冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

CFG桩复合地基褥垫层的合理厚度确定方法研究

在CFG桩复合地基设计中，褥垫层的厚度设计是一个重点，它是复合地基承载力能否全部发挥的关键因素之一。但其设计上基本是靠经验取值，缺少理论根据。从理论方面入手，推导了褥垫层厚度的理论计算方法，给出了最佳垫层厚度、桩土应力比的解析表达式。     

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.     

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.     

A greenhouse study on root dynamics of cactus pears, Opuntia ficus-indica and O. robusta

Over the last 10 years a great interest in spineless cactus pear was shown in the drier areas in terms of both fresh fruit and fodder production. However, there is a lack of knowledge on quantitative data on root dynamics of these plants needed to fully understand its potential under water limiting conditions. This study aimed at quantifying the effects of water stress on the growth of tap roots, side roots and rain roots of the species Opuntia ficus-indica (L.) Miller (cultivar Morado—green cladode) and O. robusta Wendl. (cultivar Monterey—blue cladode). One-year-old cladodes were planted in root boxes and pots (2002/2003 season) that were kept in the greenhouse at day/night temperatures of 25–30 °C/15–18 °C. Placing the cladodes flat on the soil, more areoles came in contact with the soil and therefore more roots developed in both species with an average of only 3.4% areole complexes not rooting. Each areole complex formed on average 3 roots. The highest daily tap root growth was 42 and 36 mm for O. ficus-indica and O. robusta, respectively. Tap root growth increased in the morning with water stress for both species but decreased in the afternoon. Side root growth increased with water stress, with that of O. robusta more per tap root than O. ficus-indica. O. robusta showed a finer root system than O. ficus-indica. The side roots grew as much as 8 and 5 mm per day for O. ficus-indica and O. robusta, respectively. Whitish rain roots developed on the established roots within the first hour after rewetting the soil and grew for only 3 days. Rain roots grew up to 7 and 5 mm within a day for O. ficus-indica and O. robusta, respectively. Considering all studied aspects of their roots systems, O. robusta appears to be better adapted to drought (less sensitive to water stress) than O. ficus-indica.     

Traction image method for irregular free surface boundaries in finite difference seismic wave simulation

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.     

图像平滑算法比较研究及改进策略

图像平滑作为去除图像中含有噪声的图像增强处理技术，是各种与图像有关软件中必不可少的功能模块。文中在分析噪声模型的基础上，对均值平滑、中值平滑、边缘保持平滑等技术从图像处理空间域中的算法原理、实现方法及效率等方面进行了详细比较。针对图像中含有的不同噪声模型，通过多次试验，得出了值得从事图像处理研究者参考的结论。这将有助于提高图像处理软件开发的效率。     

隧道锚杆锚固质量无损检测技术

采用声波检测仪,应用声频应力波在不同波阻抗面反射的能量和相位的变化原理,对隧道的锚杆锚固质量进行了无损检测试验研究,并对检测技术进行了探讨.结果表明,作为一种工程质量管理辅助手段,采用应力波对锚杆锚固质量进行无损检测,丰富了隧道围岩锚固质量检测方法,为隧道工程建设提供更好的质量保障.