Mineral Weathering in a Semiarid Mountain River: Its assessment through PHREEQC inverse modeling

By means of PHREEQC inverse modeling, we have simulated the weathering reactions in Los Reartes River, a mountainous (2400–670 m a.s.l.) drainage basin from the Sierras Pampeanas of Córdoba, Argentina, analyzing the effect of lithology, relief, and climate. The steep upper half of the basin (slopes > 20) is occupied by exposed granite; the remaining area is mostly metamorphic, with cropping out gneisses and progressively decreasing slopes (< 6). Climate is semihumid to semiarid; rainfall mainly occurs in summer and decreases with decreasing height. PHREEQC inverse models developed using water chemical data showed that (a) oligoclase was the major supplier of solutes, while the main precipitated phase was kaolinite in the granite domain; (b) muscovite is the chief supplier of solutes and illite is the main precipitated phase in the gneissic realm; (c) the steeper portions of the metamorphic reach are less crucial in supplying solutes than the lower ones, thus highlighting the importance of the water residence time in the kinetics of dissolution; (d) in the driest time of the year (winter, 20 mm/month) we registered the highest production of dissolved and precipitated phases; fluxes (mmol/month), however, are higher at the end of the rainy season; (e) CO₂ consumption is important all along the Los Reartes drainage basin and, in terms of mmol/kg H₂O, the lowermost portion of the basin is the most significant supplier; (f) CO₂ accounts for over 50 of all the species involved in the weathering reactions occurring at the Los Reartes drainage basin.     

Oxyanion Concentrations in Eastern Sierra Nevada Rivers – 3. Boron, Molybdenum, Vanadium, and Tungsten

Water samples were collected from 10 locations along the Truckee River system, 14 locations along the Walker River system, and 12 locations along the Carson River, and analyzed for B, Mo, V, W, Na, Cl, and pH. Boron concentrations ranged from approximately 2 mol/kg in the upper reaches of the Truckee River to almost 1,200 mol/kg in Pyramid Lake. Molybdenum, V, and W had concentrations in the nanomolal range; Mo varied from a low of about 12 nmol/kg to a high of 3,200 nmol/kg (Walker Lake); V ranged from 9 nmol/kg to approximately 470 nmol/kg; and W varied from a low value around 0.8 nmol/kg (West Walker River) to 1,030 nmol/kg. The high concentrations of these oxyanion-forming trace elements in the rivers reflects (1) the relative stability of these oxyanions (e.g., MoO₄ ^2-, HVO₄ ^2-, WO₄ ^2-, B(OH)₃, and/or B(OH)₄ ^-) in the alkaline, well oxygenated river and lake waters, (2) contributions of hydrothermal waters (especially for B), and (3) weathering of rocks/regolith with high concentrations of these elements. In the case of Mo, V, and W, each exhibited relatively conservative behavior in the upper, oxygenated reaches of all three rivers. During the study period the region experienced a prolonged drought such that the lower reaches of each river were typified by no flow or stagnant waters and probably low oxygen and/or anoxic conditions (although not measured). Reductive processes occurring in the low flow to stagnant reaches of each river could have led to removal of Mo, V, and W from solution as coprecipitates with Fe monosulfides, or via sorption to Fe oxides/oxyhydroxides and/or organic matter. Boron, however, exhibited essentially no or minor removal from these rivers, and instead was added to each river via B-rich hydrothermal waters (e.g., Steamboat Creek from Steamboat Hot Springs), or by B-rich groundwaters via base-flow during the extensive drought.     

河渠渗漏量计算方法研究进展

河渠渗漏是水资源利用与水环境保护中重要环节之一,对它进行量化具有重要的实践意义。对国内外各种有关河渠渗漏量计算方法的研究成果进行了系统的总结,分别指出各种方法的适用范围和优缺点,并对如何改进现有方法进行了展望。     

Sources of Cd, Cu, Ni and Zn in Portuguese coastal waters

In order to identify the major sources of trace metals (TM) in the Portuguese coastal waters, 58 surface water samples were collected during September 1988. The area sampled extended from the Tagus Estuary (down to a salinity of 25) to cape Ste Marie on the southern coast of Portugal. Dissolved metal concentrations in the fully marine waters ranged from 30 to 250 pM for Cd, 0.7–15 nM for Cu, 0.9–20 nM for Zn and 1.8–4.5 nM for Ni. Within the Tagus Estuary (salinity 25), concentrations increased to 3400 pM for Cd, 26 nM for Cu, 14 nM for Ni and 230 nM for Zn.The large-scale distribution of these metals is dominated by two strong continental sources, both probably linked to the exploitation of pyrite ores. In the Tagus Estuary, TM enrichments can be mostly attributed to a pyrite roasting plant located on the shore in front of Lisbon. Concerning the south Portuguese shelf waters, several hypotheses are proposed to explain their elevated metal concentrations. We particularly discussed the likely influence of the Tinto/Odiel rivers located 100 km eastward, an influence well known in the shelf waters of the Gulf of Cadiz. These rivers are extremely metal-rich because of acid mine tailings originating from their catchment. Between these two regions, upwelling of relatively metal-poor water largely contributes to the dilution of the continental inputs. Indeed, water exchanges on the shelf linked to the upwelling involve water fluxes 500 times higher than the Tagus River flow, and renew the coastal waters that are thus cleaned from terrestrial contamination. Contrary to many other upwelling systems in non-contaminated areas, the Portuguese upwelling does not act as a source of trace-metal enrichment of the continental margin waters.     

