青藏高原中部湖泊沉积物中Zr/Rb值及其环境意义

由于青藏高原及其周边地区构造复杂,湖泊沉积物中的粒级差别很大,单一的测量方法往往难以奏效。Rb、Zr是表生地球化学过程中的稳定元素,但它们之间也存在显著差别,Rb一般富集在细颗粒中,Zr则在粗颗粒中含量较高。研究发现,湖泊沉积物中Zr/Rb比值与粘土(<2μm)含量存在显著相关,Zr/Rb值反映了湖泊沉积物的粒度大小。Zr/Rb比值所揭示的青藏高原中部280万年来经历的3次大的环境演化过程与岩性变化、孢粉指标反映的环境特征是一致的。     

运城盆地11 kaBP以来气候环境变迁与湖面波动

通过黄土区湖泊沉积研究来恢复古气候、古环境，是对黄土区古气候、古环境研究的补充和检验。通过山西运城盆地硝地湖泊沉积物的多环境代用指标分析，结合史料记载，探讨了该地区11kaBP以来古气候演化和湖面波动的历史。结果表明，该地区存在YD（Younger Dryas）事件，进入全新世后气候有显著的趋势，最高湿润度发生在7．88－5．15和5kaBP后，气候逐渐变干，湖面波动与气候波动相关，全新世早期湖面开始上升，湖泊扩张，5kaBP后湖泊萎缩，盐类结晶析出。     

南四湖,东平湖资源综合开发问题探讨

南四湖，东平湖是华北重要的淡水湖，湖区自然条件优越，资源丰富，有巨大开发潜力。本文分析湖区资源特征，开发利用现状和存在问题，提出合理开发利用途径与对策。     

Stratigraphy of total metals in PIRLA sediment cores

Sediment cores from 30 low-alkalinity lakes in northern New England (NE), New York (NY), the northern Great Lakes States (NGLS) of Minnesota, Michigan, and Wisconsin, and Florida (FL) have been dated by ²¹⁰Pb and analyzed for water and organic content, eight major elements (Al, Ti, Fe, Mn, Ca, Mg, Na, K) plus four trace metals (Pb, Zn, Cu, and V). Variations in the percentages of major elements through time are dominated by long-term independent variations in the abundance of SiO₂, FeO, and to a lesser extent Ca and Al. Additional variations are caused by varying proportions of inorganic matter. Major variations in chemistry are generally unrelated to documented distrubances in the watersheds; most disturbances are minor fires or selective logging.Accelerated accumulation of Pb from atmospheric sources into sediment first occurs in sediment dated between 1800 and 1850 in NY and NE, slightly later in the NGLS region, and about 1900 in FL. Modern accumulation rates in all areas are comparable (ca. 1 to 4 g cm^–2 yr^–1). Accumulation rates of Pb in some lakes have declined significantly from 1975 to 1985. Atmospheric deposition of anthropogenic Zn and Cu is also indicated by generally increasing accumulation rates in sediment cores, but the record is not as clear nor are chemical profiles in all lakes parallel to the trends in atmospheric emissions inferred on the basis of fossil fuel consumption, smelting, and other industrial activities. Inter-lake variations in profiles of Cu and Zn are large. Vanadium accumulation rates increase by the 1940s in NY and NE, but not until the 1950s in the NGLS region. This timing correlates with regional trends in the combustion of fuel oil, a major source of atmospheric V.Acidification of some of the lakes is suggested by decreases in the concentration and accumulation rates of Mn, Ca, and Zn in recent sediment, relative to other elements of catchment origin. The decreases generally occur slightly before the onset of acidification as indicated by diatoms. Increased sediment accumulation rates for Fe may indicate the acidification of watershed soils. The use of the accumulation rate of TiO₂ as an indicator of rates of erosion and for normalization of trace metal accumulation rates is in question for lakes where the flux of TiO₂ from the atmosphere varies and is a significant fraction of the total flux of TiO₂ to the sediment.This is the thirteenth of a series of papers to be published by this journal which is a contribution of the Paleoecological Investigation of Recent Lake Acidification (PIRLA) project. Drs. D. F. Charles and D. R. Whitehead are guest editors for this series.     

基于空间信息技术的堰塞湖库容分析方法研究

快速准确计算堰塞湖库容,对了解地震堰塞湖险情具有重要的意义.利用遥感和地理信息系统等空间信息技术,提出了一种基于像素的三维水面的计算动库容的方法,能准确计算水面为曲面,包括动库容在内的总库容.该方法利用遥感影像提取水体边界线,与DEM求交后可得到带高程的边界点,利用空间插值技术获得三维水面,然后利用库容计算模型求解.同时,在分析该算法计算效率的基础上,提出了基于河流分段的库容计算优化算法,最后通过实验对比分析了该方法的合理性和优越性.     

