SHORT COMMUNICATION­­A field experiment of cusp formation on a coarse clastic beach using a suspended video‐camera system

Cusp formation was continuously monitored on a manually flattened, plane section of a coarse clastic, microtidal, pocket beach on the Pacific coast of Japan using a CCD camera suspended in the air. Vertical video pictures enabled the examination of the temporal change in foreshore morphologies and swash pattern. Boulders on the beach face appeared to have triggered the formation of beach cusps, which gradually and successively grew up alongshore. In 2·5 h, two well defined beach cusps had developed with a spacing of 2·2 and 2·5 m, respectively. Copyright © 2000 John Wiley & Sons, Ltd.     

Effect of viscous,viscoplastic and friction damping on the response of seismic isolated structures

In this paper the efficiency of various dissipative mechanisms to protect structures from pulse‐type and near‐source ground motions is examined. Physically realizable cycloidal pulses are introduced, and their resemblance to recorded near‐source ground motions is illustrated. The study uncovers the coherent component of some near‐source acceleration records, and the shaking potential of these records is examined. It is found that the response of structures with relatively low isolation periods is substantially affected by the high‐frequency fluctuations that override the long duration pulse. Therefore, the concept of seismic isolation is beneficial even for motions that contain a long duration pulse which generates most of the unusually large recorded displacements and velocities. Dissipation forces of the plastic (friction) type are very efficient in reducing displacement demands although occasionally they are responsible for substantial permanent displacements. It is found that the benefits by hysteretic dissipation are nearly indifferent to the level of the yield displacement of the hysteretic mechanism and that they depend primarily on the level of the plastic (friction) force. The study concludes that a combination of relatively low friction and viscous forces is attractive since base displacements are substantially reduced without appreciably increasing base shears and superstructure accelerations. Copyright © 2000 John Wiley & Sons, Ltd.     

Compensation of time‐delay for control of civil engineering structures

Time‐delay is an important issue in structural control. Applications of unsynchronized control forces due to time‐delay may result in a degradation of the control performance and it may even render the controlled structures to be unstable. In this paper, a state‐of‐the‐art review for available methods of time‐delay compensation is presented. Then, five methods for the compensation of fixed time‐delay are presented and investigated for active control of civil engineering structures. These include the recursive response method, state‐augmented compensation method, controllability based stabilization method, the Smith predictor method and the Pade approximation method, all are applicable to any control algorithm to be used for controlled design. Numerical simulations have been conducted for MDOF building models equipped with an active control system to demonstrate the stability and control performance of these time‐delay compensation methods. Finally, the stability and performance of the phase shift method, that is well‐known in civil engineering applications, have also been critically evaluated through numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.     

Vibration of vertical rectangular plate in contact with water on one side

In this paper, the vibratory characteristics of a rectangular plate in contact with water on one side are studied. The elastic plate is considered to be a part of a vertical rectangular rigid wall in contact with water, the edges of which are elastically restrained and parallel to those of the rigid wall. The location and size of the plate on the rigid wall may vary arbitrarily. The water with a free surface is in a rectangular domain infinite in the length direction. The effects of free surface waves, compressibility of the water and the hydrostatic water pressure are neglected in the analysis. An analytical‐Ritz method is developed to analyse the interaction of the plate–water system. First of all, by using the method of separation of variables and the method of Fourier series expansion, the exact expression of the motion of water is derived in the form of integral equations including the dynamic deformation of the plate. Then the Rayleigh–Ritz approach is used to derive the eigenfrequency equation of the system via the variational principle of energy. By selecting beam vibrating functions as the admissible functions of the plate, the added virtual mass incremental (AVMI) matrices for plate vibration are obtained. The convergency studies are carried out. The effects of some parameters such as the depth and width of water, the support stiffnesses, location and aspect ratio of the plate and the plate–water size and density ratios on the eigenfrequencies of the plate–water system are investigated. Several numerical examples are given. The validity of AVMI factor approach is also confirmed by comparing the AVMI factor solutions with the analytical‐Ritz solutions. The results show that the approach presented here can also be used as excellent approximate solutions for rectangular plates in contact with water of infinite width and/or infinite depth. Copyright © 2000 John Wiley & Sons, Ltd.     

FEM validation of a double porosity elastic model for consolidation of structurally complex clayey soils

Laboratory consolidation of structured clayey soils is analysed in this paper. The research is carried out by two different methods. The first one treats the soil as an isotropic homogeneous equivalent Double Porosity (DP) medium. The second method rests on the extensive application of the Finite Element Method (FEM) to combinations of different soils, composing 2D or fully 3D ordered structured media that schematically discretize the complex material. Two reference problems, representing typical situations of 1D laboratory consolidation of structured soils, are considered. For each problem, solution is obtained through integration of the equations governing the consolidation of the DP medium as well as via FEM applied to the ordered schemes composed of different materials. The presence of conventional experimental devices to ensure the drainage of the sample is taken into account through appropriate boundary conditions. Comparison of FEM results with theoretical results clearly points out the ability of the DP model to represent consolidation processes of structurally complex soils. Limits of applicability of the DP model may arise when the rate of fluid exchange between the two porous systems is represented through oversimplified relations. Results of computations, obtained having assigned reasonable values to the meso‐structural and to the experimental apparatus parameters, point out that a partially efficient drainage apparatus strongly influences the distribution along the sample and the time evolution of the interstitial water pressure acting in both systems of pores. Data of consolidation tests in a Rowe's cell on samples of artificially fissured clays reported in the literature are compared with the analytical and numerical results showing a significant agreement. Copyright © 2000 John Wiley & Sons, Ltd.     

