海拉尔盆地含油气系统

海拉尔盆地为中－新生代的断陷－坳陷型盆地，其发育演化主要经历了地壳隆起、断陷、坳陷、萎缩四个阶段。根据对成藏要素分析，确定出以凹陷为单元的三类含油气系统，各含油气系统都有各自的形成和分布规律。按其空间展布，又可划分为同期并列式、同期交叉式、异期叠合式三种组合形式。这些形式的有效组合，构成了海拉尔盆地内有利的油气聚集带。     

柴达木北缘中生代盆地的成因类型及构造沉积演化

柴达木盆地是我国西部一个大型中新生代陆相含油气盆地。其剖面结构、构造样式、沉积特征、基底沉降、古地温等表明中生代盆地的性质应为挤压环境下经过多次幕式逆冲形成的、也祁连造山带有关的叠置前陆盆地，经历了早株罗世的破裂前陆盆地和中株罗世之后的类前陆盆地的演化过程。柴达缘中生代沉积充填由构造层序I（早株罗世）、构造层序Ⅱ（中侏罗世）和构造层序Ⅲ（晚侏罗世）三个完整的构造层序构成，由粗到细多个沉积旋回代表了逆冲加载过程中由活动期到平静期的转化过程。随着逆冲活动的加强和频率加快，构造层序Ⅳ（白垩纪）只经历逆冲活动期，是不完整的构造层序，发育补偿和过补偿沉积，盆地逐渐萎缩。     

铜陵天马山硫金矿床地质特征及成因探讨

天马山硫金矿床的矿体分为层状矿体、接触带矿体和穿层矿体。层状矿体和穿层矿体受石炭系黄龙组、船山组地层层位和层间断裂控制。接触带矿体受接触带控制 ,具矽卡岩型矿体典型特征。矿床的形成受地层、构造及岩浆岩控制 ,矿床成因为层控矽卡岩型硫金矿床     

川滇密西西比河谷型铅锌矿床成矿流体来源研究:流体Na-Cl-Br体系的证据

应用流体包裹体滤液分析方法，测定了川滇7个MVT铅锌矿床成矿流体的Na,Cl,Br含量，结果表明成矿流体的x(Na/Br)和x(Cl/Br)的平均值分别为185和73，并与高度蒸发浓缩的残留海水的x(Na/Br)和x(Cl/Br)相近。成矿流体的Na,Cl含量呈正相关，在lgNa-lgCl图解中呈线性分布。根据这些事实以及矿床地质特征，认为原始成矿卤水起源于蒸发浓缩的残留海水，原始含矿卤水与富含有机质的大气降水混合导致矿质沉淀而成矿。     

用翁氏模型图版设计早期油气田(藏)开发方案

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。     

西昆仑地区塔木MVT型铅锌矿床成矿作用和成矿物质来源探讨

MVT型铅锌矿是西昆仑地区重要的铅锌矿床类型之一.为了探明西昆仑地区该类型矿床的成矿作用过程和成矿物质来源,本文以塔木矿床为例,在野外调研基础上,进行了光片鉴定、铅硫同位素、稀士元素和成矿元素研究,得到矿石中方铅矿的δ34SCDT为-5.04‰～+3.67‰,反映出油田卤水与深层卤水的混合特征;由铅同位素分析结果计算出表面年龄为461～481 Ma(早于泥盆纪438～410 Ma);由稀土元素分析数据得出岩(矿)石/球粒陨石标准化分配模式图表明,成矿物质主要来自地层.因而判定主要成矿物质可能来源于前泥盆系地层.喜马拉雅期逆冲推覆构造作用所引发的大规模热卤水运移、循环过程,导致矿质的进一步富集、沉淀.     

燕山东段地区与花岗岩有关的几个问题探讨

详细研究了燕山东段地区花岗岩类的侵入时代、产出形式和成因类型 ,指出该区与花岗岩有关的三个金属成矿系列。     

水晶包裹体的类型及成因综述

水晶中的包裹体是在水晶生长过程中被包裹在晶体内的由一相或多相物质组成的封闭系统。水晶中包裹体的形成与生长时的物化条件密切相关 ,而生长过程中的物化环境又直接影响了水晶的结晶习性。     

The Mount Parnitha (Athens) Earthquake of September 7, 1999: A Disaster Management Perspective

Natural Hazards - Strong earthquakes in the proximity of densely inhabited urban areas pose one ofthe most complicated disaster management situations faced by societies today. Herethe experience...     

The Mw = 6.0, 7 September 1999 Athens Earthquake

On 7 September 1999 at 11:56 GMT a destructive earthquake (M_w = 6.0) occurred close to Athens (Greece). The rupture process is examined using data from the Cornet local permanent network, as well as teleseismic recordings. Data recorded by a temporary seismological network were analyzed to study the aftershock sequence. The mainshock was relocated at 38.105°N, 23.565°E, about 20 km northwest of Athens. Four foreshocks were also relocated close to the mainshock. The modeling of teleseismic P and SH waves provides a well-constrained focal mechanism of the mainshock (strike = 105°, dip = 55° and rake = -80°) at a depth of 8 km and a seismic moment M₀ = 1.010²⁵ dyn·cm. The obtained fault plane solution represents normal faulting indicating an almost north-south extension. More than 3500 aftershocks were located, 1813 of which present RMS < 0.1 s and ERH, ERZ < 1.0 km. Two main clusters were distinguished, while the depth distribution is concentrated between 2 and 11 km. Over 1000 fault plane solutions of aftershocks were constrained, the majority of which also correspond to N–S extension. No surface breaks were observed but the fault plane solution of the mainshock is in agreement with the tectonics of the area and with the focal mechanisms obtained by aftershocks. The hypocenter of the mainshock is located on the deep western edge of the fault plane. The relocated epicenter coincides with the fringe that represents the highest deformation observed on the differential interferometric image. The calculated source duration is 5 sec, while the estimated dimensions of the fault are 15 km length and 10 km width. The source process is characterized by unilateral eastward rupture propagation, towards the city of Athens. An evident stop phase observed in the recordings of the Cornet local stations is interpreted as a barrier caused by the Aegaleo Mountain.