Numerical Modelling of Dissolving and Driving Exploitation of Potash Salt in the Qarhan Playa——A Coupled Model of Reactive olute Transport and Chemical Equilibrium in a Multi-component Underground Brine System

Firstly, the macroscopic chemical equilibrium state of a series of chemical reactions between intercrystal brine and its media salt layer (salt deposit) in Qarhan Salt Lake was studied by using the Pitzer theory. The concept of macroscopic solubility product and its relation with accumulated ore dissolving ratio were presented, which are used in the numerical model of dissolving and driving exploitation of potassium salt in Qarhan Salt Lake. And secondly, with a model forming idea oftransport model for reacting solutes in the multi-component fresh groundwater system in porous media being a reference, a two-dimensional transport model coupled with a series of chemical reactions in a multi-component brine porous system (salt deposits) was developed by using the Pitzer theory.Meanwhile, the model was applied to model potassium/magnesium transport in Qarhan Salt Lake in order to study the transfer law of solid and liquid phases in the dissolving and driving process and to design the optimal injection/abstraction strategy for dissolving and capturing maximum Potassium/Magnesium in the mining of salt deposits in Qarhan Salt Lake.     

Numerical Modelling of Dissolving and Driving Exploitation of Potash Salt in the Qarhan Piaya——A Coupled Model of Reactive Solute Transport and Chemical Equilibrium in a Multi-component Underground Brine System

Firstly,the macroscopic chemical equilibrium state of a series of chemical reactions between intercrystal brine and its media salt layer (salt deposit) in Qarhan Salt Lake was studied by using the Pitzer theory.The concept of macroscopic solubility product and its relation with accumulated ore dissolving ratio were presented,which are used in the numerical model of dissolving and driving exploitation of potassium salt in Qarhan Salt Lake.And secondly,with a model forming idea of transport model for reacting solutes in the multi-component fresh groundwater system in porous media being a reference,a two-dimensional transport model coupled with a series of chemical reactions in a multi-component brine porous system (salt deposits) was developed by using the Pitzer theory. Meanwhile,the model was applied to model potassium/magnesium transport in Qarban Salt Lake in order to study the transfer law of solid and liquid phases in the dissolving and driving process and to design the optimal injection/abstraction strategy for dissolving and capturing maximum Potassium/ Magnesium in the mining of salt deposits in Qarban Salt Lake.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

A data-driven approach to local gravity field modelling using spherical radial basis functions

We propose a methodology for local gravity field modelling from gravity data using spherical radial basis functions. The methodology comprises two steps: in step 1, gravity data (gravity anomalies and/or gravity disturbances) are used to estimate the disturbing potential using least-squares techniques. The latter is represented as a linear combination of spherical radial basis functions (SRBFs). A data-adaptive strategy is used to select the optimal number, location, and depths of the SRBFs using generalized cross validation. Variance component estimation is used to determine the optimal regularization parameter and to properly weight the different data sets. In the second step, the gravimetric height anomalies are combined with observed differences between global positioning system (GPS) ellipsoidal heights and normal heights. The data combination is written as the solution of a Cauchy boundary-value problem for the Laplace equation. This allows removal of the non-uniqueness of the problem of local gravity field modelling from terrestrial gravity data. At the same time, existing systematic distortions in the gravimetric and geometric height anomalies are also absorbed into the combination. The approach is used to compute a height reference surface for the Netherlands. The solution is compared with NLGEO2004, the official Dutch height reference surface, which has been computed using the same data but a Stokes-based approach with kernel modification and a geometric six-parameter “corrector surface” to fit the gravimetric solution to the GPS-levelling points. A direct comparison of both height reference surfaces shows an RMS difference of 0.6 cm; the maximum difference is 2.1 cm. A test at independent GPS-levelling control points, confirms that our solution is in no way inferior to NLGEO2004.     

New basin modelling results from the Polish part of the Central European Basin system: implications for the Late Cretaceous–Early Paleogene structural inversion

Combined subsidence and thermal 1D modelling was performed on six well-sections located in the north-western Mid-Polish Trough/Swell in the eastern part of the Central European Basin system. The modelling allowed constraining quantitatively both the Mesozoic subsidence and the magnitude of the Late Cretaceous–Paleocene inversion and erosion. The latter most probably reached 2,400 m in the Mid-Polish Swell area. The modelled Upper Cretaceous thickness did not exceed 500 m, and probably corresponded to 200–300 m in the swell area as compared with more than 2,000 m in the adjacent non-inverted part of the basin. Such Upper Cretaceous thickness pattern implies early onset of inversion processes, probably in the Late Turonian or Coniacian. Our modelling, coupled with previous results of stratigraphic and seismic studies, demonstrates that the relatively low sedimentation rates in the inverted part of the basin during the Late Cretaceous were the net result of several discrete pulses of non-deposition and/or erosion that were progressively more pronounced towards the trough axis. The last phase of inversion started in the Late Maastrichtian and was responsible for the total amount of erosion, which removed also the reduced Upper Cretaceous deposits. According to our modelling results, a Late Cretaceous heat-flow regime which is similar to the present-day conditions (about 50 mW/m²) was responsible for the observed organic maturity of the Permian-Mesozoic rocks. This conclusion does not affect the possibility of Late Carboniferous–Permian and Late Permian–Early Triassic thermal events.