安装CB3磁变仪磁系的技巧

安装磁系过程中从竹片上取下吊丝和磁系放入仪器盒时很容易弄断吊丝。若在取下吊丝时在吊丝头的边上滴少许酒精,就很容易取下吊丝了。在磁系放入仪器盒时,若用头发丝或细线粘在纸片上,将纸片放入仪器盒内,轻轻拉紧纸片,磁系靠在纸片上慢慢滑入仪器盒,就不容易弄断吊丝。     

福建省海洋工程装备产业现状与发展对策探讨

近年来,福建海洋工程装备产业进步显著,初步形成了以港口装卸、海上起重机、海底铺管、大型汽车滚装船等传统装备为主导的制造基地;同时,海水淡化核心装备、海洋防腐材料、水下作业机器人、游艇装备等新兴产业也取得了快速发展,但仍存在产业基础薄弱、整体产品低端、研发力量小且分散、试验研发平台严重不足等制约"瓶颈"。文章通过现场调研和资料查询分析了福建海洋工程装备产业的发展现状,总结归纳出当前制约产业发展的主要因素,明确发展思路,提出建设具有海西特色的海工装备制造业应发展海洋工程装备的重点领域、编制福建省海洋工程装备中长期发展规划和实施方案、提升海洋工程装备科技创新能力、制定海洋工程装备发展的扶持政策、构建比较完整的重点领域海洋工程装备产业链等对策与建议。     

无人水下智能海洋测绘装备的机遇与挑战

针对海洋测绘面临的问题,分析了无人时代海洋测绘技术的发展机遇,提出了无人水下智能海洋测绘的新模式,讨论了无人水下智能海洋测绘的技术体系和无人水下智能海洋测绘装备的关键技术,以及无人水下智能海洋测绘的装备产业链,展望了无人水下智能海洋测绘装备的发展趋势及应用前景。     

基于电力线载波通信技术的油田井下设备通信系统

传统的油田井下设备通信系统难以满足油田井下工况恶劣、电磁干扰强、通信距离长等特殊使用环境要求,通信不可靠.基于新型通信技术——电力线载波通信技术,建立油田井下设备电力线模型并分析特性,选择合适载波频率确定通信系统的硬件设计方案,利用软硬件结合方式进行抗干扰设计,研制一种基于电力线载波通信的井下设备通信系统.实验结果表明:该系统通信距离达到3km,准确率为100%,可以满足油田井下及其他恶劣工况环境下设备使用要求,具有一定的应用前景.     

Selection of sand models and identification of parameters using an enhanced genetic algorithm

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.     

A mathematical programming approach for scheduling equipment in a surface coal mining operation

Summary A mathematical programming model for scheduling open pit mining was developed and validated using data from a surface mining operation. A two-phase solution procedure was used involving repeated evaluations of an integer scheduling model and a simple transportation model.     

中心取样空心螺旋钻进法

中心取样空心螺旋钻进法是新发展起来的钻进工艺,阐述了螺旋钻进法的应用与发展.并论述了各种中心取样空心螺旋钻进法的钻具结构与施工方法.包括内钻杆柱式中心取样钻具、绳索升降式中心取样钻具.摩斯取样系统以及詹姆科绳索回收取样装置.     

Fast-changing processes in a medium subject to loading as detected by resistivity measurements

Making measurements of electric resistivity at 16 s intervals, the authors noticed fast changes of this parameter prior to the occurrence of the main fracture. The changes are superposed on bay pulsations of increasing amplitude and decreasing period. This finding opens prospects for a wider use of an electric resistivity method and proves the high quality of automatic instruments, in particular their high resolution. It also gives evidence for the occurrence of short-period precursors in the fracture zone while the main fracture is being formed.     

PTY－8Ⅲ型地震遥测设备的研制及遥测地震台网观测系统的改造

介绍了最新研制的ＰＴＹ－８Ⅲ型地震遥测设备以及北京遥测地震台网观测系统的更新与改造。     

An analysis of coal bump liability in a bump prone mine

Summary This paper presents an analysis of causes of bump in a deep coal mine. The analysis consists of in-mine measurement determination, analysis of physical and mechanical properties of mine materials and simulation of mine layout and mining sequence. Major factors contributing to the causes of bump have been reviewed and those that are related to this case have been identified and simulated analytically using a three-dimensional finite element method.