤流失方程在山区耕地适宜性与可持续性评价以及土地利用规划工作中具有较大的应用价值。     

The Air-Sea Exchange of CO2 in the East Sea (Japan Sea)

During CREAMS expeditions, fCO₂ for surface waters was measured continuously along the cruise tracks. The fCO₂ in surface waters in summer varied in the range 320–440 μatm, showing moderate supersaturation with respect to atmospheric CO₂. In winter, however, fCO₂ showed under-saturation of CO₂ in most of the area, while varying in a much wider range from 180 to 520 μatm. Some very high fCO₂ values observed in the northern East Sea (Japan Sea) appeared to be associated with the intensive convection system developed in the area. A gas-exchange model was developed for describing the annual variation of fCO₂ and for estimating the annual flux of CO₂ at the air-sea interface. The model incorporated annual variations in SST, the thickness of the mixed layer, gas exchange associated with wind velocity, biological activity and atmospheric concentration of CO₂. The model shows that the East Sea releases CO₂ into the atmosphere from June to September, and absorbs CO₂ during the rest of the year, from October through May. The net annual CO₂ flux at the air-sea interface was estimated to be 0.032 (±0.012) Gt-C per year from the atmosphere into the East Sea. Water column chemistry shows penetration of CO₂ into the whole water column, supporting a short turnover time for deep waters in the East Sea. This revised version was published online in August 2006 with corrections to the Cover Date.     

Temporal and Spatial Variability of Phytoplankton Pigment Concentrations in the Japan Sea Derived from CZCS Images

Temporal and spatial variability of phytoplankton pigment concentrations in the Japan Sea are described, using monthly mean composite images of the Coastal Zone Color Scanner (CZCS). In order to describe the seasonal changes of pigment concentration from the results of the empirical orthogonal function (EOF) analysis, we selected four areas in the south Japan Sea. The pigment concentrations in these areas show remarkable seasonal variations. Two annual blooms appear in spring and fall. The spring bloom starts in the Japan Sea in February and March, when critical depth (CRD) becomes equal to mixed layer depth (MLD). The spring bloom in the southern areas (April) occurs one month in advance of that in the northern areas (May). This indicates that the pigment concentrations in the southern areas may increase rapidly in comparison with the northern areas since the water temperature increases faster in spring in the southern than in the northern areas. The fall bloom appears first in the southwest region, then in the southeast and northeast regions, finally appearing in the northwest region. Fall bloom appears in November and December when MLD becomes equal to CRD. The fall bloom can be explained by deepening of MLD in the Japan Sea. The pigment concentrations in winter are higher than those in summer. The low pigment concentrations dominate in summer.     

日本MW9.0地震后沂沭断裂带两侧块体相对运动及对地震活动的影响

基于连续GPS数据,利用滑动块体模型研究了日本M_W9.0地震前后沂沭断裂带两侧块体连续的相对运动状态,并研究其对区域地震活动的影响,结果表明日本地震以来：1）两侧块体呈右旋走滑兼挤压状态,平均走滑、挤压速率分别为0.9±0.1 mm·a^-1和-0.7±0.1 mm·a^-1,相比日本地震之前,运动过程更具起伏特征,可能与日本地震前后俯冲带两侧板块间相互运动状态的改变有关;2）沂沭断裂带两侧地区地震活动频次N、总释放能量折算震级M、地震活动度S值、地震b值与两侧块体相对运动的相关系数分别为0.66、0.69、0.74、-0.6,T检验显示相关性显著.在研究区地震能量集中释放阶段两侧块体相对运动方向和研究区主压应力方向一致,相对运动速率和地震活动强度变化具有同步特征,两侧块体相对运动对区域地震活动具有控制作用;3）莱州序列和乳山震群的发生可能与两侧块体相对运动促进的局部区域应力调整有关.     

基于Sato模型的内蒙古东北部地区尾波Q值

基于Sato模型,采用2016年3月至2018年6月内蒙古东北部及临近地区发生的526次地震事件,挑选M_L ≥ 2.0、记录清晰且信噪比较高的102次地震事件,拟合得到内蒙古东北部地区尾波Q值,得到Q_C（f）=（64.74 ±29.09）f^{（0.8925 ±0.0765）};Q值与依赖指数η成反比,且该区北部Q值偏高,南部Q值偏低,可能与地质构造及地震活动性有关。     

Pre-seismic and Co-seismic Crustal Movements of the M7.3 Kyushu Earthquake on April 16, 2016 in Japan

The time series of coordinates of a large number of GPS stations in the world,processed by Prof. Geoffrey Blewitt with GIPSY software are available at http://geodesy. unr. edu.Based on the time series of coordinates in the global reference frame of IGS08 at more than250 stations of continuous GPS observations,downloaded from the website,the co-seismic displacements of the M7. 3 Kyushu earthquake on April 16,2016 in Japan and the preseismic strain accumulations and displacements in the regional reference frame were obtained. The station of continuous GPS observation at BJFS near Beijing has been quite stable in displacement in the eastern part of China for more than 17 years since the beginning of its operation,and this station is used as the core station in the regional reference frame for the pre-seismic displacement of the Kyushu earthquake of M7. 3. The main feature of the pre-seismic displacements of the Kyushu earthquake is characterized by locking in the crust at and near the epicenter. The anomalous pre-seismic strain accumulation developed in an area of anomalous accumulation of the shear strain component of γ1 on the northeast side of the epicenter,with increasing size of the area and increasing magnitude in γ1. The largest area covered by the anomalous γ1 is about 2000 km2. The change in the E component at BJFS since November 26,2015 was caused by the replacement of the receiver and the antenna at the station. In order to study the shortterm change in displacements at stations at and near the epicenter,the time series at 3 stations with continuous GPS observations,2 at SUWN and DAEJ in south Korea and 1 at BJSH near Beijing were analyzed. The analysis shows that the displacements at the 3 stations have been quite stable in the same manner in east Asia. Thus,BJSH is used as the core station in the regional reference frame of displacement and the displacement time series show that there were no significant short term anomalies before the earthquake.     

Hybrid simulation: An early history

This historical note reports on the early days of the development of an experimental method called “hybrid simulation.” As background, the seeds of this concept, initiated in the early 1970s by Japanese researchers, are presented first, followed by initial efforts (regarded as Stage I) to realize the concept of hybrid simulation and its first applications to explore the seismic performance of structures. The initial research in this now-seminal field of earthquake engineering began in the early 1970s by Koichi Takanashi and his coworkers at the Institute of Industrial Science, the University of Tokyo. Their highly notable efforts in laying the groundwork for hybrid simulation occurred in the mid-1970s through the early 1980s by Takanashi (for steel structures) and Tsuneo Okada (for RC structures). These two men and their coworkers first applied hybrid simulation to explore the seismic behavior, performance, and design of various types of building structures. In Stage I, this method was called “the on-line computer-controlled test” or “pseudo dynamic test” because the unique feature of the method was the combined test and simulation and the intentional slow loading in the test. Extension of the scope and application of hybrid simulation occurred largely between the early 1980s and the early 1990s (regarded as Stage II) in conjunction with the United States–Japan joint research project. A few notable efforts made around that period are touched upon briefly, including error propagation and suppression in multi-degree-of-freedom hybrid simulation, application of the substructure methodology to hybrid simulation, and real-time hybrid simulation.