An assessment of field evidence for ‘Byerlee’ friction

Structural analyses of the angles of frictional lock-up for fault sets that have become progressively misoriented, together with field observations from seismology, geomorphology, and borehole stress measurements, suggest that Byerlee friction coefficients (0.6<<0.85) are widely applicable to natural sliding surfaces with displacements of up to a few kilometres in the upper crust, from the surface of the earth to seismogenic depths. Extensional normal faults operating under presumed vertical trajectories of extreme compressive stress provide some of the best evidence for frictional lock-up followed by the initiation of new favorably oriented faults, but similar lock-up phenomena also occur in thrust and strike-slip fault systems.However, extensional detachments which appear to have formed and remained active at very low dips (<15°) lie well outside the dip range of currently active normal faults, requiring stress trajectories that deviate significantly from the vertical and horizontal during their initiation and perhaps also during their continued reactivation. Other conspicuous exceptions to the pattern of frictional lock-up expected from Byerlee friction are major transform structures, such as the San Andreas fault in California, which remain active though oriented at high angles to the maximum principal compression. On the basis of the evidence afforded by the lower displacement faults, the apparent weakness of such structures seems most likely to arise from locally elevated fluid pressure, rather than from the presence of anomalously low-friction material within the fault zones.     

Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.     

等截面单桩抗拔承载性状试验研究

在基坑中对等截面单桩进行了抗拔静载试验，在桩身设置应变式钢筋计，成功测得桩身各截面的应变数据。分析试验所得数据，对试验抗拔桩抗拔系数的取值、侧摩阻力的发挥、混凝土桩身的开裂等进行了探讨，相应给出了抗拔桩的设计建议。     

自重湿陷性黄土地区桩基设计探讨

根据自重湿陷性黄土的特点、《湿陷性黄土地区建筑规范》（GB50025—2004）和《建筑桩基技术规范》（JGJ94—94）中关于桩基设计的对比分析，通过自重湿陷性黄土场地工程实例分析计算，依据负摩擦产生的机理——中性点理论，论述了自重湿陷性黄土场地中桩基设计应考虑中性点，而不应全部计入负摩阻的观点。     

River bank erosion control by soil nailing

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October     

皖中泥质岩工程性质探讨

历来对半胶结泥质岩风化等级划分都带有许多主观性,从而影响提承载力,有的规范要求可不对半胶结岩石进行风化程度划分,但有时要对这些岩石进行工程地质细分,从而准确确定各分层的承载力与摩阻力。统计了合肥、六安、淮南、安庆地区等大量实践资料,用标准贯入击数、重型圆锥触探实验击数等原位测试手段来划分泥质岩风化等级,并对泥质岩的承载力与摩阻力等工程地质性质做出了评价。     

注水煤体应力能 V-f 转化与释放机理研究

文章分析了在煤层注水湿润后煤体弹性能的转化与消耗过程，给出在湿润状态下能量由体变弹性能向形变弹性能转化进而自耗释放的理论模型。指出在坚硬干燥煤体中，注水后在水压力和毛细力的切割作用下，裂隙大量扩展，丰富了自由裂隙，产生更多的裂隙启发(裂隙切口)，使原来近似的刚性煤体变成由裂隙分割的块体组成的组合体或半组合体。裂隙中水的粘滞作用及水分子吸附力使块体问粘性结合、刚度降低、形变增大。煤体形变弹性能自身消耗释放的形式有3种：产生剪应力导致自由裂隙问错动摩擦；强度降低，使裂隙启发被劈裂成自由裂隙；湿润煤体蠕变性增强，产生整体性移动作功。初步给出能量消耗的量化表达式。通过这一理论，能建立煤层注水湿润度与冲击地压灾害发生的更直接的关系，使进一步量化该关系成为可能。从更深层次解释煤层注水防治冲击地压的机理。     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

Study of a semi‐active stiffness damper under various earthquake inputs

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

耗能减震结构的受力分析与层间弹塑性变形简化计算方法

本文研究了安装粘弹性耗能器结构在常遇地震作用下层间最大剪力的分配情况 ,给出了层间最大剪力在结构构件与耗能器之间按刚度分配原则进行假想分配后 ,所得假想层间构件力与层间最大构件力之间的关系 ,以及假想层间附加力与层间最大附加力之间的关系 ,探讨了罕遇地震作用下安装粘弹性耗能器结构与安装软钢耗能器结构的层间弹塑性变形简化计算方法。