柳伊河水电站大坝右岸坝区研究

In the paper in order to ascertain the condition of the right-bank of the dam at the Vilyui hydroelectric power plant measurements are applied to obtain experimental date such as drilling borehole,hydrolocation and so forth. By finding out the distribution of the temperature field some corresponding measures are taken to improve the stability of the dam during the change of the ground temperature. And finally some conclusions are draw to the study.     

变降深抽水附近地下水非稳定运动的积分方程解

根据完整井变流量抽水附近地下水运动的解析解,利用积分方程的方法,推导出了水井水位降深以任意一种函数关系随时间变化时含水层中地下水非稳定运动积分方程形式的解,并提出了该积分解相应的近似计算方法.最后通过一个实例验证了该方法的实用性.     

The organisation of fish assemblages in the regulated Lima basin, Northern Portugal

In order to understand the structure of fish assemblages in the modified Lima basin (Northern Portugal), two distinct datasets concerning the presence and abundance of fish species were subjected to multivariate analysis. On the River Lima two types of flow modification are present within kilometres of one another: (a) a reduced and constant flow due to hypolimnetic release; and (b) an intense and irregular flow. A comparison of their influence on fish assemblages revealed a gradient of assemblage types from tributaries to main river sites. The latter were characterised by a strong dominance of cyprinids, particularly Iberian barbel (Barbus bocagei). The former harboured two kinds of fish assemblages: those closer to the river mouth were dominated by the cyprinids Iberian chub (Squalius carolitertii) and Iberian nase (Chondrostoma polylepis), which were also frequently present in the main river; while in those further upstream the predominant species was the brown trout (Salmo trutta). Although explanatory variables such as distance from source, altitude, substrate coarseness and width were the primary correlates of fish assemblage composition, dam construction and flow regulation also had a significant effect upon assemblage structure, particularly by: i) reducing the importance of migratory species; ii) constraining the presence of trout in the regulated segments; and iii) simplifying the community, especially in the case of the constant and reduced flow regime.     

Magmatic effects of the lunar late heavy bombardment

Large volumes of mare basalts are present on the surface of the moon, located preferentially in large impact basins. Mechanisms relating impact basins and mare basalt eruptions have previously been suggested: lunar impacts removed low-density material that may have inhibited eruption, and created cracks for fluid flow [Icarus 139 (1999) 246], and lunar basins have long been described as catchments for magma (e.g., [Rev. Geophys. Space Phys. 18 (1980) 107] and references therein). We present a new model for melt creation under near side lunar basins that is triggered by the impacts themselves. Magma can be produced in two stages. First, crater excavation depressurizes underlying material such that it may melt in-situ. Second, the cratered lithosphere rises isostatically, warping isotherms at the lithosphere-asthenosphere boundary which may initiate convection, in which adiabatic melting can occur. The first stage produces by far the largest volume of melt, but convective melting can continue for up to 350 Ma. We propose that giant impacts account for a large portion of the volume and longevity of mare basalt volcanism, as well as for several compositional groups, including high alumina, high titanium, KREEP-rich, and picritic magmas.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

The influence of thermochemical convection on the fixity of mantle plumes

A general feature of both isochemical and thermochemical studies of mantle convection is that horizontal plume velocities tend to be smaller than typical convective velocities, however, it is not clear which system leads to a greater fixity of mantle plumes. We perform two- and three-dimensional numerical calculations and compare both thermochemical and isochemical cases with similar convective vigor to determine whether presence of a dense component in the mantle can lead to smaller ratios of horizontal plume velocity to surface velocity. We investigate different viscosity and density contrasts between chemical components in the thermochemical calculations, and we perform isochemical calculations with both free-slip and no-slip bottom boundary conditions. We then compare both visually and quantitatively the results of the thermochemical and isochemical calculations to determine which leads to greater plume fixity. We find that horizontal plume velocities for thermochemical calculations are similar to those from isochemical calculations with no-slip bottom boundary conditions. In addition, we find that plumes tend to be more fixed for isochemical cases with free-slip bottom boundary conditions for two-dimensional calculations, however, in three dimensions, we find that plume fixity is similar to that observed in thermochemical calculations.     

