山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。     

山区煤田地震勘探中静校正存在的问题及其改进方法

在山区或地表复杂地区进行地震勘探,采用基于地表一致性假设的静校正将会严重影响勘探效果,该影响主要源于地表一致性假设存在着不合理因素。如较高的低速带、巨厚的低速带、基岩裸露、地形起伏较大等。为分析一致性假设静校正偏差产生的原因及大小．构建一地形起伏、基岩出露的复杂模型,通过正演其射线路径,对比其时距曲线与理论时距曲线的差异,以及二者静校正量误差大小。模型分析证实该差异与偏移距、地震波穿透深度及基准面高程之间存在直接的联系,据此提出了改进方法,如浮动基准面校正及分块静校正等。理论模型和实际地震资料试算表明,使用改进的方法可有效改善地震时间刮面同相轴聚焦效果及连续性。     

Die Rheingrabenrandverwerfung im Wattkopftunnel bei Ettlingen (Nordschwarzwald)

The Wattkopftunnel, near Ettlingen (Nordschwarzwald), drives through the eastern margin of the Rheingraben. The tunnel passes cenozoic and mesozoic sediments. Early quarternary and tertiary beds are situated west of the main thrust of the Rheingraben. Fossil record indicates upper Oligocene age (Chatt) for parts of the tertiary sediments. At the eastern border of the Rheingraben, wedges of jurassic and middle triassic series are squeezed. East of the Rheingraben the tunnel drives in the lower triassic Bausandstein. The eastern margin of the Rheingraben was investigated in detail during tunneling. Faults of the Rheingraben margin are distributed in an 130 meter wide fault zone in the tunnel. Total stratigraphic separation by the normal faults reaches more than 2 000 meters. The cenozoic sequence suffered synsedimentary to early diagenetic deformation, while the mesozoic series are characterized by ruptural deformation. The fault- and joint system is directed in the rheinische Richtung (SSW-NNE). East of the Rheingraben a second direction occur, running parallel to the lower Albtal (W-E).

     

利用主成分分析改善土地利用变化的遥感监测精度——以珠江三角洲城市用地扩张为例

近年来,珠江三角洲由于经济的快速发展,城市用地急剧增加,利用多时相的遥感图,可以定量地监测这种城市化的现象。但理,由一般的遥感动态监测方法所得的结果往往夸大变化的程度,以及获得一些不合理的结论．该文提出主成分分析的方法来改善遥感动态监测的精度。将该方法应用应用于珠江三角洲发展最快的东莞市,获得了较满意的结果。     

New paleomagnetic results from the Aegean extensional province

Various Oligocene formations from NE Greece (ignimbrites from the Medousa area, rhyolites from Zagradenia, granodiorites from Elatia) show discordant paleomagnetic signatures, in each case indicating small cw (clockwise) rotation and also inclination flattening. Marls from Pithion were partly remagnetized in a present-day field. Samples that contain ancient magnetization components also indicate small cw rotation and inclination flattening. However, the magnetization of andesites from Peplos reflects a considerably larger rotation, likely owing to local tectonics. In the context of previous work in the area, these results are used to propose a subdivision of NE Greece into four structural zones of distinctive rotational behaviour (from east to west): sites in zone 1, east of the Kavala-Xanthi-Komotini fault (KXK), show various cw and ccw (counterclockwise) rotation angles owing to complex kinematics resulting from the interaction of the KXK and the north-Anatolian fault zone. However, zone 2, between the KXK and the Strymon valley, is structurally homogeneous ( 10° cw rotation). The paleomagnetic signature of the Vertiskos massif (zone 3) implies a larger (> 30°) cw rotation, whereas sites in the Vardar basin (zone 4) contain a paleomagnetic signature similar to that of zone 2. This suggests a motion of the Vertiscos massif, a meta-ophiolitic nappe, relative to underlying strata. Indeed, zones 2 and 4 may be parts of the same structural unit which underlies this nappe.     

Possible ways to decipher spatial distribution of mineral resources

Regularity of structural patterns can be connected to planetary disjunctive systems (paleosystems). A computerized universal model of these systems should be developed that may be helpful to predict unknown localities of mineral resources controlled by tectonic processes. The specific character of tectonic phenomena is to be respected in geomathematical models. Some suggestions for applications are given.     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

Comparison of structural and least-squares lines for estimating geologic relations

Two different goals in fitting straight lines to data are to estimate a true linear relation (physical law) and to predict values of the dependent variable with the smallest possible error. Regarding the first goal, a Monte Carlo study indicated that the structural-analysis (SA) method of fitting straight lines to data is superior to the ordinary least-squares (OLS) method for estimating true straight-line relations. Number of data points, slope and intercept of the true relation, and variances of the errors associated with the independent (X) and dependent (Y) variables influence the degree of agreement. For example, differences between the two line-fitting methods decrease as error in X becomes small relative to error in Y. Regarding the second goal—predicting the dependent variable—OLS is better than SA. Again, the difference diminishes as X takes on less error relative to Y. With respect to estimation of slope and intercept and prediction of Y, agreement between Monte Carlo results and large-sample theory was very good for sample sizes of 100, and fair to good for sample sizes of 20. The procedures and error measures are illustrated with two geologic examples.     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

Spatial and temporal variability of Holocene temperature in the North Atlantic region

The early Holocene climate of the North Atlantic region was influenced by two boundary conditions that were fundamentally different from the present: the presence of the decaying Laurentide Ice Sheet (LIS) and higher than present summer solar insolation. In order to assess spatial and temporal patterns of Holocene climate evolution across this region, we collated quantitative paleotemperature records at sub-millennial resolution and synthesized their temporal variability using principal components analysis (PCA). The analysis reveals considerable spatial variability, most notably in the time-transgressive expression of the Holocene thermal maximum (HTM). Most of the region, but especially areas peripheral to the Labrador Sea and hence closest to the locus of LIS disintegration, experienced maximum Holocene temperatures that lagged peak summer insolation by 1000-3000 years. Many sites from the northeastern North Atlantic sector, including the Nordic Seas and Scandinavia, either warmed in phase with maximum summer insolation (11,000-9000 years ago) or were less strongly lagged than the Baffin Bay-Labrador Sea region. These spatially complex patterns of Holocene climate development, which are defined by the PCA, resulted from the interplay between final decay of the LIS and solar insolation forcing.