Non-equilibrium alcohol flooding model for immiscible phase remediation: 1. Equation development

The equations for a compositional model for simulation of a two-phase, three-component system with inter-phase mass transfer are developed. Emphasis is placed on development of inter-phase mass transfer equations for incorporation of rate-limited inter-phase mass transfer. Due to the nature of the three-component systems considered, a single-film model may be inadequate and a two-film model must be utilized. A two-film model accounts for the simultaneous transfer of components in both directions across phase interfaces. The effect of interaction between components on diffusion is considered using a general form of Fick's Law. A Hand Plot representation of ternary phase behavior is chosen since it allows for straightforward calculation of miscibility of bulk phases under conditions of local non-equilibrium. The developed set of equations form the basis for a numerical model to simulate the enhanced removal of non-aqueous phase liquids (NAPLs) from porous media using single-component alcohol floods.     

利用不同盐度诱导长牡蛎三倍体的研究

采用低盐度(4、6、8、10、12、14、16)和高盐度(40、45、50、55、60、65、70)在40%~50%受精卵出现第一极体时处理10和15min,进行长牡蛎三倍体的诱导。在低盐度诱导三倍体实验中,随着盐度降低,D型幼虫孵化率逐渐降低,处理10和15min的卵裂率差异显著(P0.05),孵化率差异不显著(P0.05)。当盐度为8时,处理受精卵10与15min,三倍体诱导率最高分别可达84.4%和91.0%,两处理组三倍体诱导率差异显著(P0.05)。在高盐度诱导三倍体实验中,随着盐度升高,D型幼虫孵化率逐渐降低,处理10和15min的卵裂率和孵化率均差异显著(P0.05)。当盐度为55时,处理受精卵10min,三倍体诱导率最高为80.3%;当盐度为60时,处理受精卵15min,三倍体诱导率最高为97.1%,两处理组三倍体诱导率差异显著(P0.05)。研究发现,在盐度为8和60条件下,40%~50%的受精卵出现第一极体时,处理15min,长牡蛎三倍体诱导率最高。     

Development of a skill assessment tool for the Korea operational oceanographic system

A standard skill assessment(SA) tool was developed and implemented to evaluate the performance of operational forecast models in the Korea operational oceanographic system.The SA tool provided a robust way to assess model skill in the system by comparing predictions and observations,and involved the computation of multiple skill metrics including correlation and error skills.User-and system-based acceptance criteria of skill metrics were applied to determine whether predictions were acceptable for the system.To achieve this,the tool produced a time series comparison plot,a skill score table,and an advanced summarized diagram to effectively demonstrate the multiple skill scores.Moreover,the SA was conducted to evaluate both atmospheric and hydrodynamic forecast variables.For the atmospheric variables,acceptable error criteria were preferable to acceptable correlation criteria over short timescales,since the mean square error overwhelmed the observation variance.Conversely,for the hydrodynamic variables,acceptable root mean square percentage error(e.g.,p erms) criteria were preferable to acceptable error(e.g.,erms) criteria owing to the spatially variable tidal intensity around the Korean Peninsula.Furthermore,the SA indicated that predetermined acceptance error criteria were appropriate to satisfy a target central frequency(fc) for which errors fell within the specified limits(i.e.,the fc equals 70%).     

Comparison of P- and S-waves velocities estimated from Biot-Gassmann and Kuster-Toksöz models with results obtained from acoustic wavetrains interpretation

Kuster-Toksöz and Biot-Gassmann models for estimating velocities of longitudinal and shear waves on the basis of well-logging data were analysed. P-wave and S-wave velocity models are crucial for interpretation of seismic data. Discussed models enable determination with quite good accuracy, in some cases higher than the acoustic full wavetrains interpretation. Because velocity strongly depends on lithology and saturation of pore space, the selection of parameters of rock matrix, hydrocarbons and formation waters has a strong effect on the quality of velocities estimation.     

基于地震相分析的孔隙度预测

这里主要讨论在地震相分析下的孔隙度预测。其基本原理是：首先对研究区块进行前期常规解释（合成记录、层位追踪、构造及断层解释）,在此基础上利用地震相分析技术,并结合测井及岩芯资料对研究区进行沉积相带划分,将地震信息转化为地质信息;然后根据相带划分结果,对单一相带中的密度、声波速度与孔隙度井资料进行统计,拟合获得相关最好的波阻抗与孔隙度关系公式,这样多个相带就有不同的孔隙度计算公式;最后通过反演得到的波阻抗计算获得孔隙度。由于在横向上加入了地质解释,所以通过这种方法能够有效结合地质规律,提高三维孔隙度预测精度,还能更好地进行孔隙流体预测及储层评价。     

钻探岩心高光谱数据管理与分析系统的构建

钻探岩心编录一直是地质勘探中至关重要的环节,高光谱探测技术的发展为岩心分析提供了一种新的编录技术。为了使获得的岩心资料能永久保存且便于使用和分析,笔者开发了钻探岩心高光谱数据管理与分析系统。通过该系统使用者能方便管理、查看钻探岩心数据,快速提取、分析岩心矿物的光谱特征,为后期矿物的识别奠定了基础。     

气体、泡沫等欠平衡钻井条件下感应测井应用分析

对气体、泡沫等欠平衡钻井条件下测井方式进行阐述,通过不同钻井液电阻率下对感应测井进行数字模拟,发现气体、泡沫等介质对感应测井影响较小。天然气介质和原油介质条件下感应测井现场实验的资料分析说明,感应测井在气体、泡沫等欠平衡钻井条件下可行。     

多功能旋挖钻机长螺旋钻具的研制

通过对长螺旋钻进过程中阻力矩的计算,得出了不同直径和孔深情况下的阻力矩值,依此对长螺旋钻具的强度进行比对,给出了不同口径的长螺旋钻具参数。还介绍了长螺旋钻头的不同结构形式及配套器具,简述了多功能钻机长螺旋钻进施工工艺。     

双翼弧平式长螺旋锚杆成孔钻具工艺技术研究

通过对以往黏性土层锚杆钻具成孔出现的问题分析,查明了常规取芯钻具与短螺旋钻具在水平方向小角度成孔过程中,土体失去了原始均衡应力造成钻孔缩径,使扰土不能及时输出孔外,是产生堵孔塌孔的直接原因.为此研制了长螺旋锚杆成孔钻具,解决了成孔时扰土输出问题,创新的旋板解决了钻孔内壁土颗粒结构松弛问题,并且彻底解决了在黏性土层中锚杆成孔塌堵现象,保证锚杆成孔设计角度,形成一套较为标准的长螺旋锚杆钻具成孔操作规则.     

利用自然γ能谱测井资料确定粘土矿物的含量及其应用

根据粘土矿物含量的图版计算方法,计算了实际井段的粘土矿物含量,分析了高岭石、伊利石和蒙脱石与U、Th、K含量的相关关系,由此分析得到粘土矿物含量与放射性元素含量的多元线性关系,建立了粘土矿物含量计算的回归方程。通过对不同井段以及同一井段不同地层数据建立的回归方程分析,给出了具有代表性的线性回归方程模型。根据一个实际井段粘土矿物的计算,获得粘土矿物含量随深度的变化,其粘土矿物含量计算结果与原测井解释相吻合,同时与岩心分析误差在10%左右。