Predicting ground-motion variations at the Turkey-flat test site,California

Results of a single group participating in an international experiment are analyzed. The experiment served to verify computational predictions of the ground-motion variations due to near-surface geological effects at a site established for that purpose by the California Department of Conservation. Based on an acceleration record at a rock location, and geotechnical model of medium, records at the other locations of a nearby sedimentary deposit were predicted. A 2-D finite-difference sensitivity analysis suggested that the lateral wave-propagation effects are negligibly small, and locally 1-D computations are sufficient for the present site. Those computations are compared with observations not available to the authors during the blind prediction. Peak accelerations, peak velocities and RMS accelerations were predicted with errors less than 159%, 114% and 62%, respectively. Maxima of the response spectra were fitted within a factor of 2. The predicted and observed Husid's plots (i.e., the normalized cumulative plots of the acceleration squared) have the correlation coefficients 0.98. The detected misfits do not show any simple relation to the instrument location, component, frequency, or time.     

Origin of Fe-Ti Oxide Ores in Mafic Intrusions: Evidence from the Panzhihua Intrusion, SW China

Economic concentrations of Fe–Ti oxides occur as massive,conformable lenses or layers in the lower part of the Panzhihuaintrusion, Emeishan Large Igneous Province, SW China. Mineralchemistry, textures and QUILF equilibria indicate that oxidesin rocks of the intrusion were subjected to extensive subsolidusre-equilibration and exsolution. The primary oxide, reconstructedfrom compositions of titanomagnetite in the ores and associatedintergrowths, is an aluminous titanomagnetite (Usp₄₀) with 40wt % FeO, 34 wt % Fe₂O₃, 16·5 wt % TiO₂, 5·3 wt% Al₂O₃, 3·5 wt % MgO and 0·5 wt % MnO. This compositionis similar to the bulk composition of the oxide ore, as inferredfrom whole-rock data. This similarity strongly suggests thatthe ores formed from accumulation of titanomagnetite crystals,not from immiscible oxide melt as proposed in earlier studies.The occurrence of oxide ores in the lower parts of the Panzhihuaintrusion is best explained by settling and sorting of densetitanomagnetite in the ferrogabbroic parental magma. This magmamust have crystallized Fe–Ti oxides relatively early andabundantly, and is likely to have been enriched in Fe and Tibut poor in SiO₂. These features are consistent with fractionationof mantle-derived melts under relatively high pressures (10kbar), followed by emplacement of the residual magma at 5 kbar.This study provides definitive field and geochemical evidencethat Fe–Ti oxide ores can form by accumulation in ferrogabbro.We suggest that many other massive Fe–Ti oxide depositsmay have formed in a similar fashion and that high concentrationsof phosphorus or carbon, or periodic fluctuation of fO₂ in themagma, are of secondary importance in ore formation. KEY WORDS: ELIP; Fe–Ti oxide ore; layered intrusion; Panzhihua; QUILF     

烧伤病人应用CHIMEHERB人工皮的临床评价

本研究初步评价CHIMEHERB人工皮的治疗效果.74例,105个创面应用人工皮:供皮区47个创面,愈合时间平均为9±1.94d(天),油纱布对照为11.7±1.93d(P<0.01);14个浅Ⅱ°新鲜创面,70％在3～5d内逐渐干燥与创面紧密粘附,平均愈合时间为9.8±3.09d;11个存留上皮组织的削痂深Ⅱ°创面,平均5.7±1.7d干燥,平均愈合时间为10.55±3.09d,不需植自体皮;8个削痂刨面至脂肪组织或切痂创面4～9d更植自体皮,其存活率近乎100％,2个创面因残留坏死组织而失败;人工皮应用于16个自体皮间隙创面,除三个网状植皮和一个条状植皮创面失败外,所植自体皮都在人工皮下扩展融合,未观察到占位现象;对后期残余小创面有良好的效果.本研究结果提示人工皮对创面愈合具有有利影响.主要适用于供皮区、浅Ⅱ°新鲜创面、深Ⅱ°脱痂和削痂后存留上皮组织较多的创面、自体皮间隙创面和后期残余小创面,不适宜于深Ⅲ°新鲜创面.     

The fate of dumped sediments monitored by a high-resolution multibeam echosounder system,Weser Estuary,German Bight

With the development of high-resolution multibeam echosounder systems (MBES) for surveying shallow-water areas a new tool is available to monitor rapid changes in seabed morphology as, e.g., caused by the dumping of dredge spoil in coastal waters. In this study, four data sets of repeated bathymetric surveys with a MBES were processed and analyzed. The data were collected in a 1.94-km² dumping site in the outer Weser Estuary (German Bight). Between June and December 1998, 2.6 million m³ of dredged sediment were deposited there. The bathymetric maps generated in the course of this study reveal features such as subaqueous dunes, scour holes, and mounds of dumped dredge spoil. The mean water depth decreased by about 1 m during the dumping period. Furthermore, difference grids showing changes in sediment volume allowed a calculation of the sediment budget for the monitored area. After a time period of only 5 months, 0.5 million m³ of the originally dumped 2.6 million m³ of dredge spoil had already been removed from the dumping site.     

疏浚物倾倒区海水水质级别的模糊综合评价

应用模糊综合评价方法对大连臭水套海域疏浚物预选倾倒区的水质状况进行了评价，得到了有益的结论。     

底部浮泥表层推移速度分布的ADCP—GPS估测方法

ADCP对底跟踪走航观测的流速数据中包含水体底部浮泥、底沙运动信息,对比GPS定位方法算出的水体流速数据可以分离出浮泥相对于GPS定位的运动信号,从而达到对底质推移观测的目的。     

卫星高度计海上定标场及定标方法研究进展

介绍了卫星高度计定标中海面高度和后向散射系数的定标方法。在后向散射系数的定标中介绍了利用有源定标器和微波辐射计定标两种方法。结合卫星高度计的特点,提出了海上定标场选取所需注意的问题,并介绍了目前比较成功的几个定标场及其定标结果,旨在为我国今后发射的卫星高度计绝对定标和定标场的选取提供依据。     

基于色层图与纹理融合的地形晕渲

针对三维地形晕渲的具体需求和存在问题,提出了一种基于色层图与纹理融合的晕渲方法。根据自定义或色层表主色调插值生成色彩连续的色层图,对地形高程进行着色;在地表材质分块的基础上,通过计算相邻材质边界上的多重纹理坐标,使用多重纹理映射进行融合过渡;最后给出了实验结果。