Application of Line Boundary Technique to 2D Tidal Current Simulation

To deal with the problems concerning the shore boundary,moving boundary and engineeringboundary which are encountered frequently in 2D tidal current simulation by the finite difference method,theconcept of line boundary is introduced and studied here,and then the line boundary technique in common useis proposed in this paper.Analysis of some calculation cases shows that this technique is practical,effective,and simple in 2D tidal current simulation involving different boundaries.     

旋转椭球面上的应变与转动张量表达

以旋转椭球体面上某点为原点建立一个大地坐标单位活动坐标架. 通过平移, 使活动坐标架的原点与以椭球中心为原点的笛卡尔单位标架的原点相重合. 然后再通过两次标架旋转, 使活动坐标架与笛卡尔单位标架完全重合. 本文给出了使两个单位标架相重合的转换关系式, 以及该点位移在两个单位标架中的坐标转换式; 在此基础上, 考虑该点的位移及活动坐标架皆为该点大地坐标的函数, 经复杂推导, 分别给出了该点位移向量的微分在大地坐标系中的分量以及该点分别沿坐标曲线的弧微分表达式, 继而导出了该点的位移梯度矩阵; 最后推导出了椭球坐标系的应变张量与转动张量表达式, 并对转动张量的几何含义进行了较详细的解释, 且采用曲面理论对球面与椭球面的应变张量间的内在关系进行了讨论.      

南海风暴潮对风场和外围海水敏感性研究

为探索来自西北太平洋台风风暴潮与南海局地生成台风风暴潮不同,本研究在假设两种台风气象条件相同情况下,研究随台风而来外围海水所形成增水对南海沿岸的影响。以0814"黑格比"强台风风暴潮为基础,使用ROMS(regional ocean modeling system)模式进行数值模拟并通过设计对比试验方法进行研究,研究发现在台风登陆时引起的增水最大,最大增水出现在台风路径右侧,其中在沿岸区域,外围海水形成增水约占总增水10%,且大约3 h后出现增水回震现象。同时,设计对比试验,研究来自西北太平洋台风风暴潮对台风路径、台风强度、台风移动速度和流入角等气象条件敏感性,并获得与前人一致的结果。     

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

Analytical solutions for Euler–Bernoulli beam on visco‐elastic foundation subjected to moving load

Analytical solutions for the steady‐state response of an infinite beam resting on a visco‐elastic foundation and subjected to a concentrated load moving with a constant velocity are developed in this paper. The beam responses investigated are deflection, bending moment, shear force and contact pressure. The mechanical resistance of the foundation is modeled using two parameters k_s and t_s — k_s accounts for soil resistance due to compressive strains in the soil and t_s accounts for the resistance due to shear strains. Since this model represents the ground behavior more accurately than the Winkler spring model, the developed solutions produce beam responses that are closer to reality than those obtained using the existing solutions for Winkler model. The dynamic beam responses depend on the damping present in the system and on the velocity of the moving load. Based on the study, dynamic amplification curves are developed for beam deflection. Such amplification curves for deflection, bending moment, shear force and contact pressure can be developed for any beam‐foundation system and can be used in design. Copyright © 2012 John Wiley & Sons, Ltd.     

Molecular weight distribution,analytical and spectroscopic characterization of humic fractions sequentially isolated by organic solvents from a brown coal humic acid

A sequential fractionation procedure employing a series of selected mild organic solvents of different polarity has been applied for the isolation of chemically different organic fractions from a brown coal humic acid. Elemental composition, molecular weight distribution, i.r. and electron spin resonance analysis were carried out on the isolated humic fractions. They were characterized by: (a) a low polydispersity, (b) a decreasing aliphatic and increasing aromatic character along the series, (c) very different molecular weight which significantly correlated with E₄/E₆ ratios (particle aggregation and molecular association) and free radical concentrations (chemical and biochemical activity). Significant correlations were found between physico-chemical parameters of the isolated humic fractions, i.e. M_n, M_w, E₄/E₆ ratios, spins/g contents and the dielectric constants of the solvents used. This suggested the efficiency of the applied procedure in isolating chemically different organic fractions from the bulk, original humic acid.     

2D magnetic resonance tomography applied to karstic conduit imaging

Karstic conduits play a crucial role for water supply in many parts of the world. However, the imaging of such targets is generally a difficult task for most geophysical methods. Magnetic Resonance Sounding (MRS) is a geophysical method designed for imaging of water bearing structures. Initially, MRS was developed for characterizing horizontally stratified aquifers. However, when applying a 1D MRS measuring setup to the imaging of 2D–3D targets, the size of which may be much smaller than the loop, the accuracy and the lateral resolution may not be sufficient. We have studied the possibility of simultaneously processing several MRS aligned along a profile to perform a Magnetic Resonance Tomography (MRT). This work emphasizes the gain of resolution for 2D–3D imagery of MRT versus the interpolation of 1D inversion results of MRS along the same profile. Numerical modelling results show that the MRT response is sensitive to the size and location of the 2D target in the subsurface. Sensitivity studies reveal that by using the coincident transmitting/receiving (TX/RX) setup and shifting the loop around the anomaly area, the depth, section and position of a single karstic conduit with a size smaller than the MRS loop size can be resolved. The accuracy of the results depends on the noise level and signal level, the latter parameter being linked to the depth and volume of the karstic conduit and the water content in the limestone matrix. It was shown that when applying MRT to the localization of 2D anomalies such as karstic conduits, the inclination of the geomagnetic field, the orientation of the MRT profile and the angle of crossover of the conduit by the MRT profile must be taken into account. Otherwise additional errors in interpretation should be expected. A 2D inversion scheme was developed and tested. Both numerical and experimental results confirm the efficiency of the developed approach.     

Experimental study of surface texture and resonance mechanism of booming sand

The sound-producing mechanism of booming sand has long been a pending problem in the blown sand physics. Based on the earlier researches, the authors collected some silent sand samples from Teng- ger Desert, Australian Desert, Kuwait Desert, beaches of Hainan Island and Japanese coast as well as the soundless booming sand samples from the Mingsha Mountain in Dunhuang to make washing ex- periments. In the meantime the chemical corrosion experiment of glass micro-spheres, surface coating experiment and SEM examination were also conducted. The experimental results show that the sound production of booming sand seems to have nothing to do with the presence of SiO2 gel on the surface of sand grains and unrelated to the surface chemical composition of sand grains but is related to the resonance cavities formed by porous (pit-like) physical structure resulting from a number of factors such as wind erosion, water erosion, chemical corrosion and SiO2 gel deposition, etc. Its resonance mechanism is similar to that of Hemholz resonance cavity. Under the action of external forces, nu- merous spherical and sand grains with smooth surface and porous surface are set in motion and rub with each other to produce extremely weak vibration sound and then become audible sound by human ears through the magnification of surface cavity resonance. However the booming sands may lose their resonance mechanism and become silent sand due to the damping action caused by the invasion of finer particles such as dust and clay into surface holes of sand grains. Therefore, clearing away fine pollutants on the quartz grain surface is an effective way to make silent sand emit audible sound.