Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.     

A study on benthic community structure in west of the Taiwan Strait and near the Taiwan Shoals

ＡｓｔｕｄｙｏｎｂｅｎｔｈｉｃｃｏｍｍｕｎｉｔｙｓｔｒｕｃｔｕｒｅｉｎｗｅｓｔｏｆｔｈｅＴａｉｗａｎＳｔｒａｉｔａｎｄｎｅａｒｔｈｅＴａｉｗａｎＳｈｏａｌｓ￥ＷｕＱｉｑｕａｎ；ＪｉａｎｇＪｉｎｘｉａｎｇ；ＸｕＨｕｉｚｈｏｕ；ＣａｉＥｒｘｉａｎｄＬｉｎ...     

遥感图像线性影纹理解专家系统设计与实现

线性影纹信息是遥感图像中的一类重要信息,线性影纹信息自动提取是遥感图像智能解译的重要研究领域。笔者采用基于特征对象的专家系统技术来完成线性影纹信息的简单类别提取,设计并实现了线性影纹理解专家系统;阐明了系统结构,解译规则获取、表达,基于消息的不确定性推理机及解释机的设计;最后利用系统做了线性影纹类别提取实验,结果表明基于特征对象的专家系统用于线性影纹类别自动提取是切实可行的,并具有较高的提取精度。     

大庆杏南地区葡Ⅰ组三角洲前缘储层的非均质性

当油田主力油层进入高含水期时,非主力油层接替主力油层将成为必然趋势。三角洲前缘亚相储层非均质性较强,一直以来被作为非主力油层。为提高非主力油层的储量动用程度,必须精细研究三角洲前缘亚相储层非均质性特征,查明剩余油分布规律,从而有效指导油田开发的调整挖潜。利用密井网、岩矿鉴定等资料对杏南地区葡I油层组前缘亚相储层进行研究,将三角洲前缘细分为枝状、朵状、席状3种类型,详细分析了不同沉积环境下砂体的成因类型,描述了不同类型砂体在平面上、空间上的展布特征和组合关系,不同砂体内部性质的差异以及砂体内部微观孔隙结构的类型和分布特征,从平面、层间、层内以及微观特征等方面研究了三角洲前缘储层的非均质性。在此基础上分析了储层非均质性对剩余油分布的影响,指出不同三角洲前缘储层中剩余油的富集位置。     

大兴安岭白音诺尔铅锌矿控矿构造研究与找矿预测

成矿物质来源及控矿因素是矿床学研究的前沿课题。过去人们认为成矿物质主要源于含矿围岩的萃取。因此,找矿重点是寻找矿源层。但是,更多的事实表明,成矿物质主要来自深源,通过地幔热柱多级演化迁移至地壳,并在幔枝构造较好的控矿构造空间聚集成矿。本文探讨了大兴安岭中南段的成矿作用,总结了该区的主要控矿构造,指出了不同级别构造对成矿的控制作用,并预测了不同级别的成矿靶区。     

禹城市城乡用地结构和布局分析

统筹城乡用地、优化城乡用地结构和布局,既是节约和集约用地的重要途径,又是统筹城乡发展的客观需要。通过分析禹城市城乡用地结构和布局,提出优化城乡用地结构和布局的建议和对策,从而为制定合理的土地利用总体规划提供基本的依据。     

城市空间信息基础设施建设结构模型研究

首先对WebGIS的发展状况进行了分析,然后介绍了Web Services的工作原理,给出了面向Geo-Services的城市空间信息基础设施建设的结构模型,并依据该模型对北京市基础地理信息数据库集成项目进行了典型研究.     

葛店矿双庙扩大区三维地震勘探

葛店煤矿双庙扩大区位于豫、皖两省交界处。勘探区为一轴向北北东向的不对称向斜构造,地层倾角26°～30°,测区深部有岩浆岩侵入体,严重影响煤层赋存形态;地表条件复杂,村庄密集、河流较多,测区东侧塌陷区水塘大面积分布．三维地震勘探野外施工难度大。本区地震勘探观测系统设计为12线18炮制,为避免偏移归位及叠加次数降低等问题,在向斜轴部两侧、村子周边及河岸处适当加密炮点,并在塌陷区利用钢钎插置检波器以保证CDP点完整性。数据处理采取了叠前反褶积、叠前时间偏移等技术,数据处理效果显著。遵循多波组对比、多个数据体综合解释的原则,以纵向、横向和任意时间剖面相结合,充分利用三维可视化技术进行地震资料解释。本次勘探成果查明了主采煤层三2^2、二2煤层的构造形态及埋藏深度;解释落差5m以上断层34条,其中修改原有断层5条;另外新发现小于5m的异常断点22个。经巷道验证煤层底板标高误差0．43％～1．96％,巷道已揭露断层7条,与解释成果基本一致。     

New basis for the constitutive modelling of aggregated soils

Natural and compacted soils are usually characterized by aggregation of particles. The mechanical behaviour of these materials depends on soil structure. The oedometric compression tests performed on aggregated samples presented here showed that these materials exhibit a yield limit depending not only on stress history and stress state but also on soil structure. Evidence is provided using the neutron tomography technique. These results revealed that soil structure modification occurs together with plastic deformations. The experimental results are used to propose a new state parameter to quantify the soil structure. Based on pore-scale experimental observations, an evolution law for this parameter is proposed as a function of associated plastic strains. Considering both soil fabric and inter-particle bonding effects, a new yield limit depending on stress state, stress history and soil structure is introduced for the aggregated soils. Accordingly, a new constitutive framework consistent with strain hardening plasticity is proposed to consider soil structure effects in the modelling of aggregated soils.     

杠杆点评估及设计空间抗差

本分析了杠杆点的几何含义和统计特征,从杠杆点的保差性,矩阵的摄动和参数估值可靠性的观点出发讨论了杠杆点的不利和有利的两个方面,提出了一个全面的设计空间抗差方案。