Dynamic Analysis of A Pontoon-Separated Floating Bridge Subjected to A Moving Load

1 .Introduction Since the most significant feature of a movingloadisits mobility,the interaction betweenthe ve-hicle and bridge is very complicated,which can be classified as a coupled vibration problem.There-fore ,much attention has been paid to the dyna…     

传感器电桥电路的非线性修正──用反馈补偿法修正传感器电桥电路的非线性误差

介绍一种反馈补偿法修正传感器电桥电路的非线性。提出反馈补偿原理及应用实例，指出用该方法可获得满意的补偿效果。     

How are large western hemisphere warm pools formed?

During the boreal summer the Western Hemisphere warm pool (WHWP) stretches from the eastern North Pacific to the tropical North Atlantic and is a key feature of the climate of the Americas and Africa. In the summers following nine El Niño events during 1950–2000, there have been five instances of extraordinarily large warm pools averaging about twice the climatological annual size. These large warm pools have induced a strengthened divergent circulation aloft and have been associated with rainfall anomalies throughout the western hemisphere tropics and subtropics and with more frequent hurricanes. However, following four other El Niño events large warm pools did not develop, such that the mere existence of El Niño during the boreal winter does not provide the basis for predicting an anomalously large warm pool the following summer.In this paper, we find consistency with the hypothesis that large warm pools result from an anomalous divergent circulation forced by sea surface temperature (SST) anomalies in the Pacific, the so-called atmospheric bridge. We also find significant explanations for why large warm pools do not always develop. If the El Niño event ends early in the eastern Pacific, the Pacific warm anomaly lacks the persistence needed to force the atmospheric bridge and the Atlantic portion of the warm pool remains normal. If SST anomalies in the eastern Pacific do not last much beyond February of the following year, then the eastern North Pacific portion of the warm pool remains normal. The overall strength of the Pacific El Niño does not appear to be a critical factor. We also find that when conditions favor a developing atmospheric bridge and the winter atmosphere over the North Atlantic conforms to a negative North Atlantic Oscillation (NAO) pattern (as in 1957–58 and 1968–69), the forcing is reinforced and the warm pool is stronger. On the other hand, if a positive NAO pattern develops the warm pool may remain normal even if other circumstances favor the atmospheric bridge, as in 1991–92. Finally, we could find little evidence that interactions internal to the tropical Atlantic are likely to mitigate for or against the formation of the largest warm pools, although they may affect smaller warm pool fluctuations or the warm pool persistence.     

动态最小二乘支持向量机学习算法

针对大样本集的训练问题和动态训练样本的模型更新问题,提出了动态最小二乘支持向量机学习算法.该算法充分利用已建好的模型,逐渐加入新样本,并可删除位于任何位置的非支持向量,避免了矩阵求逆运算,保证了算法的高效率.大坝变形及电离层延迟两个时间序列的预报实例表明,该算法具有计算时间短、预报精度高的特点.     

云南元-磨公路某高堑坡灾害发生机制及防治对策

论文根据现场地质调查,应用地质力学分析方法,分析了元-磨公路K235 160~600段高堑坡地质条件、病害发生机制和诱发因素。堑坡所在区域位于红河深大断裂与哀牢山深大断裂所夹持的哀牢山褶皱带内,属强烈侵蚀切割的低中山区,河流下切严重,河流阶地不发育。南溪河及其支流小曼萨河、叉河依附于不同时期生成的构造发育而成,堑坡位于小曼萨河注入南溪河的交汇部位小曼萨河的左岸。小曼萨河及南溪河所夹持的山体,尤其是堑坡所在的部位,已严重破碎、松弛,岩石似大块石堆垒状,坡面上的树木均明显地向小曼萨河方向倾倒。经地质力学配套分析,堑坡所依附的山梁形成于红河深大断裂生成期(γ4),堑坡岩体受多期构造活动的作用,其中NW65/°SW64°及NW63/°SW35°两组倾向临空的构造面控制坡体的稳定。堑坡具备发生变形破坏的地质条件,分析认为由于组成坡体的岩土强度不足而引起既有构造面的大型坍塌。连续降雨及温差是诱发因素。基于目前国内边坡防治技术、施工能力,提出了以“治”或“避”为主的防治对策。     

PAKSEY大桥桥面线形的测量控制

在PAKSEY大桥的施工过程中,对节段梁的预制、节段梁的悬臂拼装以及桥面体系的施工进行了精密的测量控制,从而使桥面线形与设计线形的误差最小。     

湖南及邻区地壳旋转的可能成因、对大地构造演化的影响及其与大规模成矿作用关系初探

在湖南及邻区,无论从地表的地质构造还是地球物理场上,都表现出明显的环状分布特征。这种特征可能是地壳的旋转运动所造成,它对湖南及邻区大地构造的演化、大规模成矿作用等具有重大的影响。本文对这种旋转运动的可能成因,以及所伴随的一系列地质作用、与大规模成矿作用的关系等进行了初步探讨。     

高速公路桥头跳车病害的分析与治理方法探讨

根据高速公路桥头跳车病害探地雷达检测结果,结合路基实际工程地质资料及沉降观测值,分析出造成此病害的原因是桥与路之间沉降差异所致,故搭板与垫层和垫层与路基之间产生了脱空,造成桥搭板、垫层碎裂而出现了桥头跳车病害.针对病害根源,采用了压密注浆进行搭板加固及重新摊铺沥青混合料进行调坡处理的治理方法.     

GPS静态定位技术在滆湖公路大桥测量中的应用

介绍了利用全球定位系统(GPS)静态定位技术，如何为滆湖公路大桥建立控制网，延伸出时控制网平差方案的确立上，以及如何使控制网中的成果与公路主线控制网中的成果互相兼容，从而为工程的设计与施工提供必要的控制资料。     

福建福安下白石特大桥海上岩土勘察方法

下白石特大桥是同江至三亚国道主干线福鼎至宁德高速公路建设中的一项控制性工程 ,是交通部指定的三阶段设计工程 ,桥长 110 5 m,主跨采用 2× 2 6 0 m预应力混凝土连续钢构。桥位位于白马河入海口处 ,工程地质、水文地质条件复杂 ,通过采用地表大面积的综合地质调查、海上地震映像物探以及海上钻探、原位测试、岩土测试等一系列行之有效的岩土勘察方法 ,确保了岩土工程勘察质量 ,其结果切实可行 ,为后期施工单位提供科学依据。