Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.     

应用GPS观测青藏高原东北缘应力场变化

采用各向同性弹性地球模型推导了地面位移场速率与地壳内任意点应力场变化的边界积分关系,同时利用青藏高原东北缘1999～2001年观测的GPS资料对观测区地壳深度为5 km和25 km的主应力和最大剪应力进行了计算分析.结果表明,青藏高原东北缘的主应力变化主要集中在祁连山断裂、海原断裂等,在1920～1954年间历史上发生过多次震级为7.0～8.5级强震的断裂附近,并具有主应力变化沿断层走向分布、最大剪应力沿断层走向交替变化等特征.     

HD 82943行星系统的2:1共振与稳定性

用直接数值积分方法通过模拟不同的行星构型探讨了HD82943行星系统(由两颗共振的巨行星组成)的长期动力演化,同时,还研究了在相空间的轨道运动.在对系统长达107年数值积分中,发现所有的稳定轨道均与2:1共振相关联.典型地,在相同的时标内,两个共振幅角θ1和θ2同时(或其中之一)存在秤动.由于共振幅角在一定范围内的秤动,因而使两颗行星轨道半长径被约束而表现为规则运动模式.另外,利用分析模型(包含了外行星偏心率e2的因素),还讨论了对于不同取值的e2和相对近星点经度θ时,内行星在相空间的运动,并发现2:1轨道共振对于相对较小的e2以及当θ=0°时易于保持.此外,适中的e2将导致系统的两颗行星进入深度共振状态.再者,分析模型和数值计算的结果吻合得很好,两者都揭示了行星系统的2:1共振结构.     

Microboudin structures of piemontite along the Sambagawa metamorphic belt, Japan: implications for lateral variation of differential stress during regional metamorphism

Evidence is presented of a lateral variation in differential stress during metamorphism along a regional metamorphic belt on the basis of the proportion of microboudinaged piemontite grains (p) in a quartz matrix in metacherts. It is proposed that p is a practical indicator of relative differential stress. Analysis of 123 metacherts from the 800 km long Sambagawa metamorphic belt, Japan, reveals that p‐values range from < 0.01 to 0.7 in this region. Most samples from Wakayama in the mid‐belt area have p‐values of 0.4–0.6, whereas those from western Shikoku have p‐values of < 0.1. This difference cannot be explained by variations in metamorphic temperature, and is instead attributed to a regional, lateral variation in differential stress during metamorphism.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

Minor planet short periodic perturbations: The indirect part of the disturbing function

Leverrier's development of the indirect part of the disturbing function has been extended to include terms up to degree 4 in eccentricity and inclination; the resulting series has been expressed with respect to a fixed plane, and in a computer readable form (a list of integers). Tests have been performed for the relative significance of the terms of degrees 2, 3 and 4, and estimates have been obtained for the accuracy of the short periodic perturbations of a minor planet, and of the corresponding mean orbital elements. It was found that: (i) even in extreme cases, the indirect part of the disturbing function gives rise to very small short periodic perturbations; (ii) bodies of very high eccentricity/inclination and those close to mean motion resonances are most significantly affected; (iii) indirect perturbations for minor planets can be computed up to the degree 2 terms only, without any significant loss of accuracy; and (iv) higher degree indirect perturbations appear to be important only for their contribution to the long periodic effects of higher order (with respect to the perturbing mass).     

Application of stress release models to historical earthquakes from North China

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.     

Focal mechanism inversion in the Giudicarie–Lessini seismotectonic region (Southern Alps, Italy): Insights on tectonic stress and strain

A set of 41 focal mechanisms (1989–2006) from P-wave first polarities is computed from relocated seismic events in the Giudicarie–Lessini region (Southern Alps). Estimated hypocentral depths vary from 3.1 to 20.8 km, for duration magnitudes (M_D) in the range 2.7–5.1. Stress and strain inversions are performed for two seismotectonic zones, namely G (Giudicarie) and L (Lessini). This subdivision is supported by geological evidence, seismicity distribution, and focal mechanism types. The available number of data (16 in G, 22 in L) does not make possible any further subdivisions. Seismotectonic zones G and L are undergoing different kinematic regimes: thrust with strike-slip component in G, and strike-slip in L. Principal stress and strain axes in each sub-region show similar orientations. The direction of maximum horizontal compressive stress is roughly perpendicular to the thrust fronts along the Giudicarie Belt in zone G, and compatible with right-lateral strike-slip reactivation of the faults belonging to the Schio-Vicenza system in zone L. On the whole, kinematic regimes and horizontal stress orientations show a good fit with other stress data from focal mechanisms and breakouts and with geodetic strain rate axes.