用于多频电磁波测井的负阻抗变换式有源接收天线

本文对用负阻抗变换电路同小圆锥螺旋天线相结合,构成的有源接收天线进行了理论分析,并给出了该有源天线稳定工作的条件。结果表明,用该方法设计的有源接收天线具有较宽的频带、较高的灵敏度和较小的尺寸。是多频电磁波测井较理想的接收天线。     

The forward problem of electromagnetic induction: accurate finite-difference approximations for two-dimensional discrete boundaries with arbitrary geometry

We describe finite-difference approximations to the equations of 2-D electromagnetic induction that permit discrete boundaries to have arbitrary geometrical relationships to the nodes. This allows finite-difference modelling with the flexibility normally ascribed to finite-element modelling. Accuracy is demonstrated by comparison with finite-element computations. We also show that related approximations lead to substantially improved accuracy in regions of steep, but not discontinuous, conductivity gradient.     

X射线荧光测井井液的影响与校正

X射线荧光测井中 ,井液位于井下探管与井壁之间 ,它的影响不但表现在对特征X射线的吸收 ,而且表现在对源初级射线和特征 X射线的散射。井液的校正采用硬件与软件相结合的方法 ,在硬件上 ,使含有探测器的部分制成单独的短臂 ,有效地保证了探测窗与井壁的良好接触 ;在软件上 ,提出的双散射峰法和散射峰 -逃逸峰法 ,能够校正 0 - 10 mm厚的井液对 X射线荧光测井结果的影响     

一种分析砂岩沉积相的新方法——测井相分析

本文分析了以地层倾角测井资料为核心的各种测井相标志，提出了应用测井资料进行沉积相分析的方法和步骤，并在塔里木盆地三个油田进行了测井地质相分析。     

X射线荧光测井的井液效应及其校正

本文从Ｘ射线的性质，以及Ｘ射线与物质作用的机理出发，对井液效应进行了研究，并对其影响过程进行模拟。在理想井液模型上，推导出Ｘ射线活度与钻孔参数的数理关系。在此基础上，进一步研究得到了能适应野外多变情况的井液效应校正公式（ＣＢＷＥ）和方法。     

多媒体创作工具Compel的应用

本文介绍了一种多媒体应用的创作工具。利用这种工具可以编辑和组织文字、图象、图表、声音以及视频等多种媒体元素。并通过媒体链接以及超级链接，完成多媒体应用的制作。同时，也介绍了多媒体应用的播放。     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

立方氮化硼的应用与机械加工的技术进步

立方氮化硼内其具有“三高”特性，而成为一种理想的硬磨料得以发展，着重介绍了立方氮化硼磨具和刀具及其推广应用，并阐述其技术的发展对机械加工技术的进步具有重要的意义。     

油田中,高含水期小层剩余油研究

综合利用岩心分析、测井及动态开发资料研究了扶余油田西一、二区北的剩余油分布规律，所研制的油田中、高含水期确定小层剩余油分布图，解决了油田开发中的动态预测小层剩余油分布的难题，并且对１９８２年和１９９２年底的剩余油分布规律作了分析。