Evolution and Morphodynamics of a Prograded Beach‐Ridge Foreland,Northern Baffin Island,Canadian Arctic Archipelago

Landward retreat (marine transgression) is a common response of coastal systems to rising relative sea level. However, given sufficient sediment supply, the coast may advance seaward. The latter response of gravel barriers has been recorded in parts of southeastern and northwestern Canada, where seaward‐rising sets of beach ridges are observed in areas of Holocene RSL rise. Cape Charles Yorke, northern Baffin Island, is a 5 km long gravel foreland characterized by seaward‐rising beach‐ridge crest elevations. The prograded morphology of the Cape Charles Yorke foreland is a prime example of coastal response to a combination of rising RSL and abundant sediment supply, an unusual and little‐documented pattern in the Canadian Arctic. The main gravel supply to Cape Charles Yorke is likely from eroding bedrock and raised marine deposits southwest of the foreland. Although not the dominant sediment source, the Cape Charles Yorke delta contributed to the formation of the foreland by sheltering it from easterly storm waves and providing an anchor point for the prograding ridges. The truncation of relict ridges by the modern shoreline suggests a recent regime shift from continuous deposition to predominant erosion. The cause and timing of this shift are unknown but could result from a recent dwindling in sediment supply, increased accommodation space, increased wave energy, and/or an accelerated rise of relative sea level.     

Quantifying the variability and allocation patterns of aboveground carbon stocks across plantation forest types,structural attributes and age in sub-tropical coastal region of KwaZulu Natal,South Africa using remote sensing

Quantifying the variability and allocation patterns of aboveground carbon stocks across plantation forests is central in deriving accurate and reliable knowledge and understanding of the extent to which these species contribute to the global carbon cycle and towards minimizing climate change effects. The principal objective of this study was to quantify the variability and allocation patterns of aboveground carbon stocks across Pinus and Eucalyptus plantation forests, tree-structural attributes (i.e. stems, barks, branches and leaves) and age groups, using models developed based on remotely sensed data. The results of this study demonstrate that aboveground carbon stocks significantly (α = 0.05) vary across different plantation forest species types, structural attributes and age. Pinus taeda and Eucalyptus grandis species contained aboveground carbon stocks above 110 t C ha⁻¹, and Eucalyptus dunii had 20 t C ha⁻¹. Across plantation forest tree structural attributes, stems contained the highest aboveground carbon stocks, when compared to barks, branches and leaves. Aboveground carbon stock estimates also varied significantly (α = 0.05) with stand age. Mature plantation forest species (i.e. between 7 and 20 years) contained the highest aboveground carbon stock estimates of approximately 120 t C ha⁻¹, when compared to younger species (i.e. between 3 and 6 years), which had approximately 20 t C ha⁻¹. The map of aboveground carbon stocks showed distinct spatial patterns across the entire study area. The findings of this study are important for understanding the contribution of different plantation forest species, structural attributes and age in the global carbon cycle and possible climate change moderation measures. Also, this study demonstrates that data on vital tree structural attributes, previously difficult to obtain, can now be easily derived from cheap and readily-available satellite data for inventorying carbon stocks variability.     

Geochemical constraints on the contribution of Louisville seamount materials to magmagenesis in the Lau back-arc basin,SW Pacific

Seamounts are an integral part of element recycling in global subduction zones. The published trace element and Pb-Sr-Nd isotope data for basaltic lavas from three key segments (Central Lau Spreading Ridge (CLSR), Eastern Lau Spreading Ridge (ELSR), and Valu Fa Ridge (VFR)) of the Lau back-arc basin were compiled to evaluate the contribution of Louisville seamount materials to their magma genesis. Two geochemical transitions, separating three provinces with distinct geochemical characteristics independent of ridge segmentation, were identified based on abrupt geochemical shifts. The origin of the geochemical transitions was determined to be the result of drastic compositional changes of subduction components added into the mantle source, rather than the transition from Indian to Pacific mid-ocean ridge basalt (MORB) mantle, or due to variable mantle fertilities. The most likely explanation for the drastic shifts in subduction input is the superimposition of Louisville materials on ‘normal’ subduction components consisting predominantly of aqueous fluids liberated from the down-going altered oceanic crust and minor pelagic sediment melts. Quantitative estimation reveals that Louisville materials contributed 0–74% and 21–83% of the Th budget, respectively, to CLSR and VFR lavas, but had no definite contribution to the lavas from the ELSR, which lies farthest away from the subducted Louisville seamount chain (LSC). The spatial association of the subducted LSC with the Louisville-affected segments suggests that the Louisville signature is regionally but not locally available in the Tonga subduction zone. Besides, the preferential melting of subducted old Cretaceous LSC crust instead of the old normal Pacific oceanic crust at similar depths implies that elevated temperature across the subduction interface or seamount erosion and rupture were required to trigger melting. A wider implication of this study, thus, is that seamount subduction may promote efficiency of element recycling in subduction zones.     

