A local model for analysis of pump and treat systems with vertical barrier walls

We present a mathematical model of local, steady groundwater flow near a vertical barrier wall. Flow features represented in the model include an impermeable arc-shaped barrier wall and multiple wells; distant boundary conditions are not included explicitly, but their effects on the local flow field are modelled by specifying a uniform flow at infinity and a constant areal recharge within a local domain. We develop an explicit closed-form solution to the boundary-value problem using the analytic element method. The solution is an extension of a harmonic solution presented by Anderson and Mesa [Anderson EI, Mesa E. The effects of vertical barrier walls on the hydraulic control of contaminated groundwater. Adv Water Resourc 2006;29(1):89–98] which does not include the effects of recharge. We demonstrate that the general solution with recharge consists of the harmonic solution superposed on a special case of the harmonic solution along with two elementary one-dimensional flow solutions. The results are used to investigate the effects of areal recharge on the capture zone envelopes of the pumping wells and on the reduction in discharge that can be achieved by including a barrier wall in a pump and treat design. We find that the benefits of including an open barrier wall in a design, measured as a reduction in the pumping rate required to contain a plume, increase for higher recharge rates. Dimensionless plots of capture zone envelopes are presented for a practical well and barrier wall configuration.     

低周反复荷载下Q460钢材框架柱抗震性能分析

为了进一步完善Q460钢材在抗震设计规范中相关限值的要求,本文利用有限元软件ABAQUS,以轴压比、翼缘宽厚比、腹板高厚比和壁板宽厚比为变量,建立了共48根“工”字型框架柱和“箱”型框架柱,分析了其抗震性能。结果表明:翼缘宽厚比对框架柱的能量耗散系数影响较小;能量耗散系数随轴压比、腹板高厚比（“工”字型）和壁板宽厚比（“箱”型）增大而明显减小;框架柱的极限承载力随轴压比的减小及壁板宽厚比和翼缘宽厚比的增大而逐渐增大,当腹板高厚比接近规范限值时,承载力下降趋势明显增大。与采用Q235钢材的框架柱相比,Q460钢材框架柱的延性较小,仅为2左右;当采用Q460钢材时,“工”字型框架柱的极限位移角限值建议取为0.03,“箱”型框架柱的极限位移角限值建议取为0.032。规范中对翼缘宽厚比限值的规定偏于保守,其值最大可取至9。无论是“工”字型框架柱还是“箱”型框架柱,其腹板高厚比均不宜过大。Q460钢材框架柱的刚度退化率随轴压比的增大而增强,且翼缘宽厚比越大,腹板高厚比越小,柱的初始刚度越大,刚度退化程度越明显。     

格型钢板桩结构有限元数值分析

以有限元软件ABAQUS作为分析平台,建立波浪荷载作用下格型钢板桩结构稳定性及应力分析的三维弹塑性有限元分析模型。格型钢板桩采用壳体单元模拟,在相邻板桩之间设置铰接连接器模拟板桩之间的相对转动;土体采用Mohr-Coulomb本构模型模拟,在格型钢板桩与其内、外土体之间设置接触面单元模拟它们之间的滑移、张裂和闭合。结合某实际工程,研究结构的破坏模式、失稳特性和应力分布特性,分析参数变化对结构稳定性和环向拉力的影响,并对格内土体的剪切变形进行分析,建议格型钢板桩锁口拉力的验算断面。结果表明,铰接连接器的设置对于结构稳定性影响不大,但对环向拉力有一定影响;格内土体的剪切变形主要发生在格体中轴处,符合太沙基法结论。     

A constitutive model for mechanical and chemo‐mechanical compaction in sedimentary basins and finite element analysis

Compaction and associated fluid flow are fundamental processes in sedimentary basin deformation. Purely mechanical compaction originates mainly from pore fluid expulsion and rearrangement of solid particles during burial, while chemo‐mechanical compaction results from Intergranular Pressure‐Solution (IPS) and represents a major mechanism of deformation in sedimentary basins during diagenesis. The aim of the present contribution is to provide a comprehensive 3D framework for constitutive and numerical modeling of purely mechanical and chemo‐mechanical compaction in sedimentary basins. Extending the concepts that have been previously proposed for the modeling of purely mechanical compaction in finite poroplasticity, deformation by IPS is addressed herein by means of additional viscoplastic terms in the state equations of the porous material. The finite element model integrates the poroplastic and poroviscoplastic components of deformation at large strains. The corresponding implementation allows for numerical simulation of sediments accretion/erosion periods by progressive activation/deactivation of the gravity forces within a fictitious closed material system. Validation of the numerical approach is assessed by means of comparison with closed‐form solutions derived in the context of a simplified compaction model. The last part of the paper presents the results of numerical basin simulation performed in one dimensional setting, demonstrating the ability of the modeling to capture the main features in elastoplastic and viscoplastic compaction. Copyright © 2016 John Wiley & Sons, Ltd.     

