南海海盆区莫霍面分布规律及其对深部钻探的意义

钻遇莫霍面是人类一直以来的梦想。深海海底是地球上离莫霍面最近的地方，目前有研究推测南海是世界上莫霍面深度最浅的海域之一，但缺乏足够的直接证据。深反射地震探测可以直接揭示岩石圈的构造形态，是莫霍面探测的重要手段。本文基于长达15000 km的深反射多道地震剖面的解释、处理、制图和分析，结合前人的研究，形成了南海海盆区莫霍面反射特征和空间分布的初步认识。① 南海东部次海盆南部早期经历了较快速扩张，岩浆供应充足，受扩张停止后岩浆活动影响较小，基底平坦，地质构造相对简单，同时洋壳地震速度结构不存在异常，且有较强的广角莫霍面反射波和可识别的地幔顶部折射波，具备莫霍面钻探的基本条件。② 南海海盆不同区域的莫霍面反射强度存在较大差异。其中东部次海盆莫霍面反射最为强烈且清晰，西北次海盆次之，西南次海盆仅有零星出现的清晰莫霍面反射且可信度不高。③ 识别南海海盆区莫霍面地震反射长度超过3500 km，首次形成了海盆区深度域莫霍面地震反射空间分布图。与重力反演的莫霍面深度相比，利用深反射多道地震计算的莫霍面深度细节更为丰富，并且可以在垂向上清晰刻画莫霍面的结构。整体上，南海海盆区莫霍面地震反射强烈和可信度高的区域中，深度较浅的区域之一是东部次海盆南部，最浅处仅约9. 5 km，其中水深4. 01 km，洋壳厚度仅5. 54 km。综合判断，东部次海盆南部是南海重要的莫霍面钻探备选区，这对南海莫霍面钻探选址具有重要意义。     

含煤层地质环境下地震波场的数值模拟

本文对含低速煤层地质环境下弹性波场多波多分量地震资料进行了二维数值模拟研究,对人工边界反射进行了有效处理,频散效应得到了有效的压制,对几种不同激发与观测排列方式下的弹性波资料进行了模型计算与分析。     

Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.     

Transmission and reflection of Rayleigh waves at a thin low velocity vertical layer: A laboratory and theoretical study

A three-dimensional ultrasonic modelling was used to study the Rayleigh waves reflected from a thin low velocity vertical layer and those transmitted through the same zone. The reflection and transmission coefficients of the Rayleigh waves have been calculated by an approximate method based on the Green function technique. Nonrigid contact boundary conditions were used for the low velocity layer modelling. A rather good correspondence between the theoretical and experimental absolute values of the reflection and the transmission coefficients was obtained. Some discrepancies between experimental and theoretical results, in particular with regard to phase shifts, may be explained by a certain inadequacy of the theoretical model to the low velocity layer investigated by the ultrasonic modelling.     

Airborne gamma-ray spectrometry to quantify chemical erosion processes

Airborne gamma-ray spectrometry data (uranium, potassium and thorium contents) reveal geochemical heterogeneities within the monolithological Hyrôme watershed (ca. 150 km²) in the Armorican massif (western France). Our observations and computations provide important constraints on the spatial distribution and the associated magnitudes of chemical erosion processes at the scale of a small watershed. Two distinct, partially preserved, weathering profiles exhibit a strong correlation between regolith evolution and airborne-derived K/Th ratios, suggesting that the variability is linked to supergene processes. Using both airborne data and laboratory measurements on rock samples, the total net export of potassium has been estimated at 422 ± 50 kg/m² and the chemical weathering rate of potassium at 17 ± 2 kg/km²/a.     

Continuous air rate measurement in flotation cells: Some fundamental considerations

A robust and reliable sensor to measure gas (air) superficial velocity (J_g) continuously in flotation systems is introduced. It is based on the sampling of bubbles by buoyancy with the accumulating air allowed to exit through an orifice. At steady state, pressure drop is measured and related to the J_g by prior calibration. The continuous device is readily automated and extended to a multi-unit set-up. The sensor and data collections are described. The governing gas flow equation and models of the dynamic response to air flow rate set point change and fluctuations in froth depth are derived. Model predictions are confirmed against plant data. By taking a moving average, the J_g remains valid in the face of typical plant disturbances.     

Mais comment s'écoule donc un glacier ? Aperçu historique

Ice and snow have often helped physicists understand the world. On the contrary it has taken them a very long time to understand the flow of the glaciers. Naturalists only began to take an interest in glaciers at the beginning of the 19th century during the last phase of glacier advances. When the glacier flow from the upslope direction became obvious, it was then necessary to understand how it flowed. It was only in 1840, the year of the Antarctica ice sheet discovery by Dumont d'Urville, that two books laid the basis for the future field of glaciology: one by Agassiz on the ice age and glaciers, the other one by canon Rendu on glacier theory. During the 19th century, ice flow theories, adopted by most of the leading scientists, were based on melting/refreezing processes. Even though the word ‘fluid’ was first used in 1773 to describe ice, more the 130 years would have to go by before the laws of fluid mechanics were applied to ice. Even now, the parameter of Glen's law, which is used by glaciologists to model ice deformation, can take a very wide range of values, so that no unique ice flow law has yet been defined. To cite this article: F. Rémy, L. Testut, C. R. Geoscience 338 (2006).     

Damage Survey of Water Supply Systems and Fragility Curve of PVC Water Pipelines in the Chi–Chi Taiwan Earthquake

Substantial damage to water supply systems, including water delivery pipelines, water treatment plants, reservoirs, and water storage tanks, was reported after the 1999 Chi–Chi Taiwan Earthquake. This paper first summarizes the damage survey and then presents the results of seismic fragility analysis for underground pipelines. Construction blueprints of the water delivery pipelines and repair work orders of 11 townships and cities in the disastrous area were digitized into a Geographical Information System (GIS) for analysis and assessment. With the aid of the GIS system, we found that PVC pipes made up 86% of water delivery pipelines while steel, cast iron, ductile iron, PE and others took the rest. Therefore, this paper focuses on the fragility analysis of PVC pipes. Three different methods were applied to derive the fragility relations between the PVC water pipes having nominal diameters (approximately inner diameters) greater than or equal to 65 mm and earthquake intensity parameters such as peak ground acceleration and peak ground velocity. The results were then examined with those of other countries. The discrepancy between our results and the empirical equation used by HAZUS, an earthquake loss estimation software developed by the Federal Emergency Management Agency was not significant.     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.