某Cr(Ⅵ)污染场地修复的PRB反应材料及结构设计研究

渗透反应格栅(permeable reactive barrier,PRB)在国外被广泛应用于场地尺度的地下水污染修复,因其无须外源动力、不占地面空间、运行成本低等优势在国内受到广泛关注。不同场地水文地质条件、污染物类型、污染羽分布具有差异性,前期场地调查、反应材料的筛选、反应墙尺寸结构的设计对于PRB的有效运行至关重要。本文以PRB修复河南某Cr(Ⅵ)污染场地为例,详细阐述场地调查、材料筛选、材料反应参数确定、PRB结构优化等方面的研究过程及成果,可为后续PRB修复技术的应用提供参考。研究结果表明:PRB修复技术适用于该场地,铸铁与活性炭混合材料为最佳修复材料;反应门长40 m(反应材料厚2 m,上下游分别为2 m厚砾石层),东西两侧隔水墙长为60 m的U型漏斗-门系统型PRB,可有效捕获并修复污染羽,工程成本远低于连续反应墙式PRB,为该场地修复最优PRB结构类型。     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

Comparing gravity and gravity gradient surveys

Noise levels in marine and airborne full tensor gravity gradiometer surveys together with conventional land, marine and airborne gravity surveys are estimated and analysed in gridded form, resulting in relations that detail how these different survey systems can be compared analytically. After defining survey parameters including line spacing, speed and instrument bandwidth, the relations estimate the noise levels that result on either grids of gravity (gz) or gravity gradient (Gzz) as a function of the spatial filtering often applied during geological interpretation. Such comparisons are believed to be a useful preliminary guide for survey selection and planning.     

高层钢板剪力墙结构底部加强层抗震性能分析

采用非线性有限元软件Msc．Marc对高层钢管混凝土组合框架-钢板剪力墙结构底部四层两跨未加劲薄钢板墙模型进行了推覆分析与滞回分析。计算结果表明,组合钢板剪力墙结构具有良好的延性及稳定的滞回性能,结构进入弹塑性阶段后钢板墙的拉力带方向与CAN／CSA S16—01（2001）推荐公式吻合良好。根据分析结果,比较了不同分析类型及不同钢板墙厚度的影响。研究发现,考虑钢材强化及包辛格效应后,结构滞回分析的极限承载力将小于推覆分析的极限承载力;随着钢板墙厚度的增大,结构的弹塑性屈曲模态由局部屈曲向整体屈曲过渡;在罕遇地震作用下,钢板墙结构的底层边缘约束柱将产生较大的轴拉力,甚至被拉断而导致结构整体破坏。     

Complex site effects and building codes: Making the leap

The engineering community is aware of the importance of site effects, but it lags behind seismological studies when it comes to incorporating site effect considerations in design spectra for seismic norms. This lag is reflected in the conspicuous fact that current building codes make allowance for 1D site effects but ignore complex site effects. The purpose of this paper is to explore a way for including complex site effects in a building code environment. We take as example Eurocode 8, which is a modern code that exemplifies the current approach to site effect consideration. We examine the restrictions that we have imposed to make the problem of a feasible size and discuss the approach we have taken. We propose a strategy to incorporate a class of complex site effects in a design elastic spectrum.     

Seismic design and response evaluation of unbonded post‐tensioned hybrid coupled wall structures

This paper presents an analytical investigation on the seismic design and response of coupled wall structures that use unbonded post‐tensioned steel coupling beams. Both monolithic cast‐in‐place reinforced concrete wall piers and precast concrete wall piers are considered. Steel top and seat angles are used at the coupling beam ends for energy dissipation. The seismic design of prototype structures to achieve target displacement‐based performance objectives is evaluated based on nonlinear static and dynamic time history analyses. Additional recommendations are provided on shear design. Comparisons with ‘conventional’ structures that use embedded steel coupling beams as well as isolated walls with no coupling are provided. The results indicate that while the peak lateral displacements of unbonded post‐tensioned coupled wall structures are larger than the peak displacements of structures with embedded beams, the residual displacements are significantly reduced as a result of the restoring effect of the post‐tensioning steel. Copyright © 2008 John Wiley & Sons, Ltd.     

用于水资源系统观测网空间布局优化设计的技术方法

论述了观测网空间优化设计的重要性和我国目前观测网点布设存在的问题,在综合国内外水资源科学研究状的基础上,介绍了目前用于观测网优化设计的几种技术方法,包括数据理论方法,克里格技术和信息熵方法,特别推荐基于信息熵与随机数学相结合而发展起来的优化设计方法,这种根据观测数据信息含量大小建立信息关系度量的技术手段,特别适合在基础数据不完整的情况下运用。     

均匀设计在室内大型注浆试验研究中的应用

介绍了均匀设计试验方法的特点及优越性，利用试验点在试验范围内的均匀分布，能大大减少试验次数且获得较好的试验效果。将均匀设计方法引入到注浆试验研究中，并对试验进行了详细设计，实践表明，均匀设计试验法是一种有效、可靠的试验设计方法。     

重磁处理解释系统软件设计与关键实现技术

重磁探测是金属矿勘探的主要手段之一,其处理和解释方法技术已得到很大的发展,研发与其相适应的重磁软件是重要的研究课题.在国家863课题的支持下,我们设计并研发了重磁处理解释集成化软件系统.在分析国内外现有软件不足的基础上,我们对重磁软件系统所应具有的操作行为进行了针对性的设计,提出了具有特色的功能设计思路,并进行了针对性的研发实现.为满足深部矿产资源勘探需求和精细化解释需要,提出了更加具有针对性的软件设计解决方案,研发了特色的处理解释模块,核心突出软件的实时可视化和协同交互操作,使软件系统能高效地服务于使用者的目标任务.在优化改进处理、正反演算法的基础上,提出多核并行化方案并实现,提高了软件整体运行速度.最终形成了将数据管理、数据可视化、数据处理及解释有机结合的特色软件系统,为金属矿探测提供了一个高效、有力的工具.

     

Adsorption of Complex Pollutants from Aqueous Solutions by Nanocomposite Materials

In view of water pollutants becoming more complex, both anionic and cationic pollutants need to be removed. The multi‐pollutants simultaneous removal is paid more and more attention. Hence, development composite materials for treatment complex wastewater are the aim of this study. In this research, iron–nickel nanoparticles deposited onto aluminum oxide (α‐Al₂O₃) and carbon nanotubes (CNTs) to form nanocomposite materials Fe–Ni/Al₂O₃ and Fe–Ni/CNTs, respectively, were used as adsorbents. The adsorption capacities of Fe–Ni/Al₂O₃ and Fe–Ni/CNTs for AO7, HSeO, and Pb²⁺ were observed to be 5.46, 8.28, 27.02, and 25.6 mg/g, 15.29 and 17.12 mg/g, separately. The composite materials with negative charges were superior in adsorption of anionic pollutants. Using orthogonal experimental design and analysis of variance to co‐treat dye AO7, HSeO and Pb²⁺ in aqueous solutions, seven testing factors were included: (1) adsorbent types, (2) amount of iron, (3) solution pHs, (4) AO7 concentrations, (5) Pb²⁺ concentrations, (6) HSeO concentrations and (7) reaction time. The experimental results showed that the removal of complex pollutants AO7, HSeO, and Pb²⁺ on Fe–Ni/CNTs could reach up to 90% in the optimal treatment conditions. When using Fe–Ni/CNTs as the adsorbent, the sorption isothermals were well fitted in the Freundlich isotherm, and R² could reach up to 0.98.