设备树在路灯AM/FM/GIS系统中的应用研究

该文提出了AM／FM／GIS中基于“设备树”的设备设施管理模式，运用“设备树”来组织路灯电力网络中的设备设施对象；阐述了如何从设备设施的物理模型抽象出具有树状层次结构的逻辑网络模型，并根据该逻辑模型设计相应的数据结构来构建“设备树”；并介绍了设备树在南京市路灯AM／FM／GIS系统中的设计与实现。     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Nonlinear Rate Dependent Model of High Damping Rubber Bearing

The accurate analysis of the response of isolated structures requires the application of appropriate models of isolation devices. The purpose of this paper is to analyse a nonlinear strain rate dependent model of a high damping rubber bearing which simulates the horizontal behaviour of the device under specified vertical load using a nonlinear elastic spring-dashpot element. The effectiveness of the model is checked by fitting the experimental data concerning three different rubber bearings. The results of the study show that the model can simulate the bearing behaviour over a wide shear strain range with small simulation errors. This revised version was published online in July 2006 with corrections to the Cover Date.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

Efficiency of base isolation systems in structural seismic protection and energetic assessment

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.     

Comparative study of the inelastic response of base isolated buildings

This article presents a numeric comparative study of the inelastic structural response of base isolated buildings. The comparative study includes the following isolation systems: laminated rubber bearings, New Zealand one, pure friction and the frictional pendulum ones. The study is based on obtaining non‐linear response spectra for various design parameters using six earthquake records. Usually the base isolation of a new building seeks to maintain the structure in the linear elastic range. The response of old weak buildings or the response of new ones subjected to extreme earthquakes may not be, necessarily, in the aforementioned ideal elastic range. Consequently, it is important to characterize the response of isolated buildings responding inelastically. A conclusion from this research is that the isolators affect significantly the structural response of weak systems. Rubber isolators seem slightly less sensitive to plastification that may occur in the structure compared to friction isolators. Ductility demands in the structure are affected significantly by friction and neoprene protected systems, in particular sliding ones where larger demands are obtained. Copyright © 2002 John Wiley & Sons, Ltd.     

三峡库区云阳新城水平层状岩体高边坡变形破坏主要控制因素

本文对三峡库区云阳新城一些高边坡的勘察成果进行了总结,目的在于了解云阳新城区近水平岩层条件下边坡变形破坏的型式、主要控制因素及支护要点。结果表明,云阳新城高边坡普遍存在表层剥落现象,含膨胀性矿物(主要是伊利石和绿泥石)的泥质岩较快速风化作用是造成边坡表层剥落式渐进性破坏的主要原因;沿卸荷裂隙与泥化夹层的崩滑是边坡失稳的主要型式,但边坡之间崩滑失稳的程度存在较大差异,一些边坡存在相对较为强烈的卸荷及边坡失稳问题,主要归因于其存在与边坡近于平行的构造裂隙。认为及时进行护坡并在工程设计中考虑结构面的存在型式是边坡防护的重点。     

新世纪的科技和岩土工程发展

从科技的发展谈论了人才的需求;以三峡工程、青藏铁路、西气东输、南水北调典型工程为例,论述了现代岩土工程与发展;并就21世纪岩土工程研究热点发表了自己的看法。     

比值参数在高密度电法中的应用

探讨了比值参数在高密度电阻率法中的应用；根据工程实例说明比值参数在压制局部干扰和邻近异常分离中有良好效果；将比值参数断面与电阻率反演断面比较研究，能取得较好的异常解释效果。