东天山康古尔金矿床石英位错构造及其动力学意义

康古尔金矿床形成于脆韧性—脆性剪切变形构造演化过程中。应用透射电镜超微技术分析水热成矿期石英位错构造、位错密度及差应力值有助于加深认识剪切构造条件下的成矿动力学机制。石英位错构造特征反映成矿期构造变形环境为中温—中低温、高差异应力、高应变速率。成矿期构造差应力演化呈明显的脉动性,这种脉动性所形成的“应力地震泵吸”机制对金矿成矿至关重要。     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

The use of microstructures for discriminating turbiditic and hemipelagic muds and mudstones

The microstructures of turbiditic and hemipelagic muds and mudstones were investigated using a scanning electron microscope to determine whether there are microstructural features that can differentiate turbiditic from hemipelagic sedimentary processes. Both types of muddy deposits are, in general, characterized by randomly‐oriented clay particles. However, turbiditic muds and mudstones also characteristically contain aggregates of ‘edge‐to‐face’ contacts between clay particles with long‐axis lengths of up to 30 μm. Based on observations of the clay fabric of the experimentally‐formed muds settled from previously agitated muddy fluids, these types of aggregates, hereafter referred to as ‘aggregates of clay particles’, are interpreted as having been formed by the collision of component flocs in turbulent fluids. Furthermore, some aggregates of clay particles have ‘face‐to‐face’ contacts between clay particles; this is similar to face‐to‐face aggregates characteristically developed in fluid‐mud deposits that are commonly recognized only in turbiditic mudstones, indicating the possibility of a final stage of deposition under highly‐dense conditions, such as temporary fluid muds. In conjunction with earlier proposed lithofacies‐based and ichnofacies‐based criteria, aggregates of clay particles should be useful for the differentiation of turbiditic and hemipelagic muddy deposits, particularly with limited volumes of non‐oriented samples from deep‐water successions.     

Kepingophyllidae壁部微细构造及其演化

笔者用高倍光学显微镜和扫描电子显微镜，对Ｋｅｐｉｎｇｏｐｈｙｌｌｉｄａｅ壁部构造进行了详细的研究，从成因上将其划分为两类：泡沫板集聚型和隔壁始端集聚型，并对壁构造化进行了讨论。     

Advective heat transfer and fabric development in a shallow crustal intrusive granite — the case of Proterozoic Vellaturu granite,south India

Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite body emplaced within the greenschist facies Nallamlai rocks.     

Controls on P–T–t deformation path from amphibole zonation during progressive metamorphism of basic rocks (estuary of the River Vilaine, South Brittany, France)

Abstract Edenite/tremolite and edenite/magnesio-hornblende in equilibrium with plagioclase, chlorite, epidote, quartz and vapour involve several types of reactions for which K _D can be related to T and P. Thermodynamic calculation of these equilibria leads to isopleth systems. Given knowledge of the progressive changes of end-member activities in zoned Ca–Mg amphiboles (based on microprobe analyses), it is possible to construct precise pressure–temperature–time paths ( P–T–t paths) which have been followed by metabasites during polyphase metamorphism. When applied to basic rocks from the River Vilaine area, this method allows us to construct a P–T–t path that can be compared directly to the P–T–t path constructed from interbedded acid rocks (aluminous micaschists) in the same structural unit. Through time, both basic and acid rocks underwent the same complex deformation history that can be described conveniently in the L–S fabric system of Flinn. This allows us to construct a P–T–t deformation path for this structural unit.
These paths are interpreted in terms of an under/overthrusting continental collision belt (the Hercynian belt), and represent an illustration of the time delay caused by stacking of more than two crustal units.     