Visual characterization technique for gravel‐cobble river bed surface sediments; validation and environmental applications Contribution to the programme of CIRSA (Centre Interuniversitaire de Recherche sur le Saumon Atlantique)

This paper presents an evaluation of the feasibility and the reliability of a visual characterization technique for gravel–cobble river bed surface substrate. Based on principal axis regressions, using phi scale (ϕ), comparisons of visual estimation and grid sampling techniques show that useful predictive relations (R² = 0·78–0·88) exist between visual estimates of the surface d₁₆, d₅₀ and d₈₄ and estimates obtained for the same percentiles with the grid sampling technique. Comparisons of visual estimation and the surface‐bulk sampling technique also indicate a predictive relation (R² = 0·70) between the d₅₀ of the two methods. Trained operators can visually estimate gravel–cobble bed surface d₁₆ to uncertainties of 41 per cent, d₅₀ to 15 per cent and d₈₄ to 11 per cent (for example, there is a 5·5 mm error on a d₈₄ size of 50 mm). Furthermore, evidence shows that if operators are properly trained, a calibration relation for each percentile can be applied independently of operators. This visual characterization allows effective detailed mapping of spatial patterns in substrate size distribution along extensive reaches of gravel‐bed rivers. The technique can be very useful in creating terrain models for various geomorphological, hydrological and biological applications such as the determination of entrainment thresholds, hydraulic roughness and substrate suitability for benthic insects or salmonid habitat. Copyright © 2001 John Wiley & Sons, Ltd.     

Sedimentation in the riparian zone of an incising river

This paper focuses on one aspect of riparian zone change associated with channel incision. It presents information on sedimentation within the riparian zone of the River Garonne, France, derived from both historical and contemporary sources. The riparian zone investigated is morphologically complex, containing a remnant island and cut‐off channel. Information drawn from historical and contemporary sources permits the reconstruction of channel planform and cross‐profile change, as well as an assessment of changes in riparian zone sedimentation rates and patterns. Very significant changes are identified over the last 50 years: a change from a multiple thread to single thread channel planform; high rates of riparian zone sedimentation of the order of 0·5 to 2·5 cm a⁻¹; clear spatial patterns in over‐bank sedimentation, reflecting topographic and vegetational variations and flood event magnitude; and a reduction in morphological and vegetational diversity through the period, which is expected to continue as the zone is transformed into an increasingly homogeneous sediment sink. Copyright © 2001 John Wiley & Sons, Ltd.     

Modified state–space procedures for pseudodynamic testing

The existing on‐line numerical integration algorithms are derived from the Newmark method, which is based on an approximation of derivatives in the differential equation. The state–space procedure (SSP), based on an interpolation of the discrete excitation signals for piecewise convolution integral, has been confirmed as more reliable than the Newmark method in terms of numerical accuracy and stability. In an attempt to enhance the pseudodynamic test, this study presents an on‐line integration algorithm (referred to as the OS–SSP method) via an integration of the state–space procedure with Nakashima's operator‐splitting concept. Numerical stability and accuracy assessment of the proposed algorithm in addition to the explicit Newmark method and the OS method were investigated via an eigenvalue, frequency‐domain and time‐domain analysis. Of the on‐line integration algorithms investigated, the OS–SSP method is demonstrated as the most accurate method with an acceptable stability (although not unconditionally stable) characteristic. Therefore, the OS–SSP method is the most desirable method for pseudodynamic testing if the numerical stability criterion (Δt/T⩽0.5) is ensured for every vibration mode involved. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal design of a base isolated system for a high‐rise steel structure

In a previous study (Kaplan H, Seireg A., Int. J. Comput. Appl. Technol., 2000; 13 (1/2): 25–41), the authors proposed a base isolation system for earthquake protection of structures.The system incorporates spherical supports for the base, a specially designed spring‐cam system to keep the base rigidly supported under normal conditions and to allow it to move for the duration of the earthquake under the constraint of a spring with optimized stiffness characteristics. A single‐degree‐of‐freedom structure was considered to investigate the feasibility of the concept. The simulation of the system response shows a 20 times reduction of the transmitted force as a result of using the proposed design in the considered case. This paper extends the previous study to the case of a 40‐storey steel structure subjected to the Taft as well as El Centro earthquakes. A 7.5 and 6 times reduction of the maximum transmitted force was achieved for the considered disturbances, respectively, without any adverse effects due to the tilting moment which is inherent in this type of base isolation. Copyright © 2001 John Wiley & Sons, Ltd.     

Metamorphic condition of a regional metamorphic complex in the Omuta district in northern Kyushu,southwest Japan

A high‐temperature (T) metamorphic complex occurs in the Omuta district, northern Kyushu, Japan. Three metamorphic zones are defined based on pelitic mineral assemblage, i.e. chlorite–biotite zone, muscovite–andalusite zone and sillimanite–K‐feldspar zone with ascending metamorphic grade from north to south. Two isograds trend approximately east–west, which is oblique to the boundary between the metamorphic complex and the Tamana Granodiorite located on the southeast. The metamorphic condition of two pelitic rocks that occur in the muscovite–andalusite zone and sillimanite–K‐feldspar zone are estimated as 510 ±30 °C, 300 ±60 MPa and 720 ±30 °C, 620 ±60 MPa, respectively. Thermodynamic consideration reveals that use of the same geothermobarometer enables precise determination of the difference in pressure between the samples as 320 ±10 MPa. This indicates that the pelitic samples were metamorphosed at different depth by 11–12 km that is significantly larger than the geographic distance of 6.8 km between the sample localities. This also suggests that crustal thinning took place after the high‐T metamorphism. The high‐T metamorphic complex is, therefore, not of static contact metamorphism but of dynamic regional metamorphism. The present result combined with petrological and chronological similarities implies that this complex suffered the regional Ryoke metamorphism.