利用残差统计检验评估区域GPS大地测量网解算方案

采用美国喷气推进实验室JPL发展的GIPSY软件解算区域GPS网，比较了固家精密星历和同时固定精密星历及卫星钟参数2种解算方案，残差统计检验表明前者的左中仍保留了部分未解出的信号而后者的残差接近于白噪声高斯分布，解算结果与ITRF96的比较和对重复率的统计表明，残差分布合理的解算较优，简单的线差统计检验的计算可提供重要的解算评估。     

大中城市震后趋势快速判定软件系统的编制

大中城市震后趋势快速软件系统是用于某一显著的地震发生后，输入该地震发生后一段时间的地震序列，用以判定未来某一时段内后续地震的震级范围，系统包括了5大功能模块，数据格式转换模块，样本矩阵和待判短阵建立模块，分类矩阵建立模块，模糊软聚类模块和屏幕／打印机输出模块。     

湖南境内东西走向矿脉群的地质特点及找矿方向

在湖南境内有许多东西走向和接近东西走向的矿脉，不少矿脉具有大型矿床规模，有重要的经济价值。这类矿脉（床）的分布，大都与北东走向的韧性剪切带及其派生的裂隙系统有关，沿此种剪切带及其旁侧，是今后的找矿方向。     

三轴应力状态下单裂隙灾水机理的实验研究

介绍了单裂隙试样在不同三轴应力状态下，其导水性能的变化规律，充填物对裂隙导水性的影响，并得出了突水判据。     

大尺度山地上空臭氧亏损及其变化趋势

通过对卫星资料的分析,揭示了全球大尺度山地上空有大气臭氧亏损,其极大值出现在春季或初夏,线性回归分析表明:在1979～1991年中,全球大尺度山地上空的臭氧总量呈下降趋势。     

矿区水文地质研究进展及中长期发展方向

矿区水资源保护和矿山防治水这两个互相矛盾又紧密联系的问题给传统的矿山水文地质学带来了更多的挑战和机遇,迫切需要新理论、新技术的发展。为了更好的实现矿区未来地下水资源的开采、利用与保护以及采煤安全和区域水资源可持续利用,本文选择长治盆地为重点研究区,从采动引起的覆岩移动入手,在资料分析的基础上,采用相似材料模拟、综合物探、野外监测、现场注(压)水试验的方法,运用水文地质学原理研究了采煤引起含水层结构变异厚度及其渗透性变化特征;在此基础上,以长治盆地集中开采区水文地质条件和野外监测数据为基础,建立了区域地下水流场三维动态模拟试验台,为研究含水层结构变异后的地下水循环机理和水资源重新分布提供技术支撑;本文同时指出了我国矿山水文地质研究目前存在的问题和面临的挑战,分析了矿山水文地质学科的发展趋势,展望了未来相关分支学科和关键核心技术的发展方向与前景。     

Exploring the influence of loading geometry on the plastic flow properties of geological materials: Results from combined torsion + axial compression tests on calcite rocks

For technical reasons, virtually all plastic deformation experiments on geological materials have been performed in either pure shear or simple shear. These special case loading geometries are rather restrictive for those seeking insight into how microstructure evolves under the more general loading geometries that occur during natural deformation. Moreover, they are insufficient to establish how plastic flow properties might vary with the 3rd invariant of the deviatoric stress tensor (J₃) which describes the stress configuration, and so applications that use those flow properties (e.g. glaciological and geodynamical modelling) may be correspondingly compromised. We describe an inexpensive and relatively straightforward modification to the widely used Paterson rock deformation apparatus that allows torsion experiments to be performed under simultaneously applied axial loads. We illustrate the performance of this modification with the results of combined stress experiments performed on Carrara marble and Solnhofen limestone at 500°–600 °C and confining pressures of 300 MPa. The flow stresses are best described by the Drucker yield function which includes J₃-dependence. However, that J₃-dependence is small. Hence for these initially approximately isotropic calcite rocks, flow stresses are adequately described by the J₃-independent von Mises yield criterion that is widely used in deformation modelling. Loading geometry does, however, have a profound influence on the type and rate of development of crystallographic preferred orientation, and hence of mechanical anisotropy. The apparatus modification extends the range of loading geometries that can be used to investigate microstructural evolution, as well as providing greater scope for determining the shape of the yield surface in plastically anisotropic materials.     

Changing Trends of Winter Temperature in Recent 53 Years in Ningxia and Impact for Agriculture

Based on winter (December to February) daily temperature data of 20 meteorological stations in Ningxia Hui Autonomous Region since 1961, the interannual and interdecadal change trend and the mutation characteristics of the winter average, the maximum, and the minimum temperature of the whole Ningxia region, the Yellow River irrigation area, the central arid zone and the southern mountainous area were analyzed using linear trend, Mann-Kendall test and other methods; Meanwhile,the new characteristics of average temperature of the coldest month, <0 ℃ negative accumulated temperature in winter of the 21^st century and impact on agriculture were comparatively analyzed. The results showed that: Firstly, in the whole region and different areas of Ningxia, winter average temperature rose significantly before 2000, the Yellow River irrigation area was the most obvious in winter warming than that in the central arid zone and the southern mountainous area. 1985 was the abrupt change point of winter average temperatures in most areas of Ningxia. In the early 21^st century the winter average temperature rose slowly in most areas of Ningxia, even falling in the central arid zone. Secondly, the rise of average minimum temperature was significantly higher than average temperature and average maximum temperature in the winter, indicating that the rise of winter temperature in Ningxia was mainly due to winter minimum temperature. Since the 21^st century, the average maximum temperature had changed more dramatically than the average temperature in the winter, dropping in most areas. Winter average minimum temperature in addition to the central arid zone declined slightly after 2002, and continued to rise in most areas of Ningxia.Thirdly, both rise of the average temperature of the coldest month and dramatic reduction of the absolute value of negative accumulated temperature is not only beneficial to the northern planting boundary of winter crops spreading further to north and planting areas expanding with a lower risk of freezing injury, but also beneficial to crop pests increase.     

Study on Global Performances and Mooring-Induced Damping of A Semi-Submersible

The harsh environmental conditions bring strong nonlinearities to the hydrodynamic performances of the offshore floating platforms, which challenge the reliable prediction of the platform coupled with the mooring system. The present study investigates a typical semi-submersible under both the operational and the survival conditions through numerical and experimental methods. The motion responses, the mooring line tensions, and the wave loads on the longitudinal mid-section are investigated by both the fully non-linearly coupled numerical simulation and the physical experiment. Particularly, in the physical model test, the wave loads distributed on the semi-submersible’s mid-section were measured by dividing the model into two parts, namely the port and the starboard parts, which were rigidly connected by three six-component force transducers. It is concluded that both the numerical and physical model can have good prediction of the semi-submersible’s global responses. In addition, an improved numerical approach is proposed for the estimation of the mooring-induced damping, and is validated by both the experimental and the published results. The characteristics of the mooring-induced damping are further summarized in various sea states, including the operational and the survival environments. In order to obtain the better prediction of the system response in deep water, the mooring-induced damping of the truncated mooring lines applied in the physical experiment are compensated by comparing with those in full length. Furthermore, the upstream taut and the downstream slack mooring lines are classified and investigated to obtain the different mooring line damping performances in the comparative study.