Fragility analysis of low‐rise masonry in‐filled reinforced concrete buildings by a coefficient‐based spectral acceleration method

This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd.     

带竖向构造钢筋再生混凝土砖结构振动台试验研究

提出了带竖向构造钢筋再生混凝土砖砌体结构,进行了2个两层再生混凝土砖砌体房屋结构1/2缩尺模型的模拟地震振动台试验研究,2个结构模型的墙体厚度均为120 mm,一层设有门洞和窗洞,二层设有窗洞。2个模型中,1个为带竖向构造钢筋再生混凝土砖砌体房屋,1个为普通无竖向构造钢筋再生混凝土砖砌体房屋。试验中输入El Centro地震动,测试分析了台面加速度反应、一层和二层顶板加速度反应、结构层间位移反应以及各阶段结构损伤与破坏特征等。研究表明:带竖向构造钢筋再生混凝土砖砌体房屋比普通再生混凝土砖砌体房屋的破坏程度轻,墙体裂缝位置相对错动小,抗震性能显著提高;带竖向构造钢筋再生混凝土砖砌体房屋可用于地震区村镇建筑。     

海南农村民居抗震性能调查与研究

海南农村民居以砌体结构为主,具有门窗开口大、层高较高和整体性强等特点.为了研究分析这类民居的抗震性能与抗震对策,在收集大量当地农村民居样本的基础上,综合出典型结构模型,并对该典型模型及基于该模型的隔震模型和加强结构模型分别进行了模拟地震振动台试验.试验结果表明:隔震技术能明显降低结构地震反应,在高烈度地区应适当推广和运用.原结构模型基本满足7.5度设防标准.在8度大震作用下,结构遭遇严重破坏但未倒塌,说明其具有一定的抗倒塌能力.结构加固后,整体抗震性能得到了加强.结合试验结果,给出了相应对策与建议.     

Performance of masonry enclosure walls: lessons learned from recent earthquakes

This paper discusses the issue of performance requirements and construction criteria for masonry enclosure and infill walls.Vertical building enclosures in European countries are very often constituted by non-load-bearing masonry walls, using horizontally perforated clay bricks.These walls are generally supported and confined by a reinforced concrete frame structure of columns and beams/slabs.Since these walls are commonly considered to be nonstructural elements and their influence on the structural response is ignored,their consideration in the design of structures as well as their connection to the adjacent structural elements is frequently negligent or insufficiently detailed.As a consequence,nonstructural elements,as for wall enclosures,are relatively sensitive to drift and acceleration demands when buildings are subjected to seismic actions. Many international standards and technical documents stress the need for design acceptability criteria for nonstructural elements,however they do not specifically indicate how to prevent collapse and severe cracking,and how to enhance the overall stability in the case of moderate to high seismic loading.Furthermore,a review of appropriate measures to improve enclosure wall performance and both in-plane and out-of-plane integrity under seismic actions is addressed.     

混凝土板墙加固后墙片与剪力墙性能的对比研究

首先通过3个墙片的水平低周反复伪动力试验,对比研究了混凝土板墙加固后墙片与剪力墙的承载力、耗能能力等各项抗震性能。由于试验条件的限制,试验仅对比研究了120mm混凝土剪力墙与双面60mm混凝土板墙加固后墙片的抗震性能。在试验基础上,利用有限元软件建立合理的计算模型,将计算结果与试验结果进行了对比分析;利用该计算模型模拟了用不同厚度的混凝土板墙加固墙片和混凝土剪力墙,系统分析了混凝土板墙加固后墙片与剪力墙的极限承载力,分析了将加固后墙片看作抗震墙的可行性。通过有限元的分析,弥补了试件不足的缺陷,完善了研究方法。     

Method of deformation analysis for composite structures of soils and masonry stones

The coupled numerical manifold method (NMM) and discontinuous deformation analysis (DDA) are enhanced to simulate deformations of continuous soil and discontinuous masonry structures. An elasto-plastic NMM-DDA is formulated that incorporates elasto-plastic constitutive laws into incremental forms of the equation of motion. A node-based uniform strain element is applied to avoid volumetric locking, which often occurs in conventional NMM-DDA. The proposed method is applied to three fundamental boundary value problems: a beam bending problem, a bearing capacity problem of a footing, and a bearing capacity problem of a masonry structure. The method is verified through comparisons with conventional solutions.     

Seismic performance of an unreinforced masonry building: An experimental investigation

This paper presents the results of an experimental investigation carried out to investigate the seismic performance of a two storey brick masonry house with one room in each floor. A half‐scale building constructed using single wythe clay brick masonry laid in cement sand mortar and a conventional timber floor and timber roof clad with clay tiles was tested under earthquake ground motions on a shaking table, first in the longitudinal direction and then in the transverse direction. In each direction, the building was subjected to different ground motions with gradually increasing intensity. Dynamic properties of the system were assessed through white‐noise tests after each ground motion. The building suffered increasing levels of damage as the excitations became more severe. The damage ranged from cracking to global/local rocking of different piers and partial out‐of‐plane failure of the walls. Nevertheless, the building did not collapse under base excitations with peak ground acceleration up to 0.8g. General behaviour of the tested building model during the tests is discussed, and fragility curves are developed for unreinforced masonry buildings based on the experimental results. Copyright © 2009 John Wiley & Sons, Ltd.     

枣庄市国土资源局山亭分局扎实开展民主评议政风行风工作

民主评议政风行风是促进单位部门转变职能、提高效率、优化服务的重要举措。山亭国土资源分局以民主评议政风行风为契机,通过"五个结合",实现了服务质量和工作效率的"三个转变",得到了社会各界的好评。     

In‐plane and out‐of‐plane behavior of confined masonry walls for various toothing and openings details and prediction of their strength and stiffness

Eight half‐scale brick masonry walls were tested to study two important aspects of confined masonry (CM) walls related to its seismic behavior under in‐plane and out‐of‐plane loads. Four solid wall specimens tested to investigate the role of type of interface between the masonry and tie‐columns, such as toothing varying from none to every course. The other four specimens with openings were tested to study the effectiveness of various strengthening options around opening to mitigate their negative influence. In the set of four walls, one wall was infilled frame while the other three were CM walls of different configurations. The experimental results were further used to determine the accuracy of various existing models in predicting the in‐plane response quantities of CM walls. Confined masonry walls maintained structural integrity even when severely damaged and performed much better than infill frames. No significant effect of toothing details was noticed although toothing at every brick course was preferred for better post‐peak response. For perforated walls, provision of vertical elements along with continuous horizontal bands around openings was more effective in improving the overall response. Several empirical and semi‐empirical equations are available to estimate the lateral strength and stiffness of CM walls, but those including the contribution of longitudinal reinforcement in tie‐columns provided better predictions. The available equations along with reduction factors proposed for infills could not provide good estimates of strength and stiffness for perforated CM walls. However, recently proposed relations correlating strength/stiffness with the degree of confinement provided reasonable predictions for all wall specimens. Copyright © 2016 John Wiley & Sons, Ltd.