Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

Ground‐shaking mapping for a scenario earthquake considering effects of geological conditions: a case study for the 1995 Hyogo‐ken Nanbu,Japan earthquake

In order to examine the applicability of ground‐shaking mapping techniques to a near‐field earthquake, a peak ground velocity map of the 1995 Hyogo‐ken Nanbu, Japan earthquake computed from seismic zoning methods that consider the effects of geological conditions is compared with the actual observed intensity map. When computing the ground‐shaking map, the site amplification at each site is calculated in terms of the average shear‐wave velocity of the ground estimated from the corresponding geomorphological conditions. This map shows a relatively good agreement with the observed intensity map. However, the computations provide smaller values for certain disastrous areas of the earthquake, where the effects on ground motion of a deep, irregular underground structure have been reported. The effect of such structures on site response is examined implementing 2D FEM analyses, thereby being also incorporated into the method. Results considering the effect of the irregular underground structure show better agreement with the observed intensity map. Copyright © 2002 John Wiley & Sons, Ltd.     

EH-4系统观测资料的非远区场校正研究

EH－4系统实测的卡尼亚视电阻率在非远区场时应作必要的校正。基于导出的EH－4系统的卡尼亚电阻率ρxy和ρyx的表达式，采用多项式分段逼近的方法，建立EH－4系统测深数据的全频域的视电阻率算法。根据建立的算法对均匀大地、二层大地和三层大地模型的EH－4系统测深数据进行非远区场校正的结果表明：均匀大地时，全频域的视电阻率与真电阻率吻合很好，D型、K型和Q型断面的视电阻率曲线与MT法的接近，G型、H型和A型的视电阻率曲线得到很大改善。     

扎赉诺尔煤田水文地球化学特征及成因分析

扎赉诺尔煤田地处山前,有利的地理环境条件形成了独特的水文地质特征—地下水的垂直分带和地下水顺层径流。其特有的水文地球化学环境导致了地下水成分的差异性。本文从水文地球化学的角度,对煤田地下水的水文地球化学特征及成因进行了论述分析。     

Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

Study on dynamics of tectonic evolution in the Fushun Basin, Northeast China

The updated study shows that the taphrogenesis of basement of the Fushun Basin is not a kind of instantaneous process. It intensified gradually and went to extreme in the sedimentary stage of the Guchengzi formation, and then, it weakened rapidly and stopped soon afterwards; the depression did not take place after the taphrogenesis. On the contrary, it almost happened simultaneously with the taphrogenesis. The depression went at a high speed from the beginning of the sedimentary period of the Xilutian formation, and then weakened gradually in the sedimentary period of the Gengjiajie formation. The evolution course of the synsedimentary structure of the Fushun Basin can be summarized as the following six stages: slow taphrogenesis and high speed depression to accelerated taphrogenesis and high speed depression to high speed taphrogenesis and high speed depression to retarded taphrogenesis and high speed depression to gradual halt of taphrogenesis and reduced depression to slow depression and gradual halt of depression. The tectonic evolution resulted in the formation of the "lower taphrogenesis and upper depression" structure. The formation of the binary structure might be due to the suspension of taphrogenesis and the change of the regional structure stress field, but the depression kept going. The result of calculation combining the analysis of the synsedimentary structural frame, the back-stripping method of the subsidence history of the basin basement and the simulation of thermo-settlement history indicates that the great sedimentary space required by the "upper depression part" consists of two parts, namely, 40% from compaction of sediments and 60% from slow depression of the basin basement during a long period of time. Gradual halt of the depression in the Fushun Basin may be attributed to the reversal of the lithosphere hot-recession and gravity isostasy adjustment which may be the result of new hot-events in the depths and accompanied invasion of extremely thick diabase sill, thus revealing a new forming mechanism of "fault subsidence at the base and depression on the top" structure.     

Use of Chemotaxonomy To Study the Influence of Benzalkonium Chloride on Bacterial Populations in Biodegradation Testing

Contradictory results are reported for the behaviour of quaternary ammonium compounds (QACs) in sewage treatment plants (STPs). QACs may sorb onto activated sludge. Only little information is available with respect to effects of QACs against bacteria in STPs. Only 5 to 15 % of bacteria present in sewage sludge can be detected by means of culture dependent microbiological methods. The shift of the bacterial populations due to effects of test compounds have not been studied up to now with culture independent methods. The microbial populations shift was studied in situ using culture independent chemotaxonomy profiling ubiquinones and polyamines. Additionally, toxic effects of QACs against bacteria present in the test vessels of the Zahn‐Wellens test (OECD 302 B) were assessed with a toxicity control in the test. The ubiquinone profiles representing changes in Gram‐negative populations mainly showed that the activated sludge was affected only in test vessels containing benzalkonium chloride. According to chemotaxonomy Acinetobacter or/and some members of Pseudomonas spp. have been selected by benzalkonium chloride after some adaptation period (8 to 12 days).     

Simulation of individual particle movement in a gravel streambed

A two‐dimensional simulation model of travel distances of individual particles in a gravel‐bed river is presented. The model is based on a number of rules, which include particle size, entrainment, trajectory, distance of movement and entrapment. Particle interactions are controlled by resistance fields defined about each obstacle and critical elevation defined in the model. Resistance fields, particle dropping and critical elevation rules control particle interactions. The interaction rules cause the particles to develop pebble clusters, stone cells and transverse structures (transverse ribs). The simulated travel distances of individual particles are consistent with reported field results. Individual particle travel distances were simulated using two different models; one without interactions between the individual particles and the stationary bed and one with interactions. The case without interactions demonstrates the random nature of sediment transport, and narrow ranges of travel distances. Wider ranges of travel distances, similar to those for natural situations, were obtained for the cases with interactions. The more intense the interaction between the mobile stones and the stationary ones, the wider the range of distances of travel for a given particle size. Modelling the mean travel distance yielded a result similar to that published previously, which was based on empirical data. Well developed bed‐surface structures were obtained for relatively poorly sorted sediment with intense interactions between particles. Transverse structures developed when relatively large particles were allowed to move. Copyright © 2002 John Wiley & Sons, Ltd.