江河源区生态环境范围的探讨

The Tibetan Plateau, as the origin of the Yangtze and Yellow rivers, is the region of climate variation and is very sensitive to climate change in China (Feng etal., 1998). The runoff in the upper reaches of the Yellow River has been decreasing at a rate of 9.8 m3/s per decade due to rapid climate warming in the Tibetan Plateau since the mid- and late 1980s (Zhang etal., 2000). Eco-environmental change is also extremely substantial in the source regions of the Yangtze and Yellow rivers. T…     

河网自动综合中Delaunay三角的应用

在地图数据处理和GIS分析应用中,河网自动综合是制图综合的一个重要组成部分,其中涉及到从双线河向单线河转化的过程及河间距的研究。本文利用Delaunay三角网中的三角形的边连接具有的空间邻近性特点,介绍了用Delaunay三角网结构的骨架线来提取双线河流中轴线及研究河间距量算的方法。     

Using width‐based rating curves from spatially discontinuous satellite imagery to monitor river discharge

Remote estimation of river discharge from river width variations is an intriguing method for gauging rivers without conventional measurements. Entirely cloud‐free imagery of an entire river reach is often rare, but partial coverage is more frequent. Discharge is estimated from spatially discontinuous imagery via construction of multiple width–discharge rating curves within a 62‐km reach of the Tanana River, Alaska. The resulting discharge error is as low as 6.7% root mean squared error. Imagery covering <20% of the study reach can be used. Copyright © 2014 John Wiley & Sons, Ltd.     

Floods in the Southern Alps of New Zealand: the importance of atmospheric rivers

Extremely high precipitation occurs in the Southern Alps of New Zealand, associated with both orographic enhancement and synoptic‐scale weather processes. In this study, we test the hypothesis that atmospheric rivers (ARs) are a key driver of floods in the Southern Alps of New Zealand. Vertically integrated water vapour and horizontal water vapour transport, and atmospheric circulation, are investigated concurrently with major floods on the Waitaki River (a major South Island river). Analysis of the largest eight winter maximum floods between 1979 and 2012 indicates that all are associated with ARs. Geopotential height fields reveal that these ARs are located in slow eastward moving extratropical cyclones, with high pressure to the northeast of New Zealand. The confirmation of ARs as a contributor to Waitaki flooding indicates the need for their further exploration to better understand South Island hydrometeorological extremes. Copyright © 2016 John Wiley & Sons, Ltd.     

Medium‐term fluvial island evolution in a disturbed gravel‐bed river (Piave River,Northeastern Italian Alps)

River islands are defined as discrete areas of woodland vegetation surrounded by either water‐filled channels or exposed gravel. They exhibit some stability and are not submerged during bank‐full flows. The aim of the study is to analyze the dynamics of established, building, and pioneer islands in a 30‐km‐long reach of the gravel‐bed Piave River, which has suffered from intense and multiple human impacts. Plan‐form changes of river features since 1960 were analyzed using aerial photographs, and a LiDAR was used to derive the maximum, minimum and mean elevation of island surfaces, and maximum and mean height of their vegetation. The results suggest that established islands lie at a higher elevation than building and pioneer islands, and have a thicker layer of fine sediments deposited on their surface after big floods. After the exceptional flood in 1966 (RI > 200 years) there was a moderate increase in island numbers and extension, followed by a further increase from 1991, due to a succession of flood events in 1993 and 2002 with RI > 10 years, as well as a change in the human management relating to the control of gravel‐mining activities. The narrowing trend (1960–1999) of the morphological plan form certainly enhanced the chance of islands becoming established and this explains the reduction of the active channel, the increase in established islands and reduction of pioneer islands.     

Chute channels in the Holocene high‐sinuosity river deposits of the Firenze plain,Tuscany, Italy

This paper focuses on Holocene deposits of the Firenze alluvial plain (Northern Apennines, Italy) and deals with the sedimentary features of chute channels draining the down‐river edges of the meander neck formed by 70 to 100 m wide and 1 to 1·5 m deep sinuous channels. Two main types of chute channels have been recognized. Type 1 is represented by 3 to 6 m wide and 0·5 to 1 m deep straight channels filled with mud aggregates overlying a basal gravel lag made of reworked caliches. These channels drained the point bar top during floods, and are thought to have been initiated as small rills when a shallow flow overpassed the downstream side of the point bar. Type 2 channels, 3 to 6 m wide and 1 to 1·5 m deep, are moderately to highly sinuous and filled with well‐stratified sand and gravels sourced from nearby rocky highlands. Type 2 channels were connected to the main river channel also during the base flow stage. The transition from Type 1 to Type 2 channels is documented and is interpreted as the result of the meander cut‐off process. Type 1 chute channels represent the early stage of the cut‐off phase, when a headcut is incised on the down‐river edges of the meander neck. The headcut migrates up‐river across the meander neck during floods, when fast currents shape the chute channels into a straight route. The transition from Type 1 into Type 2 channels is linked to the connection of the up‐river migrating headcut with the main channel and the termination of the cut‐off process. At this stage, the cut‐off channel is drained permanently and receives bedload from the main channel. The progressive shaping of the newly formed channel will convert it into the main channel and lead to the formation of an oxbow lake in the abandoned meander branch. Development of chute channels in the Firenze alluvial plain is thought to have heralded a decrease in sinuosity of the main channels, triggered by a climate‐driven increase in water discharge.