定位卫星轨道监视系统研究

与卫星测控中心的卫星轨道参数相比,地球同步卫星定位系统中轨道计算子系统所计算出的卫星星历数据具有实时性强、精度高的特点,如何有效利用该星历数据来分析卫星轨道运行情况是该领域的一个热门研究课题。在介绍卫星轨道测定法的基础上,提出了以卫星速度变化率和卫星星下点为主要监视内容的卫星轨道监视系统,通过系统的试运行结果可以看出,该系统能够有效地监视卫星的瞬时和长期运行情况,为卫星的在轨运行管理提供了一种直观、形象的监视方法。     

GPS在计算导弹脱靶量中的应用研究

将GPS技术应用于导弹靶试脱靶量测量,并对计算过程作了较为详细的分析和探讨。试验证明：利用GPS测定脱靶量,测量精度高,简单易行,可以在靶场逐步试验推广。     

多孔紊动射流的数值模拟与实验研究进展

多孔射流作为流体运动的一种重要类型,在工程中具有非常广泛的用途。由于多孔射流各股水流之间的卷吸和掺混的存在,增加了流场的复杂性。长期以来研究人员从理论分析、实验测量和数值模拟方面对多孔紊动射流进行了大量的研究工作,目前已经认识了流场中的许多流动特性和流动机理。从数值模拟和实验研究两个方面,比较分析了国内外多孔紊动射流的研究现状和研究结果,评述了不同湍流模型以及不同实验测量方法对紊动射流的预测能力,讨论了存在的问题并对该领域的研究方向进行了展望。     

多尺度空间线状实体形状相似关系的表达与度量

本文对空间数据多尺度表达中线状实体综合前后的形状相似性进行了描述、分析和研究。通过调查统计,得出了衡量线状实体形状相似程度的两个重要参量SIMⅠ、SIMⅡ,基于这两个参量给出了空间线状实体形状相似性的定义以及在不同尺度下线状实体形状相似性的度量方法,并用实例进行验证。为空间数据多尺度表达时线状实体的形状表达提供了一种分析和评价手段。     

GALILEO系统局域完备性监测设计与实现

根据GALILEO系统局域完备性概念和网络RTK的基本理论,建立导航系统局域网络完备性监测理论和算法。算法主要包括网络系统完备性算法和用户完备性算法,内容包括网络误差模型的建立、插值算法的选择、误差改正数完备性指标的计算、完备性指标的验证和用户保护水平的计算等。仿真结果表明,采用网络RTK技术和完备性监测算法,飞机的平面保护水平和垂直保护水平均小于完备性告警门限值,可以满足飞机Ⅱ类和Ⅲ类精密进近的完备性要求,为卫星导航系统在民航中的应用提供完备性理论基础。     

Influence of dimethylsulfide produced by marine algae on the global climate

DMS (dimethylsulfide), a breakdown product of cellular solutes of many species of macroalgae andphytoplankton plays an important role in regulating global climate and counteracting partly the "greenhouse" effect.In this paper, the advance and prospects of DMS study are reviewed and discussed with respectto DMS sample storage, measurement and importance in regulating global climate and the acidity ofrain and aerosol.     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.     

A comparative error analysis of manual versus automated methods of data acquisition for algebraic strain estimation

This paper presents a statistical analysis of the algebraic strain estimation algorithm of Shimamoto and Ikeda [Shimamoto, T., Ikeda, Y., 1976. A simple algebraic method for strain estimation from deformed eillipsoidal objects: 1. Basic theory. Tectonophysics 36, 315–337]. It is argued that the error in their strain estimation procedure can be quantified using an expected discrepancy measure. An analysis of this measure demonstrates that the error is inversely proportional to the number of clasts used. The paper also examines the role of measurement error, in particular that incurred under (i) a moment based and (ii) manual data acquisition methods. Detailed analysis of these two acquisition methods shows that in both cases, the effect of measurement error on the expected discrepancy is small relative to the effect of the sample size (number of objects). Given their relative speed advantage, this result favours the use of automated measurement methods even if they incur more measurement error on individual objects. Validation of these results is carried out by means of a simulation study, as well as by reference to studies appearing in previous literature. The results are also applied to obtain an upper bound on the error of strain estimation for various studies published in the literature on strain analysis.     

Improved reliability in the interpretation of geochemical measurements by the quantification of uncertainty from sampling

All geochemical measurements require the taking of field samples, but the uncertainty that this process causes is often ignored when assessing the reliability of the interpretation, of the geochemistry or the health implications. Recently devised methods for the estimation, optimisation and reduction of this uncertainty have been evaluated by their application to the investigation of contaminated land. Uncertainty of measurement caused by primary sampling has been estimated for a range of six different contaminated land site investigations, using an increasingly recognized procedure. These site investigations were selected to reflect a wide range of different sizes, contaminants （organic and metals）, previous land uses （e.g. tin mining, railway sidings and gas works）, intended future use （housing to nature reserves） and routinely applied sampling methods. The results showed that the uncertainty on measurements was substantial, ranging from 25% to 186% of the concentration values at the different sites. Sampling was identified as the dominant source of the uncertainty （〉70% of measurement uncertainty） in most cases. The fitness-for-purpose of the measurements was judged using the optimized contaminated land investigation （OCLI） method. This identifies the optimal level of uncertainty that reduces to overall financial loss caused by the measurement procedures and the misclassification of the contamination, caused by the uncertainty. Generally the uncertainty of the actual measurements made in these different site investigations was found to be sub-optimal, and too large by a factor of approximately two. The uncertainty is usually limited by the sampling, but this can be reduced by increasing the sample mass by a factor of 4 （predicted by sampling theory）. It is concluded that knowing the value of the uncertainty enables the interpretation to be made more reliable, and that sampling is the main factor limiting most investigations. This new approach quantifies this problem for the first time, and allows sampling procedures to be critically evaluated, and modified, to improve the reliability of the geochemical assessment.