Interplay between an axial channel belt,slope gullies and overbank deposition in the Puchkirchen Formation in the Molasse Basin,Austria

Deep‐water sediments in the Molasse Basin, Austria, were deposited in a narrow foreland basin dominated by a large channel belt located between the steep Alpine fold and thrust belt to the south and the gentler northern slope off the Bohemian Massif. Several gas fields occur outside the channel belt, along the outer bend of a large meander. Accumulation of these overbank sediments reflects a complicated interplay between slope accommodation and debris‐flow and turbidity‐flow interaction within the channel. The tectonically oversteepened northern slope of the basin (ca 2 to 3°) developed a regionally important erosional surface, the Northern Slope Unconformity, which can be traced seismically for >100 km in an east–west direction and >20 km from the channel to the north. The slope preserves numerous gullies sourced from the north that eroded into the channel belt. These gullies were ca 20 km long, <1 km wide and ca 200 m deep. As the channel aggraded, largely inactive and empty gullies served as entry points into the overbank area for turbidity currents within the axial channel. Subsequently, debris‐flow mounds, 7 km wide and >15 km long, plugged and forced the main channel to step abruptly ca 7 km to the south. This resulted in development of an abrupt turn in the channel pathway that propagated to the east and probably played a role in forming a sinuous channel later. As debris‐flow topography was healed, flows spread out onto narrow area between the main channel and northern slope forming a broad fine‐grained apron that serves as the main gas reservoir in this area. This model of the overbank splay formation and the resulting stratigraphic architecture within the confined basin could be applied in modern and ancient systems or for subsurface hydrocarbon reservoirs where three‐dimensional seismic‐reflection data is limited. This study elucidates the geomorphology of the oversteepened slope of the under‐riding plate and its effects on the sedimentation.     

Evaluating along‐strike variation using thin‐bedded facies analysis,Upper Cretaceous Ferron Notom Delta,Utah

Thin‐bedded delta‐front and prodelta facies of the Upper Cretaceous Ferron Notom Delta Complex near Hanksville in southern Utah, USA, show significant along‐strike facies variability. Primary initiation processes that form these thin beds include surge‐type turbidity currents, hyperpycnal flows and storm surges. The relative proportion of sedimentary structures generated by each of these depositional processes/events has been calculated from a series of measured sedimentological sections within a single parasequence (PS6–1) which is exposed continuously along depositional strike. For each measured section, sedimentological data including grain size, lithology, bedding thickness, sedimentary structures and ichnological suites have been documented. Parasequence 6–1 shows a strong along‐strike variation with a wave‐dominated environment in the north, passing abruptly into a fluvial‐dominated area, then to an environment with varying degrees of fluvial and wave influence southward, and back to a wave‐dominated environment further to the south‐east. The lateral facies variations integrated with palaeocurrent data indicate that parasequence 6–1 is deposited as a storm‐dominated symmetrical delta with a large river‐dominated bayhead system linked to an updip fluvial feeder valley. This article indicates that it is practical to quantify the relative importance of depositional processes and determine the along‐strike variation within an ancient delta system using thin‐bedded facies analysis. The wide range of vertical stratification and grading sequences present in these event beds also allows construction of conceptual models of deposition from turbidity currents (i.e. surge‐type turbidity currents and hyperpycnal flows) and storm surges, and shows that there are significant interactions and linkages of these often paired processes.     

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.     

Nature,origin and evolution of a Late Pleistocene incised valley‐fill,Sunda Shelf,Southeast Asia

Understanding the stratigraphic fill and reconstructing the palaeo‐hydrology of incised valleys can help to constrain those factors that controlled their origin, evolution and regional significance. This condition is addressed through the analysis of a large (up to 18 km wide by 80 m deep) and exceptionally well‐imaged Late Pleistocene incised valley from the Sunda Shelf (South China Sea) based on shallow three‐dimensional seismic data from a large (11 500 km²), ‘merge’ survey, supplemented with site survey data (boreholes and seismic). This approach has enabled the characterization of the planform geometry, cross‐sectional area and internal stratigraphic architecture, which together allow reconstruction of the palaeo‐hydrology. The valley‐fill displays five notable stratigraphic features: (i) it is considerably larger than other seismically resolvable channel forms and can be traced for at least 180 km along its length; (ii) it is located in the axial part of the Malay Basin; (iii) the youngest part of the valley‐fill is dominated by a large (600 m wide and 23 m deep), high‐sinuosity channel, with well‐developed lateral accretion surfaces; (iv) the immediately adjacent interfluves contain much smaller, dendritic channel systems, which resemble tributaries that drained into the larger incised valley system; and (v) a ca 16 m thick, shell‐bearing, Holocene clay caps the valley‐fill. The dimension, basin location and palaeo‐hydrology of this incised valley leads to the conclusion that it represents the trunk river, which flowed along the length of the Malay Basin; it connected the Gulf of Thailand in the north with the South China Sea in the south‐east. The length of the river system (>1200 km long) enables examination of the upstream to downstream controls on the evolution of the incised valley, including sea‐level, climate and tectonics. The valley size, orientation and palaeo‐hydrology suggest close interaction between the regional tectonic framework, low‐angle shelf physiography and a humid‐tropical climatic setting.     

