A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.     

顾及DEM误差自相关的坡度计算模型精度分析

基于DEM的坡度计算,其误差来源于DEM误差、DEM结构和坡度计算模型。在顾及DEM误差自相关的前提下,对四种DEM坡度计算模型进行了分析和评价。研究表明,三阶不带权差分能给出较高的坡度计算精度;在局部窗口中,格网点数量越多,坡度计算越准确;等权比不等权的坡度计算模型更准确;DEM误差自相关结构形式对坡度计算无影响。进一步的理论分析和试验分析还表明：DEM误差自相关性的存在,不仅能够改善地形分析的精度,也能改善DEM自身精度。     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!     

GIS中最佳遍历分析算法与实现

首先介绍了地理信息系统（GIS）网络分析的发展概况;其次在已有GIS最佳遍历分析存在问题的基础上,提出了一种最佳多路遍历分析算法。并在ArcEngine环境下,以某县交通网为例,利用C#.net及ArcEngine二次开发类库实现了其最佳多路灾情巡视路线分析。算法适用范围广,可以推广到很多同类的地理网络问题。     

广州航空邮件处理中心土洞及桩端软土层处理工艺研究

广州航空邮件处理中心位于岩溶发育地区,场区内存在大量土洞、溶洞等不良地质现象。该建筑物拟采用静压桩基础。为保证建筑物及场道安全,须对场区土洞进行处理。结合场地具体情况和施工工期要求,首先对大体积土洞进行泵注细石砼骨料充填处理,以消除地面大面积塌陷的危险,消灭压桩机械施工安全隐患,然后开始进行静压桩基础施工,同时在场地允许区域对中小体积土洞、桩端软土层等分别进行泵注砂浆骨料和袖阀注浆处理．以确保洞体密实和保证桩基承载力。通过对处理工艺、处理范围的比较筛选和对质量控制要点、施工技术要点的分析提炼．达到了施工简便、造价合理、安全高效的目的,并采用骨料取芯检测、土体标贯试验和压缩试验、洞体物探等多种检测手段,完全达到了设计要求,取得了良好的工程效果和经济效益。     

鲁23井“动水位”观测的分析

本文介绍了鲁23井“动水位”观测情况。提出了一个分析有泄流的“动水位”的新方法,即把流量换算成水位,以等效静水位来表示“动水位”与流量。由于把“动水位”与流量用一个量来计算,从而为“动水位”观测定量的、统一的分析研究提供了新的方法。这对提高“动水位”井的监测预报地震能力起一定的作用。 本文还以鲁23井“动水位”观测资料为例,利用新方法进行处理的观测分析结果与理论研究结果是一致的。     

A comparative error analysis of manual versus automated methods of data acquisition for algebraic strain estimation

This paper presents a statistical analysis of the algebraic strain estimation algorithm of Shimamoto and Ikeda [Shimamoto, T., Ikeda, Y., 1976. A simple algebraic method for strain estimation from deformed eillipsoidal objects: 1. Basic theory. Tectonophysics 36, 315–337]. It is argued that the error in their strain estimation procedure can be quantified using an expected discrepancy measure. An analysis of this measure demonstrates that the error is inversely proportional to the number of clasts used. The paper also examines the role of measurement error, in particular that incurred under (i) a moment based and (ii) manual data acquisition methods. Detailed analysis of these two acquisition methods shows that in both cases, the effect of measurement error on the expected discrepancy is small relative to the effect of the sample size (number of objects). Given their relative speed advantage, this result favours the use of automated measurement methods even if they incur more measurement error on individual objects. Validation of these results is carried out by means of a simulation study, as well as by reference to studies appearing in previous literature. The results are also applied to obtain an upper bound on the error of strain estimation for various studies published in the literature on strain analysis.     

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.     

SPOT5影像严格几何纠正方法研究

根据SPOT卫星的成像原理和特点,讨论了对SPOT5卫星影像按共线方程法进行有控制点的几何纠正的方法,经对关中、陕北和陕南三种地形的影像纠正结果进行对比检验,证明了该方法精度达到了较高水平。     

GIS中直线元内插点精度及对误差带的影响

基于误差传播定律，考虑参数r误差影响，推导了线元内插点的精度计算公式，讨论内插点精度对线元误差带的影响，并对影响的结果进行了分析，得到了一些有益的结论。