Evaluating foundation mass,damping and stiffness by the least‐squares method

This paper discusses how to use the three‐dimensional (3D) time‐domain finite‐element method incorporating the least‐squares method to calculate the equivalent foundation mass, damping and stiffness matrices. Numerical simulations indicate that the accuracy of these equivalent matrices is acceptable when the applied harmonic force of 1+sine is used. Moreover, the accuracy of the least‐squares method using the 1+sine force is not sensitive to the first time step for inclusion of data. Since the finite‐element method can model problems flexibly, the equivalent mass, damping and stiffness matrices of very complicated soil profiles and foundations can be established without difficulty using this least‐squares method. Copyright © 2003 John Wiley & Sons, Ltd.     

Efficiency of base isolation systems in structural seismic protection and energetic assessment

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

Comparative study of the inelastic response of base isolated buildings

This article presents a numeric comparative study of the inelastic structural response of base isolated buildings. The comparative study includes the following isolation systems: laminated rubber bearings, New Zealand one, pure friction and the frictional pendulum ones. The study is based on obtaining non‐linear response spectra for various design parameters using six earthquake records. Usually the base isolation of a new building seeks to maintain the structure in the linear elastic range. The response of old weak buildings or the response of new ones subjected to extreme earthquakes may not be, necessarily, in the aforementioned ideal elastic range. Consequently, it is important to characterize the response of isolated buildings responding inelastically. A conclusion from this research is that the isolators affect significantly the structural response of weak systems. Rubber isolators seem slightly less sensitive to plastification that may occur in the structure compared to friction isolators. Ductility demands in the structure are affected significantly by friction and neoprene protected systems, in particular sliding ones where larger demands are obtained. Copyright © 2002 John Wiley & Sons, Ltd.     

A Linear Programming Approach to Determine the Normative Composition of Sedimentary Rocks

The analysis of modal and normative composition of sedimentary rocks is widely used for studying their sources and tectonic settings. The normative calculation of the mineral composition of rocks in this study is formulated as a linear programming problem and is solved by means of the simplex method. This enables both simultaneous and successive subtraction of a set of basic minerals from a rock sample represented by its chemical composition {SiO₂...LOI}. Such an approach provides a more exact calculation of the contribution of basic minerals in the rock. This mathematical approach is used to study two representative sets of sandstones and fine-grained rocks from a Meso- to Neoproterozoic marginal basin of southeastern Siberia (Uchur–Maya region, Yakutia) and a Pennsylvanian-Lower Permian uplifted continental block in Colorado, USA. The calculated normative mineral compositions of the Siberian sandstones are consistent with the observed modal compositions. These sandstones vary from K- Feldspar rich arkoses at the base of the sequence (the Uchur Group, lower Riphean) to quartz arenites or lithic sandstones and wacke in transgressive successions of the middle-upper Riphean. Arkoses and quartz arenites are dominant in Meso- to Neoproterozoic Siberia. These samples represent craton interior uplifted basement and quartzose, recycled orogen provenance of a stable craton in Rodinia. There are higher but consistent discrepancies between the calculated and observed compositions for the Pennsylvanian to Lower-Permian arkoses and quartz arenites (Sangre de Cristo, Belden, and Maroon Formations). The differences between the predicted and observed mineralogy may be due to uncertainties in the modes in the matrix and cement of the sandstones. This normative program should supplement modal calculations and provide better genetic constructions, especially in case of matrix-rich sandstones.     

Smoothing and Change Point Detection for Gamma Ray Count Data

Gamma ray detectors are used to measure the natural radioactivity of rocks. For a number of boreholes drilled at a site the gamma ray detector is lowered into each borehole and counts of gamma ray emissions at different depths are recorded as the instrument is gradually raised to ground level. The profile of gamma counts can be informative about the geology at each location. The raw count data are highly variable, and in this paper we describe the use of adaptive smoothing techniques and change point models in order to identify changes in the geology based on the gamma logs. We formulate all our models for the data in the framework of the class of generalized linear models, and describe computational methods for Bayesian inference and model selection for generalized linear models that improve on existing techniques. Application is made to gamma ray data from the Castelreagh Waste Management Centre which served as a hazardous waste disposal facility for the Sydney region between March 1974 and August 1998. Understanding the geological structure of this site is important for further modelling the transport of pollutants beneath the waste disposal area.     

声波测试中振子衰减的线列阵模型

从声波在岩体中传播产生衰减的基本原理出发，建立了声波衰减振子的线列阵模型。该模型是将传播声波路径的岩体分为若干个振子，从波动概念出发，以振动原理作依据建立波动方程．为探讨岩体声波衰减机制提供了一种新的研究方法，把振动和波动直观地联系起来．单一方向上有限点的声波测试技术有可能被多方向的声测技术所代替．该模型的建立，使模态分析和参数识别方法应用到岩体声波测试技术中成为可能。     

Hilbert-Huang变换在密频结构阻尼识别中的应用

Hilbert—Huang变换是一种新的数据处理方法，由经验模分解(Empirical Mode Decomposition)技术及Hilbert变换两部分组成。本文研究此方法对于密频结构阻尼识别的应用。首先对于两自由度系统模型，说明该方法用于阻尼识别的步骤。进而研究存在频率密集现象的高层建筑的阻尼识别问题。上述结果与理论值及由半功率带宽法的识别值进行了比较，对比显示Hilbert．Huang方法较传统方法具有良好的识别密频结构阻尼的性能，适用于大型结构的系统识别。     

淮安市典型土动力特性的试验研究

通过对淮安市典型的全新世沉积粉土和粘性土进行室内自振柱试验及粉土的动三轴液化试验，把粉土和粘性土的自振柱试验结果与Seed和Idriss建议的砂土及饱和粘土的剪切模量比G／Gmax-γ曲线和阻尼比λ-γ曲线的变化范围进行对比，结果表明：粉土的剪模量比要比饱和粘土的大，而比砂土的剪模量比要小，其阻尼比接近于砂土的阻尼比；粘性土的剪模量比要比一般饱和粘土的大，而与砂土的剪模量比相近，其阻尼比要比砂土的略低；粉土的抗液化强度与液化振次之间的关系可以用指数函数来表示，其振动孔隙水压力的发展规律可以用反正弦三角函数拟合；粘粒含量是影响淮安市全新世沉积粉土抗液化强度的主要影响因素。