High‐resolution reconstruction of a coastal barrier system: impact of Holocene sea‐level change

This study presents a detailed reconstruction of the sedimentary effects of Holocene sea‐level rise on a modern coastal barrier system. Increasing concern over the evolution of coastal barrier systems due to future accelerated rates of sea‐level rise calls for a better understanding of coastal barrier response to sea‐level changes. The complex evolution and sequence stratigraphic framework of the investigated coastal barrier system is reconstructed using facies analysis, high‐resolution optically stimulated luminescence and radiocarbon dating. During the formation of the coastal barrier system starting 8 to 7 ka rapid relative sea‐level rise outpaced sediment accumulation. Not before rates of relative sea‐level rise had decreased to ca 2 mm yr^?1 did sediment accumulation outpace sea‐level rise. From ca 5·5 ka, rates of regionally averaged sediment accumulation increased to 4·3 mm yr^?1 and the back‐barrier basin was filled in. This increase in sediment accumulation resulted from retreat of the barrier island and probably also due to formation of a tidal inlet close to the study area. Continued transgression and shoreface retreat created a distinct hiatus and wave ravinement surface in the seaward part of the coastal barrier system before the barrier shoreline stabilized between 5·0 ka and 4·5 ka. Back‐barrier shoreline erosion due to sediment starvation in the back‐barrier basin was pronounced from 4·5 to 2·5 ka but, in the last 2·5 kyr, barrier sedimentation has kept up with and outpaced sea‐level. In the last 0·4 kyr the coastal barrier system has been prograding episodically. Sediment accumulation shows considerable variation, with periods of rapid sediment deposition and periods of non‐deposition or erosion resulting in a highly punctuated sediment record. The study demonstrates how core‐based facies interpretations supported by a high‐resolution chronology and a well‐documented sea‐level history allow identification of depositional environments, erosion surfaces and hiatuses within a very homogeneous stratigraphy, and allow a detailed temporal reconstruction of a coastal barrier system in relation to sea‐level rise and sediment supply.     

Amber‐bearing Bed in a Shallow Marine Setting,an Example from the Lower Cretaceous Miyako Group,Northeastern Japan

A previously unknown amber‐bearing bed in the Lower Cretaceous Miyako Group, northeastern Japan, was deposited within a sequence that contains abundant marine macrofossils and wave‐generated sedimentary structures that suggest deposition in an open shallow marine environment. How the amber was transported from its terrestrial origin to the marine environment is unclear, but sedimentary gravity flow is a strong candidate. Our observations suggest that the occurrence of amber clasts in sediments deposited in open and closed shallow marine environments is not uncommon. Thus, in addition to terrestrial sediments, sediments of marine origin have potential as targets for amber exploration.     

Mass Fractions of S,Cu, Se,Mo, Ag,Cd, In,Te, Ba,Sm, W,Tl and Bi in Geological Reference Materials and Selected Carbonaceous Chondrites Determined by Isotope Dilution ICP‐MS

Mass fractions of S, Cu, Se, Mo, Ag, Cd, In, Te, Ba, Sm, W and Tl were determined by isotope dilution sector field ICP‐MS in the same sample aliquot of reference materials using HF‐HNO₃ digestion in PFA beakers in pressure bombs and glassy carbon vessels in a high‐pressure asher (HPA‐S) for comparison. Additionally, Bi was determined by internal standardisation relative to Tl. Because isobaric and oxide interferences pose problems for many of these elements, efficient chromatographic separation methods in combination with an Aridus desolvator were employed to minimise interference effects. Repeated digestion and measurement of geological reference materials (BHVO‐1, BHVO‐2, SCo‐1, MAG‐1, MRG‐1 and UB‐N) gave results with < 5% relative intermediate precision (1s) for most elements, except Bi. Replicates of NIST SRM 612 glass digested on a hot plate were analysed by the same methods, and the results agree with reference values mostly within 2% relative deviation. Data for the carbonaceous chondrites Allende, Murchison, Orgueil and Ivuna are also reported. Digestion in a HPA‐S was as efficient as in pressure bombs, but some elements displayed higher blank levels following HPA‐S treatment. Pressure bomb digestion yielded precise data for volatile S, Se and Te, but may result in high blanks for W.