Molecular modeling of the 10-Å phase at subduction zone conditions

Molecular dynamics (MD) modeling of the 10-Å phase, Mg₃Si₄O₁₀(OH)₂·xH₂O, with x=2/3, 1.0 and 2.0 shows complex structural changes with pressure, temperature and water content and provides new insight into the structures and stabilization of these phases under subduction zone conditions. The structure(s) of this phase and its role as a reservoir of water in the mantle have been controversial, and these calculations provide specific predictions that can be tested by in situ diffraction studies. At ambient conditions, the computed structures of talc (x=0) and the 10-Å phases with x=2/3 and 1.0 are stable over the 350-ps period of the MD simulations. Under these conditions, the 10-Å phases show phlogopite-like layer stacking in good agreement with previously published structures based on powder X-ray diffraction data for samples quenched from high-pressure and high-temperature experiments. The calculations show that the 10-Å phase with x=2.0 is unstable at ambient conditions. The computed structures at P=5.5 GPa and T=750 K, well within the known stability field of the 10-Å phase, change significantly with water content, reflecting changing H-bonding configurations. For x=2/3, the layer stacking is talc-like, and for x=1.0, it is phlogopite-like. The calculations show that transformation between these two stackings occurs readily, and that the talc-like stacking for the x=2/3 composition is unlikely to be quenchable to ambient conditions. For x=2.0, the layer stacking at P=5.5 GPa and T=750 K is different than any previously proposed structure for a 10-Å phase. In this structure, the neighboring basal oxygens of adjacent magnesium silicate layers are displaced by b/3 (about 3 Å) resulting in the Si atoms of one siloxane sheet being located above the center of the six-member ring across the interlayer. The water molecules are located 1.2 Å above the center of all six-member rings and accept H-bonds from the OH groups located below the rings. The b/3-displaced structure does not readily transform to either the talc-like or phlogopite-like structure, because neither of these stackings can accommodate two water molecules per formula unit. There is likely to be a compositional discontinuity and phase transition between the b/3-displaced phase and the phase with phlogopite-like stacking. The simulations reported here are the first to use the recently developed CLAYFF force field to calculate mineral structures at elevated pressures and temperatures.     

FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS

Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.     

山西省主要河流流域面雨量预报业务流程

以T213、HLAFS模式、MM5中尺度模式输出的格点资料以及日本降水量格点资料为基础，将影响山西降水的天气动力模型归纳为诊断模型，从中引出多个能够全面反映降水模型特征的综合物理因子；根据各种数值模式输出的降水量预报性能和质量优劣特点，依据数值模式的形势场预报优于要素场预报的现实，构造在不同环流形势背景下，启动不同预报方程的面雨量预报业务流程，有效地遏止了在环流形势调整时预报输出不能快速响应的弱点，提高了点和面雨量预报的准确度。     

北京连续降雪过程分析

该文对2002年12月份北京出现的1841年以来历史上最长的连续6天的降雪天气进行了合成分析和诊断分析。北半球合成环流形势显示，连续降雪发生在东亚稳定的纬向环流形势下，其上游地区强大经向环流和阻塞高压使中纬度东亚和西太平洋纬向环流得以维持。东亚合成环流的垂直结构表明，连续降雪期间华北地区始终处于锋区中，并存在低空辐合、高空辐散的散度场垂直分布结构。卫星水汽云图显示出有水汽通道向河套倒槽云系输送水汽。华北地区的诊断分析表明，地面和边界层中山东地区分裂高压南侧向北回流的偏南气流是造成降雪的主要水汽通道。变形场的流场结构使水汽在北京附近辐合。垂直剖面展现了华北回流降雪天气近地面层的浅薄的冷空气垫，和暖湿空气回流在冷空气垫上的爬升，并在其上形成一个浅薄的饱和层。