大洋多金属结核中1nm锰矿相的相变及其主要控制因素研究

多金属结核样品在室温中放置或加热干燥后 ,其中的 1nm锰矿相会部分或全部地相变为 0 7nm锰矿相 ,这说明 0 7nm锰矿相可能不是多金属结核的原生锰矿相 ,而仅仅是 1nm锰矿相的相变产物。研究结果表明 :1nm锰矿相结构中的Cu2 + 、Co2 + 、Ni2 + 等金属阳离子的含量与其结构稳定性有正相关关系 ,即金属离子含量越高 ,其结构越稳定 ,1nm锰矿相越不易相变为 0 7nm锰矿相 ,反之亦然 ;另外 ,不同金属阳离子稳定 1nm锰矿相结构的能力也不同 ,结核中几种主要金属阳离子对 1nm锰矿相结构的稳定能力从大到小为 :Ni2 + >Cu2 + >Co2 + >Zn2 + >Ca2 + =Mg2 + 。     

石香肠构造研究进展

100多年来，石香肠构造的研究取得了巨大的进展。出现了骨节状石香肠、不对称鱼嘴构造、复合石香肠等新的构造样式。在石香肠构造形成理论研究上，关于断裂石香肠构造形成的理论推导、肿缩石香肠构造形成的流变参数的限制、多层石香肠构造在大地构造研究中的应用、石香肠构造控矿以及石香肠构造流变计的研究已经展开并取得了较大进展。理论研究的深入和应用研究的拓展还需要借助其他学科的研究成果。     

石香肠构造研究综述

石香肠构造是一种传统的线状构造，由于其在区域构造应力场方面的研究意义及其所包含的流变学信息和控矿意义等一直吸引着研究者的关注。简述了近几十年来石香肠构造在形态学研究上的进展，分析了其在理论研究上的成果，概括了其在应用研究方面的现状，并对当前及今后石香肠构造的研究方向提出了建议。     

~(40)Ar/~(39)Ar Dating of Deformation Events and Reconstruction of Exhumation of Ultrahigh-Pressure Metamorphic Rocks in Donghai, East China

Recent investigations reveal that the ultrahigh-pressure metamorphic (UHPM) rocks in the Donghai region of East China underwent ductile and transitional ductile-brittle structural events during their exhumation. The earlier ductile deformation took place under the condition of amphibolite facies and the later transitional ductile-brittle deformation under the condition of greenschist facies. The hanging walls moved southeastward during both of these two events. The 40Ar/39Ar dating of muscovites from muscovite-plagioclase schists in the Haizhou phosphorous mine, which are structurally overlain by UHPM rocks, yields a plateau age of 218.0±2.9 Ma and isochron age of 219.8Ma, indicating that the earlier event of the ampibolite-facies deformation probably took place about 220 Ma ago. The 40Ar/39Ar dating of oriented amphiboles parallel to the movement direction of the hanging wall on a decollement plane yields a plateau age of 213.1±0.3 Ma and isochron age of 213.4±4.1 Ma, probably representing the age o     

应用航放资料寻找非放射性金属矿产效果探讨

本通过对粤北地区已知的52个非放射性金属矿床（点）的地质、物化探特征的统计资料综合分析，建立了评价非放射性金属矿产成矿远景的航空能谱参数模型，结合重磁测量、重砂测量及金属量测量成果，预测了4片非放射性金属矿产成矿远景区。     

新型组合连梁控制结构体系

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。     

中国西北叠合盆地的主要构造特征

探讨了中国西北地区大型叠合含油气盆地的主要特征 ,研究表明 ,在中国西北叠合盆地发展演化过程中 ,构造变革和构造耦合起着主导作用。构造变革包括大地构造格局的转变、沉积区和剥蚀区的转换、盆地类型的转换、大型区域性不整合的出现以及发生盆地构造反转等 ,这种构造变革具有多期性。叠合盆地构造耦合的方式主要涉及深部和浅部构造的耦合和盆山耦合等。盆山转换、盆山过渡带深部浅部构造的耦合、盆地沉降与造山带隆升耦合以及不同方向构造的耦合 ,反映了盆山耦合的多样性和复杂性。中国西北叠合盆地构造特征主要表现为构造的分层性、分带性、分段性、交叉性以及区域构造应力场的多变性 ,喜马拉雅运动对于中国西北叠合盆地最后的构造改造以及构造定型起着重要的制约作用。     

河南省文峪金矿床构造控矿规律研究

峪金矿床是小秦岭金矿带内一大型金矿床，属韧—脆性叠加剪切带石英脉型金矿，构造是其首要控矿因素。早期韧性剪切带只对矿脉起宏观控制作用。晚期的脆性断裂为含金石英脉的直接控矿构造。成矿期脆性断裂的多次继承性活动分别控制了热液期4个成矿阶段。脆性断裂形成的空间形态对矿体形态产状具控制作用。有利的矿化富集部位为：①显示压扭性质的近东西向断裂沿走向产状变化处，沿倾向由陡变缓处，断裂面的凹凸转变处；②断裂分支复合部位；③成矿期断裂多次脉动的启张部位；④成矿期断裂构造继承性活动强的部位等。在构造控矿研究的基础上，结合前人部分研究成果。构建了该矿床构造控矿模式。     

Scattering of elastic waves by a general anisotropic basin. Part 2: a 3D model

Scattering of plane harmonic waves by a three‐dimensional basin of arbitrary shape embedded within elastic half‐space is investigated by using an indirect boundary integral equation approach. The materials of the basin and the half‐space are assumed to be the most general anisotropic, homogeneous, linearly elastic solids without any material symmetry (i.e. triclinic). The unknown scattered waves are expressed in terms of three‐dimensional triclinic time harmonic full‐space Green's functions. The results have been tested by comparing the surface response of semi spherical isotropic and transversely isotropic basins for which the numerical solutions are available. Surface displacements are presented for a semicircular basin subjected to a vertical incident plane harmonic pseudo‐P‐, SV‐, or SH‐wave. These results are compared with the motion obtained for the corresponding equivalent isotropic models. The results show that presence of the basin may cause significant amplification of ground motion when compared to the free‐field displacements. The peak amplitude of the predominant component of surface motion is smaller for the anisotropic basin than for the corresponding isotropic one. Anisotropic response may be asymmetric even for symmetric geometry and incidence. Anisotropic surface displacement generally includes all three components of motion which may not be the case for the isotropic results. Furthermore, anisotropic response strongly depends upon the nature of the incident wave, degree of material anisotropy and the azimuthal orientation of the observation station. These results clearly demonstrate the importance of anisotropy in amplification of surface ground motion. Copyright © 2003 John Wiley & Sons, Ltd.     

Asymmetric one‐storey elastic systems with non‐linear viscous and viscoelastic dampers: Simplified analysis and supplemental damping system design

Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd.