Response of the cladoceran community to trophic state change in Lake Apopka, Florida

A paleolimnological evaluation of cladoceran microfossils was initiated to study limnological changes in Lake Apopka, a large (125 km²), shallow (mean depth = 1.6 m), warm, polymictic lake in central Florida. The lake switched from macrophyte to algal dominance in the late 1940s, creating a Sediment Discontinuity Layer (SDL) that can be visually used to separate sediments derived from macrophytes and phytoplankton. Cladoceran microfossils were enumerated as a means of corroborating extant eutrophication data from the sediment record. Inferences about the timing and trajectory of eutrophication were made using the cladoceran-based paleo-reconstruction. The cladoceran community of Lake Apopka began to change abruptly in both total abundance and relative percent abundance just before the lake shifted from macrophyte to algal dominance. Alona affinis, a mud-vegetation associated cladoceran, disappeared before the SDL was formed. Planktonic and benthic species also began to increase below the SDL, indicating an increase in production of both planktonic and benthic species. Chydorus cf. sphaericus, an indicator of nutrient loading, increased relative to all other cladocerans beginning in the layer below the SDL and continuing upcore. Changes in the transitional sediment layer formed before the lake switched to phytoplankton dominance, including an increase in total phosphorus concentration, suggest a more gradual eutrophication process than previously reported. Data from this study supported conclusions from other paleolimnological studies that suggested anthropogenic phosphorus loading was the key factor in the hypereutrophication of Lake Apopka.     

Z油田低阻油层影响因素分析

通过对Y油田和Z油田电阻率影响因素对电阻率的影响对比，分析了Z油田低阻的原因及各影响因素影响程度。     

低应变反射波法在基桩检测中的应用实例及一些问题的探讨

根据应力波理论，介绍了用低应变反射波法在桩身完整性检测中的几个应用实例，并对检测中的一些问题作了探讨。     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

A critical state interpretation for the cyclic liquefaction resistance of silty sands

Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p₀<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

中国油气储层地质研究面临的挑战和发展方向

论述了我国采取“稳定东部 ,发展西部”的油气战略后 ,油气地质所面临的形势 ,以及油气工业的发展对储层地质提出四个领域的挑战 :深部储层、挤压盆地储层、低渗透储层和碳酸盐岩储层 ;这些都是石油勘探开发中久攻不克的难题。根据我国陆上东西部油气区的勘探开发实际和近年的储层研究实践 ,文章系统多视角地分析了这四个难题 ,并提出了相应客观的研究思路和研究方向。     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

软粘土层上的油罐差异沉降

根据某一大型油罐软基加固处理工程方案设计和优选需要,按照离心模型相似律,开展了三组模型试验,分别模拟了天然地基、土工合成材料袋装碎石垫层和既在填土层中设置袋装碎石垫层又在淤泥质粘土层设置土工合成材料排水板三种情况,以研究这一加固布置形式对减小高压缩性软土层地基上油罐罐底的差异沉降效果反应。模型油罐地基采用原型土重塑制备,现场土工合成材料袋装碎石采用柔性机织玻璃纤维细管塞装粗砂条模拟,并在不停机运转条件下模拟了多次充放水预压加载。试验结果表明,油罐软弱地基经土工合成材料袋装碎石加固后,罐底总沉降值和差异沉降值均明显小于天然地基情形下对应的沉降值,罐底畸变得到显著减小,就本文所述的土质条件、土层厚度和预压荷载强度,地基经加固处理后,油罐罐底畸变减小了近50 %。最后就土工合成材料在加固油罐地基布置形式的合理性进行了初步探讨。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.