近海海洋石油平台导管架喷涂金属层防腐

锌、铝及其合金涂层对钢铁的防护，不仅对阴极起保护作用(Gartland，1987)， 对涂层本身也具有良好的抗腐蚀性能。此外，涂层中金属微粒表面形成的致密氧化膜，也起到了防腐蚀的作用。在不同大气环境下，锌、铝有良好的耐蚀性，其腐蚀速率比钢铁要低得多(李言涛，1998)。采用热喷涂锌、铝及其合金涂层对钢铁构件和构筑物进行长效防护早在20世纪20年代就已开始应用，至今仍是普遍采用的防护措施，并在继续发展(李守本等，1989)。20年代初，法国首先用于海水闸门的防腐；40年代美国用于墨西哥湾的海上井架和海上输油管以及舰船的防腐；60年代英、法、德等国海军将这一技术扩大应用到舰船的上部结构和船壳。而金属热喷涂技术在海洋工程中使用非常有限，第一次使用热喷铝涂层防护近海平台的实例是Conoco公司在北海的Murchison结构上的锥形塔，并且已获得了4a良好的使用效能(Fisher et al.，1987；Shaw et al.，1985)。1984年6月，Hutton张力支柱平台(TLP)在北海下水(水深148 m)安装。系链、升降机和锥形塔均采用火焰热喷涂技术喷涂铝涂层进行防护(Tyson，1985)。1992年6月，Hotton平台使用8a后，对升降机绳索进行观察，在飞溅区没有发现腐蚀现象，也没有检测到褐色渗漏效应(Fisher et al.，1995)。     

人工神经网络方法反演东中国海悬移质浓度

海中悬移质是决定海洋光学性质、海洋水质,河口海岸带演变动力过程的重要环境参数。本文利用模拟遥感反射比数据集建立人工神经网络反演悬移质浓度,并利用东中国海现场同步数据对该算法进行验证。     

Damage Detection Methods for Offshore Platforms Based on Wavelet Packet Transform

1 .IntroductionInthe whole service period of the platforms ,some damage is unavoidable due to the corrosion,impact ,fatigue and so on.The damage whould cause the structures’ultimate capacity and safety de-crease .Presently,it is generally acceptedthat the detection of damage involes considerable statisticaluncertainties,thus lot of efforts is made for the damage probalility model ,for example Song and Lu(1996) usedthefuzzy-settheoryto estimatethe humanerrorsthroughthe definitionof inspection…     

High parallelization efficiency in barotropic-mode computation of ocean models based on multi-grid boundary ghost area

In general, barotropic-mode computation requires the largest communication time in ocean models because of its iterative nature, when parallel computation is performed based on regional partitioning. In this study, reduction in the overhead time included in the communication in the parallel computation of the barotropic mode is considered to achieve a high parallelization efficiency of ocean models. We verify that the reduction in the communication frequency based on the multi-grid boundary ghost area reduces the total communication time. We find that this is because the sum of several kinds of overhead time for communication occupies a fairly large part of the total communication time. We discuss the trade-off between the decrease in communication time and the increase in computation time due to increased boundary area in such cases, leading to a determination of a suitable width of the multi-grid boundary that minimizes the total required time. We also discuss the efficiencies of the one- and two-dimensional partitioning of the model domain, when a multi-grid boundary is used. In general, two-dimensional partitioning is more efficient than one-dimensional for large partitioning numbers.     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

基于BP人工神经网络的水体遥感测深方法研究

利用Landsat7ETM＋遥感图像反射率和实测水深值之间的相关性,建立了动量BP人工神经网络水深反演模型,并对长江口南港河段水深进行了反演.结果表明：具有较强非线性映射能力的动量BP神经网络模型能较好地反演出长江口南港河段的水深分布情况;由于受长江口水体高含沙量的影响,模型对小于5 m的水深值反演精度较高,而对大于10 m的水深值反演精度较低.     

Validity of sea surface temperature observed with the TRITON buoy under diurnal heating conditions

In order to investigate the validity of buoy-observed sea surface temperature (SST), we installed special instruments to measure near-surface ocean temperature on the TRITON buoy moored at 2.07°N, 138.06°E from 2 to 13 March 2004, in addition to a standard buoy sensor for the regular SST measurement at 1.5-m depth. Large diurnal SST variations were observed during this period, and the variations of the temperatures at about 0.3-m depth could be approximately simulated by a one-dimensional numerical model. However, there was a notable discrepancy between the buoy-observed 1.5-m-depth SST (SST_1.5m) and the corresponding model-simulated temperature only during the daytime when the diurnal rise was large. The evaluation of the heat balance in the sea surface layer showed that the diurnal rise of the SST_1.5m in these cases could not be accounted for by solar heating alone. We examined the depth of the SST_1.5m sensor and the near-surface temperature observed from a ship near the buoy, and came to the conclusion that the solar heating of the buoy hull and/or a disturbance in the temperature field around the buoy hull would contribute to the excessive diurnal rise of the SST_1.5m observed with the TRITON buoy. However, the temperature around the hull was not sufficiently homogenized, as suggested in a previous paper. For the diurnal rise of the SST_1.5m exceeding 0.5 K, the daytime buoy data became doubtful, through dynamics that remain to be clarified. A simple formula is proposed to correct the unexpected diurnal amplitude of the buoy SST_1.5m.     

Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.     

GIS新引擎——“真图”数据解决方案

提出了一种基于移动测量系统技术的"真图"数据解决方案。一方面极大地丰富了GIS数据源,另一方面通过相应的真图影像数据管理软件及开发包扩展GIS功能,为各行业应用提供了地理信息数据解决方案。     

煤矿区地质环境与地质灾害遥感集成监测系统的关键技术

面向“数字矿山”应用系统的需要,在分析煤矿区地质环境和地质灾害特点及其在遥感监测理论依据的基础上,提出了煤矿区地质环境与地质灾害遥感集成监测系统的技术思路和体系结构,强调各种监测技术手段、不同时空尺度、不同数据源和不同主题信息的集成,并针对这一集成系统实现与应用中的多目标遥感信息处理、环境传感器网络应用、遥感监测数据与专题分析模型的集成、数据质量控制等关键问题进行了探讨。