Nonlinear analysis of laterally loaded rigid piles in cohesive soil

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.     

Transient loading-related settlement of a square foundation on geogrid-reinforced sand

Summary Laboratory model test results are presented that determine the effectiveness of using layers of geogrids as reinforcement in sand to reduce the settlement of square surface foundations subjected to transient loading. The model tests were conducted with only one type of geogrid at one relative density of compaction of sand. The maximum intensity of the transient load applied always exceeded the static ultimate bearing capacity of the foundation when supported by unreinforced sand. The settlement reduction factors for various depths of reinforcement have been determined.     

端承桩基础轴向地震反应分析

本文对分层弹性地基中端承桩基础通过特性分析建立了合理的力学模型，通过动力分析，给出了端承桩基础轴向自振特性及在竖向地震载荷作用下强迫反应的解析解。文中的解析公式为分层弹性地基中的端承桩基础轴向动力反应分析提供了一种新的解析方法。     

岩石在动载作用下的破坏与强度

研究岩石的动载性能,在凿岩爆破上有重要意义。分段式霍布金生杆已应用于研究岩石对波动载荷的效应。作者使用改型的霍布金生杆法对岩石试件在动载下的破坏强度作了试验研究。冲击试验台配合微处理机作高速数据显示与处理,借助应力波在弹性杆中的一维理论对数据进行解释。测定了多种岩石静载与动载的强度,并对岩石试件尺寸及加载速率的影响也作了试验。     

循环荷载特征对焊接工字形钢支撑低周疲劳性能的影响

通过14根铰支焊接工字形支撑在不同特征的循环轴向位移荷载下的低周疲劳试验，研究了循环轴向位移荷载的位移幅值、平均位移幅值及加载次序等因素对钢支撑低周疲劳及耗能性能的影响。研究发现，对称循环荷载中幅值越小，支撑翼缘局部屈曲发展越晚，其耗能及承载力退化也越平缓。文中提出了支撑在幅值6δ≤Δδ≤12δy的对称循环荷载下的疲劳寿命经验公式。试验表明，循环荷载的位移幅值是支撑疲劳损伤及耗能退化的最主要影响因素，过载峰效应及适当的平均压位移幅值改善了钢支撑低周疲劳及耗能性能。     

细颗粒石英光释光测年:简单多片再生法

文中报道了细颗粒石英光释光测年中测量等效剂量的一种可靠技术——简单多片再生法。该技术的核心是引入单片再生法中试验剂量校正感量变化的功能,即在天然和再生多测片光释光信号测量后,再对各测片辐照以试验剂量,利用试验剂量的光释光信号响应对各测片归一化,同时校正可能发生的感量变化。从方法学上,这一技术具有以下优点1)试验剂量可以校正各测片的感量变化;2)对各测片归一化,克服了实验数据分散度的问题;3)通过对比简单多片再生法与单片再生法在测年中的表现,证实简单多片再生法可以克服单片再生法中可能发生的光释光信号的积累问题。最后,文中通过测定参考年龄样品,即洛川剖面末次冰期马兰黄土(L1)的开始堆积年龄,验证了简单多片再生法的可靠性,即在提高测量准确度和精度的同时,更节约时间     

Determination of vertical displacements over the coastal area of Korea due to the ocean tide loading using GPS observations

This paper describes the GPS applicability for detecting the vertical displacements of ground stations caused by ocean tide loading effects. An experiment was carried out using 12 permanent GPS stations located in the coastal area of Korea using data in the period 1 July until 26 August 2003. The relative height differences were calculated from hourly DGPS data processing based on the carrier-phase observation. The power spectra of the M₂ and N₂ constituents of ocean tide loading were derived using the CLEAN algorithm. The differential vertical displacements generated by the ocean tide loading effect are typically 3–25 mm in coastal area of the Korea. We compared the results from GPS with those of the ocean tide models, NAO.99Jb regional model and GOT00.2, FES99 global models. The M₂ (N₂) amplitude differences of vertical displacements between GPS and GOT00.2 is 1.22 ± 3.61 mm (1.01 ± 1.48 mm), and that of the M₂ (N₂) amplitude difference between GPS and FES99 is 0.04 ± 4.64 mm (0.64 ± 1.75 mm), whereas the M₂ (N₂) amplitude difference between GPS and NAO.99Jb are 0.05 ± 1.03 mm (0.86 ± 1.18 mm). The highest vertical displacements at the PALM station are found for 24.5 ± 0.7 mm from GPS observation, and 22.9 mm from the regional model NAO.99Jb and 13.17 and 10.00 mm from the global models GOT00.2 and FES99, respectively. These values show that the vertical displacements derived from GPS are in good agreement with those of the regional model NAO.99Jb around Korea, more than with the global models. This result indicated that GPS is an effective tool to measure the vertical displacement caused by the ocean tide loading effect in the coastal area, and we need to use the NAO.99Jb ocean tide model rather than the global ocean tide models in and around the Korean peninsula for position determination with permanent GPS installations. This work demonstrates that vertical displacement caused by the M₂ and N₂ constituents of ocean tide loading can be measured by carrier-phase DGPS.     

基于TCP/IP协议的地震波形数据实时传输技术在数字地震台网联网中的应用

介绍了TCP/IP传输协议及其在广东省数字地震台网联网中进行地震波形准实时传输应用的技术思路和解决方案.     

叠前正演模拟与偏移的网络并行计算

在叠前深度偏移和非零炮检距声波方程正演计算过程中包含了大量的可并行计算的成分。作者在本文中提出叠前正演模拟与偏移的网络并行计算算法，并基于TCP／IP协议，将该算法设计成网络并行处理程序，极大地提高了计算效率。实际运算结果证明，本文提出的并行算法和技术路线是切实可行的。     

Cyclic strength and deformation of crushable carbonate sand

Cyclic triaxial tests have been carried out on a skeletal carbonate sand from the west coast of Eire. Results are presented for undrained cyclic shear tests on samples with 80% of relative density consolidated under both isotropic and anisotropic conditions. Failure was defined as a 5% double amplitude cyclic strain and a 5% peak axial strain for stress-reversal and non-reversal stress conditions, respectively. Using this definition the cyclic strength for isotropically consolidated samples was affected by the confining pressure although the angular platey nature of the sand resulted in higher cyclic strengths than for a comparable silica sand. For anisotropically consolidated samples the cyclic strength increased with increasing initial static shear stress while on the other hand the cyclic strength normalised in the usual way with respect to the initial confining pressure decreased as this pressure increased.