不同剪切作用下水合物钻井液微观结构试验研究

在钻进水合物地层过程中,井壁附近水合物的分解和环空中水合物的分解与再形成,很可能会引起井壁失稳坍塌以及环空堵塞等复杂情况,从而影响钻井的顺利进行。在此过程中,由各组分相互作用形成的钻井液微观结构起到了至关重要的作用。但由于多组分钻井液的微观结构非常复杂,文中仅针对组分简单的水基聚合物钻井液(NaCl、CMC、PVPK90相互组合),考虑钻井液在井底钻头与环空处所受的不同剪切作用(分别为600r/min和6000r/min),结合冷冻干燥方法,利用扫描电子显微镜观测了这两种剪切作用后不同组分的水基聚合物钻井液相应的微观结构。结果表明,聚合物分子以网络骨架结构形式悬浮于钻井液中,一小部分水分子、无机盐离子等被吸附在聚合物骨架结构表面上,大部分水分子、无机盐离子等小分子物质游离于聚合物网络骨架孔隙中;对于环空中含水合物的岩屑,热量主要通过网络骨架结构的热传导与充填其中流体的对流导热而传递至岩屑表面,而后通过热传导进一步向岩屑内部传递;钻井液的微观结构随着剪切作用、浓度与组分的改变而发生变化,这就对上述的传热过程产生影响,进而对钻井液中水合物分解的传热特性产生影响。     

北疆阿巴宫-库尔提断裂带显微组构的运动学和动力学分析

研究了阿尔泰地区NW走向高角度冲断构造中主干的阿巴宫—库尔提断裂带。详细研究了断裂构造岩的变形构造和组构及其所显示的运动学和动力学特征。结果表明:存在早、晚更替且性质不同的变形显微构造。早期以糜棱岩中的韧性变形构造为主,发育有递进变形的不对称构造(压力影、旋转变斑晶、S—C构造等),是断裂中剪切变形运动指向的主要判据。晚期为脆性破裂构造,与早期变形组构具继承、叠加关系。研究了石英光轴的组构形式,证实存在:早期共轴纯剪变形的小圆环带组构和非共轴简单剪切变形中,呈递变关系的点极密—大圆环带—交叉大圆环带组构型式。对变形构造和组构所作的运动学和动力学分析结果表明:阿—库断裂带的形成和变形历史为:①地壳早期NE挤压收缩环境,形成劈理化带;②在持续NE向挤压作用下,大规模剪切、逆冲叠置,和地壳加厚,产生重熔岩浆和流体再分配效应,促使糜棱岩带形成和发展;③晚期地壳NE向挤压下,以垂直差异抬升和大量碎裂岩化高角度逆冲断裂的继承、叠加为特征。在区域大地构造的关系上:①、②对应于地槽褶皱、封闭的地槽体制(海西期),③对应于地洼体制(后海西期)。     

云南会泽HZT 型铅锌矿床蚀变白云岩特征及岩石-地球化学找矿标志

蚀变白云岩是会泽超大型铅锌矿床的赋矿围岩。通过矿区调研和近矿围岩典型剖面精细测量,矿区蚀变中-粗晶白云岩从颜色上可分为4种类型:肉红中粗晶白云岩、米黄色针孔状粗晶白云岩、灰白孔洞状粗晶白云岩、纯白色粗晶白云岩;前三者与矿体产出关系密切,从远矿到近矿依次为:肉红中粗晶白云岩→米黄色针孔状粗晶白云岩→灰白孔洞状粗晶白云岩→铅锌矿石;总结了3个带主要矿物组合、组构特征,认为3个带在白云石重结晶程度、显微构造、黄铁矿、晶洞充填物及裂隙等具明显差异,据此可作为辨识赋矿白云岩的重要标志。同时,对比了摆佐组白云岩(矿化粗晶白云岩、粗晶白云岩、白云石化灰岩)主量元素变化特征,分析了近矿蚀变白云岩主量元素及其比值与矿体距离的相关性,以及CaO与其他主量元素相关性,确定了热液蚀变参数有SiO2、MgO/CaO、K2O/CaO、Al2O3/TFe等,为找矿预测提供理论依据。     

Effects of high-pressure heat treatment on the solid-state phase transformation and microstructures of Cu61.13Zn33.94Al4.93 alloys

The phase transformation activation energy of the Cu_61.13Zn_33.94Al_4.93 alloys, which were treated at 4 GPa and 700 °C for 15 minutes, was calculated by means of differential scanning calorimetry curves obtained at various heating and cooling rates. Then, the effects of high-pressure heat treatments on the solid-state phase transformation and the microstructures of Cu_61.13Zn_33.94Al_4.93 alloys were investigated. The results show that high-pressure heat treatments can refine the grains and can change the preferred orientation from (111) to (200) of α phase. Compared with the as-cast alloy, the sample with high-pressure heat treatment has finer grains, lower β' → β and β → β ' transformation temperature and activation energy. Furthermore, we found that high cooling rate favours the formation of fine needle-like α phase in the range of 5--20 °C/min.