天然状态与饱和状态下的不稳定斜坡危险性对比分析

本文依据北京市房山区史家营乡大村涧村的调查成果,借助于有限元分析软件,建立居住区附近影响范围内的边坡三维工程地质力学模型和弹塑性模型,利用有限差分法分析,对单一矸石堆边坡和矸石-岩土混合型边坡,进行计算分析,对比分析了这两种边坡在天然状态下与饱和状态下的安全系数,最终进行了边坡危险性评价。     

GBW10010a大米标准物质复(研)制及数据特征

随着我国对生态文明建设的重视,自然资源综合调查势在必行,对生物标准物质亦提出了新的需求。当前相关调研工作已经大面积开展,自然资源综合调查、农产品与食品安全评价都需要对生物样品元素组成进行准确测试,需要以生物标准物质作为生物成分测试量值比对和溯源的基础,因此对生物基体标准物质的需求量大幅增加。大米作为主要粮食之一,其食品安全日益受到重视,对大米中的化学成分进行准确的分析测试具有重要的现实意义,因而对大米标准物质的需求量尤为突出,但目前大米成分分析标准物质已供不应求。本文严格按照《标准物质定值的通用原则及统计学原理》（JJF 1343—2012）和《地质分析标准物质的研制》（JJF 1646—2017）等相关规范要求,开展了GBW10010a大米成分分析标准物质的复（研）制工作,包括样品采集、加工制备、均匀性检验、稳定性检验、多家实验室协作定值测试及不确定度评定等关键环节。结果表明：本次复（研）制的大米标准物质定值成分多样、量值准确可靠,符合国家一级标准物质的要求。GBW10010a共定值54项主微量元素,包括Ag、Al、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cs、Cu、Dy、Er、Eu、Fe、Gd、Ge、Hg、Ho、K、La、Li、Ho、Mg、Mn、Mo、N、Na、Nb、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Sc、Se、Si、Sm、Sr、Tb、Th、Tl、Tm、U、V、Y、Yb、Zn,其中的39项元素给出了标准值及不确定度,包括Ag、Al、As、B、Ba、Ca、Cd、Ce、Co、Cs、Cu、Dy、Er、Fe、Hg、K、Li、Mg、Mn、Mo、N、Na、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Se、Si、Sm、Sr、Tb、Tl、Y、Yb、Zn;15项元素提供参考值,包括Be、Bi、Cr、Eu、Gd、Ge、Ho、Ho、La、Nb、Sc、Th、Tm、U、V。与原有GBW10010大米标准物质相比较,GBW10010a中As、Cd、Co、Cr、Cu、Hg、Mn、Mo、Ni、Zn等重金属元素含量显著下降,其中Cd、Cu、Zn降幅较大,分别下降约39%、43%、38.7%,一定程度上反映了农田生态环境的改善。本批标准物质定值元素总数量增加了6项,新增定值元素Ag、Nb（Nb给出参考值）,并且各项元素不确定度范围整体上有所缩小,如Al、Cd、Cu、Fe、K、Mg、Mo、Na、P、Pb、Se、Zn等对生物易有影响的重要元素,表明了地质分析测试方法技术的进步及定值水平的提高。本批标准物质定值元素涵盖了具有生物效应的大部分主微量元素,适用于农业生态环境地球化学调查与评价、生物样品测试、农产品质量与食品安全评价样品测试时的分析仪器校正、分析方法评价和分析质量监控等多个领域。     

Evolution of 3D tectonic stress field and fault movement in North China

IntroductionThe research on stress field interior the Earth is an either relative old or young branch of geoscience. Early in the 20th century, in order to learn the state of inner stress field, a few scholars had used simple ideal model to analyze big scale tectonic conformations and activities according to tide, gravity, rotation and inner thermal materials. So far, lots of problems on the state of the Earth stress field have not been solved completely yet. The origin of stress field, the d…     

Changing grading of soil: effect on critical states

Examples of situations are presented where the grading of a soil changes during its lifetime either by crushing of particles leading to an increase of fine material or by slow transport of fine particles with seepage leading to a decrease of fine material. Such grading changes influence the basic constitutive properties of the soil, in particular properties such as critical states which are dependent on the available range of densities of packing. Discrete element modelling is used to show the dependence of critical state conditions on grading and the way in which the particle assembly seeks out new critical state conditions as the grading changes.     

大型整体式贮煤筒仓基础有限元分析

采用有限元分析了不同土体的弹性本构关系和不同堆煤荷载施加方式对筒仓基础的影响;在此基础上分析了煤压力、桩土之间的接触压力、桩的内力与变形、土体沉降等变化规律。从计算结果可知,考虑土体的弹性模量随土层的压实而提高,并考虑煤与筒仓、基础土体之间的相互作用,使得筒仓基础的受力状态与实际情况更接近,从而得到优化的筒仓基础设计。     

多元素衬值累加地球化学方法在找矿中的应用——以青海省夏日哈-什多龙远景区为例

青海省夏日哈-什多龙成矿远景区位于青藏高原东昆仑东段,西起都兰县夏日哈镇,东至兴海县什多龙一带,跨祁漫塔格北坡-夏日哈岩浆弧和北昆仑岩浆弧,是青海省重要的成矿区。为了在该区寻找新的成矿有利地段,本文在对该区区域地质背景、矿产特征及区内典型矿床地质特征系统研究的基础上,利用多元素衬值累加地球化学找矿方法,在区域上优选出一批找矿靶区。多元素衬值累加地球化学找矿方法首先收集远景区1∶5万水系沉积物测量成果,经过数据处理,绘制远景区衬值累计地球化学图,进而建立典型矿床找矿模式,最终通过对比分析,选出新的找矿靶区。对圈定的找矿靶区进行野外踏勘检查,均发现不同程度的矿化线索,为今后在该区进一步找矿起到了很好的指导作用。通过本次工作,发现了该方法在靶区圈定方面的优势:(1)可快速圈定异常,提高工作效率;(2)编制的地球化学图浓集中心更显著;(3)圈定的找矿靶区找矿成果显著,尤其针对陆相火山岩型多金属矿、斑岩型铜钼矿、矽卡岩型多金属矿找矿成果突出;(4)能直观反映背景变化趋势,有助于评价异常。