BOC调制信号多径误差分析

针对导航信号的多径误差分析,在多径误差包络曲线分析方法基础上提出了多径误差包络期望分析方法。与包络曲线分析方法相比,包络期望分析方法能够定量分析导航信号多径误差。基于包络期望分析方法,对同码速率的二进制偏移载波(BOC)调制导航信号与二进制相位控键(BPSK)调制导航信号的多径误差进行了对比分析。结果表明,BOC调制导航信号具有更小的典型多径误差。     

DPP100－3型钻机改型设计中的几个问题

讨论了ＤＰＰ１００－３型钻机在改型设计中动力匹配，改换汽车底盘的轴荷分配，改装部分的传动装置布置等，主要以选用ＣＡ１４１Ｓ型汽车底盘的改型设计为例进行说明。     

Acceleration response modification factors for nonstructural components attached to inelastic moment‐resisting frame structures

A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on a variety of stiff and flexible inelastic regular moment‐resisting frame structures with periods from 0.3 to 3.0 s exposed to 40 far‐field ground motions is presented. Peak component acceleration (PCA) demands were quantified based on the floor response spectrum (FRS) method without considering dynamic interaction effects. This study evaluated the main factors that influence the amplification or decrease of FRS values caused by inelasticity in the primary structure in three distinct spectral regions namely long‐period, fundamental‐period, and short‐period region. The amplification or decrease of peak elastic acceleration demands depends on the location of the NSC in the supporting structure, periods of the component and building, damping ratio of the component, and level of inelasticity of the supporting structure. While FRS values at the initial modal periods of the supporting structure are reduced due to inelastic action in the primary structure, the region between the modal periods experiences an increase in PCA demands. A parameter denoted as acceleration response modification factor (R_acc) was proposed to quantify this reduction/increase in PCA demands. Copyright © 2007 John Wiley & Sons, Ltd.     

重质碳酸钙干法超细与改性一体化工艺研究

在气流粉碎机中对重质碳酸钙进行干法超细与改性一体化工艺研究，通过控制改性剂种类，改性剂用量，给料粒度，给料速度，产品活化率达97％，吸油率16．20％，20天吸水率7．01％，白度91．5，粒度（d50)8.0um，碳酸钙的吸水和吸油率的均降低，对超细与改性一体化机理进行了讨论。     

Inelastic spectra for displacement-based seismic design

In recognition of the emergence of displacement-based seismic design as a potentially more rational approach than force-based techniques, this paper addresses derivation of inelastic displacement spectra and associated topics. A well-constrained earthquake strong-motion dataset is used to derive inelastic displacement spectra, displacement reduction factors and ductility–damping relationships. These are in a format amenable for use in design and assessment of structures with a wide range of response characteristics.     

对临汾人工影响天气工作的调研报告

人工增雨防雹是直接为工农业生产服务的公益性事业,有利于促进草木植被生长,可有效地扑救森林、草场火灾,是保护和改善生态环境的重要措施;可以减轻大气污染程度,改善空气质量,有益于人们的身心健康;可以缓解工业、农业和人民生活用水供需矛盾,促进社会经济可持续发展。分析表明,凡是降水量明显偏少的年份,粮食大都减产;年降雨量多的年份,粮食大都增产。这表明,人工增雨消雹对于经济建设和社会发展尤其是对农业生产有着重要的意义。     

Geo-engineering properties of expansive soil treated with xanthan gum biopolymer

ABSTRACT

This paper presents the effectiveness of xanthan gum (XG) biopolymer in stabilising the expansive soil. The XG biopolymer is mixed with expansive soil in different proportions such as 0%, 0.2%, 0.5%, 0.8% and 1.0% by weight of the dry soil mass. The plasticity, compaction, swelling, compressibility, hydraulic conductivity, strength and durability characteristics of the treated and un-treated expansive soil are examined. Results show that the plasticity index of the treated soil mass initially increases but beyond 0.5% biopolymer addition it decreases sharply. The optimum moisture content and maximum dry density of treated soil, found out from light and heavy compaction tests, do not follow any definite trend. It is also found that increasing XG content increases compressibility slightly but, it reduces swelling pressure, differential free swelling value and hydraulic conductivity remarkably. On the other hand, time-dependent compressive strength and resistance to mass loss increases with increasing XG content. Microscopic examination confirms the formation of gel-like linkage, which brings about the modifications in the treated expansive soil.     

Managing Soil Erosion Potential by Integrating Digital Elevation Models with the Southern China＇s Revised Universal Soil Loss Equation——A Case Study for the West Lake Scenic Spots Area of Hangzhou, China

In China, many scenic and tourism areas are suffering from the urbanization that results from physical development of tourism projects, leading to the removal of the vegetative cover, the creation of areas impermeable to water, in-stream modifications, and other problems. In this paper, the risk of soil erosion and its ecological risks in the West Lake Scenic Spots （WLSS） area were quantitatively evaluated by integrating the revised universal soil loss equation （RUSLE） with a digital elevation model （DEM） and geographical information system （GIS） software. The standard RUSLE factors were modified to account for local climatic and topographic characteristics reflected in the DEM maps, and for the soil types and vegetation cover types. An interface was created between the Areinfo software and RUSLE so that the level of soil erosion and its ecological risk in the WLSS area could be mapped immediately once the model factors were defined for the area. The results from an analysis using the Areinfo-RUSLE interface showed that the risk value in 93 % of the expanding western part of the WLSS area was moderate or more severe and the soil erosion risk in this area was thus large compared with that in the rest of the area. This paper mainly aimed to increase the awareness of the soil erosion risk in urbanizing areas and suggest that the local governments should consider the probable ecological risk resulting from soil erosion when enlarging and developing tourism areas.     

基于MICAPS 3核心的人影业务平台设计与开发

文章主要介绍了基于MICAPS 3.2系统框架的人工影响天气业务平台的设计与开发.首先介绍了MICAPS 3.2的主要功能、模块设计特点以及主要的系统接口情况.其次介绍了人工影响天气的工作流程、工作内容以及主要产品并指出不同类型的数据在该系统中的交互方法.最后,针对人影工作特点设计菜单和界面布局,完成系统开发设计,并展示了开发完成后人影业务主要产品的例子.